[Stock ROMs](OneClicks Master Collection)+[Kernels (Stock & w/ CWM)]+[Modems] UPDATED
Disclaimer: I am not responsible for loss, damages or any other kind of issue that can arise from flashing any of these packages. FYI: All these packages are tested by me on my device.
PS: Most of OneClick are rar packages, you have to unpack them in order to get Odin One Click Downloader. Stock Kernels are tar packages, Odin flashable.
PS: Odin3 v1.85 (to flash kernels) is attached to this post, in case you don't have one.
Thanks to designgears, 4-2ndtwin, Cezar, Boog, Przekret, AdamOutler and many more developers..
Disclaimer: I am not responsible for loss, damages or any other kind of issue that can arise from flashing any of these packages. FYI: All these packages are tested by me on my device.
PS: Most of OneClick are rar packages, you have to unpack them in order to get Odin One Click Downloader. Stock Kernels are tar packages, Odin flashable.
I897UCJF6 Android 2.1 Eclair
With Bootloaders - Link to thread - by designgears
Without Bootloaders - Link 1 / Link 2 - ROM by Cezar, OneClick by me.
Without Bootloaders - Link 1 / Link 2 - ROM by Cezar, OneClick by me.
I897UCKB2 Android 2.2 Froyo
Heimdall One-Click - Link to thread - by AdamOutler (Stand alone executable file)
I897UCKF1 Android 2.3.3 Gingerbread
With Bootloaders - Link 1 / Link 2
Without Bootloaders - Link 1 / Link 2, Also done by Mike. Here is the link to his thread. (I overlooked it probably while digging for OneClicks)
Stock Kernel - Link 1 / Link 2
Kernel with CWM - To get CWM only for further flashing purpose, use DG's Cognition 5 initial kernel from his thread
Without Bootloaders - Link 1 / Link 2, Also done by Mike. Here is the link to his thread. (I overlooked it probably while digging for OneClicks)
Stock Kernel - Link 1 / Link 2
Kernel with CWM - To get CWM only for further flashing purpose, use DG's Cognition 5 initial kernel from his thread
I897UCKH3 Android 2.3.4 Gingerbread
With Bootloaders - Link 1 / Link 2 [With CWM Injected Kernel from Boog]
Heimdall One-Click, With Bootloaders - Link to thread - by AdamOutler (Stand alone executable file)
Without Bootloaders - Link to thread - by 4-2ndtwin [With CWM Injected Kernel from Boog]
Heimdall One-Click, Without Bootloaders - Link to thread - by
Kernel with CWM - Link to thread - by Boog
Heimdall One-Click, With Bootloaders - Link to thread - by AdamOutler (Stand alone executable file)
Without Bootloaders - Link to thread - by 4-2ndtwin [With CWM Injected Kernel from Boog]
Heimdall One-Click, Without Bootloaders - Link to thread - by
Kernel with CWM - Link to thread - by Boog
I897UCKI2 Android 2.3.5 Gingerbread
With Bootloaders - Link to thread - Second Post [With CWM Injected Kernel from Boog]
Without Bootloaders - Link to thread [With CWM Injected Kernel from Boog]
Stock Kernel - Link 1 / Link 2
Kernel with CWM - Link to thread - by Boog
Without Bootloaders - Link to thread [With CWM Injected Kernel from Boog]
Stock Kernel - Link 1 / Link 2
Kernel with CWM - Link to thread - by Boog
I897UCKJ3 Android 2.3.5 Gingerbread
I897UCKK1 Android 2.3.5 Gingerbread
DOWNLOAD INSTRUCTIONS:
-Perform a factory reset on your phone. (Optional, recommended)
-Download any OneClickOdin package to your desktop.
-Be sure you have the Captivate drivers installed on your computer.
-Right click and Run as admistrator the Odin.
-Remove your sim card and external sdcard from you phone.
-Put your phone into download mode. (Press and hold both volume buttons and insert USB cable into phone)
-Wait for Odin to recognize your device. Yellow com port will light up.
-Click the big Start Button.
-Sit back and watch. This should only take between 2 or 3 minutes to complete.
-When the process is finished and your phone begins to reboot and you see the at&t screen you may go ahead and unplug the micro usb from your phone.
TIP:
Once you're on AT&T GB Bootloaders, I would advice you to use bootloader free package always in future. So far AT&T GB bootloaders have been backward compatible with all I897 (even I9000) Froyo/Eclairs ROMs. I have used I9000 based ROMs with AT&T GB BLs. Someone in CM7 thread claimed to use AT&T GB bootloaders with CM7 without any problem.
PS: Odin3 v1.85 (to flash kernels) is attached to this post, in case you don't have one.
Thanks to designgears, 4-2ndtwin, Cezar, Boog, Przekret, AdamOutler and many more developers..
Attachments
Last edited by a moderator: