YOU MUST BE ON .906 OTA TO USE THIS
**If you are on .890 ota please download and use this file>>D3.SBF.890.ZIP (flash via rsdlite)**
UPDATED THE 1 CLICK SBF EXE TO THE OFFICIAL .906 SBF
now you can restore you D3 to factory .906
I created a 1-click-sbf.exe to make flashing as simple as possible.
The exe when ran will extract files to a temp dir (if needed)
to make it easy for you to delete manually or most window cleaners will clean the temp folder.
thus you don't have to have that much room taken up on your hard drive all the time..
when you start the exe it will check the temp folder to see if the files still remain..
if they do it will not need to extract the files thus starting much quicker!
I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE
DOWNLOAD: http://d-h.st/Z7b
PLEASE DONT FORGET TO CLICK THE LITTLE THANKS BUTTON...
1. Download the above file to computer
2. Get a beer
3. If you have a spare battery, or the current battery, make sure it's charged above 50%
(quick unbrick wont run if it's below 50%)
4. When the phone is off, press m+power and scroll down to AP Fastboot.
5. Plug the phone into the computer, make sure you get the USB connected message on the phone.
6. Run the "1_CLICK_SBF.exe" (win 7 users right click on .exe and run as administrator)
7. Let your phone restore and boot.
8. Finish that beer your done..wasn't that easy..
====================
MOTOFAIL ROOT TOOL ( this is also a 1_click .exe... )
Download: HERE
NEW! SAFESTRAP v3 for DROID 3
Download v3.05 [ 2012-10-17 ]
md5sum: 39b1cd260e00d5d73faa7f27b7e31d25
SAFESTRAP (TWEAKED) v1.08e RECOVERY (NON-KEXEC)
Download:HERE
NEW! ADOBE FLASH .APK DOWNLOAD
Download:HERE
====================
Credits:
Q9nap
Hashcode
Redsox985
Psouza4
droidian1441
PLEASE DONT FORGET TO CLICK THE LITTLE THANKS BUTTON...
YOU MAY NOT COPY OR RE-POST OUR WORK WITHOUT PERMISSION
**If you are on .890 ota please download and use this file>>D3.SBF.890.ZIP (flash via rsdlite)**
UPDATED THE 1 CLICK SBF EXE TO THE OFFICIAL .906 SBF
now you can restore you D3 to factory .906
I created a 1-click-sbf.exe to make flashing as simple as possible.
The exe when ran will extract files to a temp dir (if needed)
to make it easy for you to delete manually or most window cleaners will clean the temp folder.
thus you don't have to have that much room taken up on your hard drive all the time..
when you start the exe it will check the temp folder to see if the files still remain..
if they do it will not need to extract the files thus starting much quicker!
I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE
DOWNLOAD: http://d-h.st/Z7b
PLEASE DONT FORGET TO CLICK THE LITTLE THANKS BUTTON...
1. Download the above file to computer
2. Get a beer
3. If you have a spare battery, or the current battery, make sure it's charged above 50%
(quick unbrick wont run if it's below 50%)
4. When the phone is off, press m+power and scroll down to AP Fastboot.
5. Plug the phone into the computer, make sure you get the USB connected message on the phone.
6. Run the "1_CLICK_SBF.exe" (win 7 users right click on .exe and run as administrator)
7. Let your phone restore and boot.
8. Finish that beer your done..wasn't that easy..
====================
MOTOFAIL ROOT TOOL ( this is also a 1_click .exe... )
Download: HERE
NEW! SAFESTRAP v3 for DROID 3
Download v3.05 [ 2012-10-17 ]
md5sum: 39b1cd260e00d5d73faa7f27b7e31d25
SAFESTRAP (TWEAKED) v1.08e RECOVERY (NON-KEXEC)
Download:HERE
NEW! ADOBE FLASH .APK DOWNLOAD
Download:HERE
====================
Credits:
Q9nap
Hashcode
Redsox985
Psouza4
droidian1441
PLEASE DONT FORGET TO CLICK THE LITTLE THANKS BUTTON...
YOU MAY NOT COPY OR RE-POST OUR WORK WITHOUT PERMISSION
Last edited: