I may be wrong, but you're not going to 'see' a minor update here. If you've donated (and it is so worth it) you can update within the app on your PC. Read his posts, I'll quote here:
[Galaxy Note2 TOOLKIT V6 ATT] Drivers, Backup, Root, Recovery, Flash Stock Image
- Thread starter mskip
- Start date
-
- Tags
- development
Select model 31 at startup for Telus now as I have split up the Models fully (although they are pretty much the same).
Mark.
I havent seen any lists but if there is anything then you will most probably find it in the themes & apps forum.
I am planning on adding a debloat function in the new year to remove carrier added apps but I will have to colaborate with users when the time comes to start work on it as im sure different carriers will have different apps that can be removed.
Mark.
I'm trying this out for the first time and loving it. How much easier can this get? No searching around everywhere for the proper files. This is beautiful! Thanks for your hard work. Something minor I thought I'd point out that I noticed while using this, it reads "you should see RESET in the top left box turns green". With this newer version of Odin, it now turns blue, who knew. Just thought you might want to know as this may confuse some noobs 
Attachments
Great work again. Just recently donated for the Nexus 4 one, then picked up a GN2 and donated again for this version . Makes life a lot easier!
. Makes life a lot easier!
Let me know if you need anything from a sgh-i317M Telus model. I have made a nandroid of stock, except recovery. I also made a dd backup of system and modem.
Thanks Mark!
Phone: Galaxy Note II - SGH-i317M* Provider: Telus Rom: Stock (JB 4.1.1) (unrooted) Kernel: Stock Recovery: TWRP
--------------
Thanks to the Devs hard work and the power of sharing!
Odin
Hi Mskip....can I use any other version of Odin? I use a small netbook with a 10" screen and can't see the start button which must be at the bottom now which is cut off instead of mid-way down the panel as on the earlier versions of Odin.
Thanks....Later
Either that,or can I change the window size in the new one?
Hi Mskip....can I use any other version of Odin? I use a small netbook with a 10" screen and can't see the start button which must be at the bottom now which is cut off instead of mid-way down the panel as on the earlier versions of Odin.
Thanks....Later
Either that,or can I change the window size in the new one?
Last edited:
TWRP vs CWM with Toolkit
I have TWRP as my recovery, not CWM. Will TWRP work with the toolkit, or should I flash CWM?
I have TWRP as my recovery, not CWM. Will TWRP work with the toolkit, or should I flash CWM?
Long time no see skip..........
Loving this tool. Really useful in tons of ways. Thank you.
Loving this tool. Really useful in tons of ways. Thank you.
Last edited:
+1. For that would we use the International LTE version L1 build, or should we wait for an update?
Sent from my SAMSUNG-SGH-I317 using Xparent ICS Tapatalk 2
Will you be updating with the latest OTA upgrade included? I couldn't get the OTA, but did flash it via the update.zip method, and it worked, although it broke root. I don't want to use this tool to reroot because it's based on the older version - or does this make a difference?
INTRODUCING THE SAMSUNG GALAXY NOTE2 TOOLKIT
HOW TO VIDEOS ARE ON POST#4 (THANKS TO WWJOSHDEW) MAKE SURE YOU HAVE A LOOK AT THEM AS A VIDEO IS WORTH A THOUSAND WORDS
Looks like the How To Videos are on post #4 of this thread.
http://xdaforums.com/showthread.php?t=1957720
I'd also like to know about rooting after updating with the 4.1.2 update.zip. Is it safe to use the 4.1.1 mode from the tool or not? Would be great to know!
I didn't hear anything, so I used CF-Root. I didn't feel safe rooting with the older version, I may be wrong, but better safe than sorry.I'd also like to know about rooting after updating with the 4.1.2 update.zip. Is it safe to use the 4.1.1 mode from the tool or not? Would be great to know!
Similar threads
- Locked
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
85[TOOLKIT] UNIFIED ANDROID TOOLKIT - SAMSUNG GALAXY NOTE 2 - Drivers, Root, Recovery + MORE
GSM (GT-N7100) and LTE (GT-N7105) SUPPORTED. THREAD: http://xdaforums.com/showthread.php?t=1923956
AUSTRALIAN GSM (GT-N7100T) and LTE (GT-N7105T) SUPPORTED. USE GSM THREAD
SPRINT (SPH-L900) SUPPORTED. THREAD: http://xdaforums.com/showthread.php?t=1957155
TMOBILE (SGH-T889) SUPPORTED. THREAD: http://xdaforums.com/showthread.php?t=1957720
MOBILICITY, VIDEOTRON, WIND [SGH-T889V] SUPPORTED. NO THREAD YET. USE TMOBILE THREAD
AT&T (SGH-L317) SUPPORTED. THREAD: http://xdaforums.com/showthread.php?t=2052779
BELL, ROGERS, SASKTEL, TELUS [SGH-I317M] SUPPORTED. NO THREAD YET. USE AT&T THREAD
VERIZON ([SCH-I605]) SUPPORTED. THREAD: http://xdaforums.com/showthread.php?t=2052788
US CELLULAR (SCH-R950) SUPPORTED. NO THREAD YET. USE ANY
KOREAN SK TELECOM [SHV-E250S] SUPPORTED. NO THREAD YET. USE ANY
The Unified Android Toolkit supports a multitude of Nexus and Samsung devices with more devices being added all the time. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT V1.3.4 [9TH JAN 2015]
* Install correct adb/fastboot drivers automatically on Windows xp/vista/7/8 32bit+64bit
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your data from selectable folders [internal or external storage] to your PC for a Full Safe backup of data
* Unlock/Re-Lock your Bootloader [Nexus]
* Root Stock builds
* Various Root options using insecure boot image or custom recovery
* ALLINONE to Unlock, Root, Rename the Restore Files and install busybox [Nexus]
* ALLINONE to flash custom Recovery Root, Rename the Restore Files and install busybox [Samsung]
* Install BusyBox on your device
* Perform a FULL NANDROID Backup of your system (Boot, Cache, Data, Recovery and System) via adb and save in Custom Recovery format on your PC which can be Restored via CWM Recovery [if insecure boot image available]
* Fix extSdCard write permissions from installed apps in Android 4.4+ [Samsung]
* Pull /data and /system folders, compress to a .tar file and save to your PC [if insecure boot image available]
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC [if insecure boot image available]
* Extras, Tips and Tricks section
* Auto Update ToolKit to latest available version at startup (professional only feature)
* Program up to 10 Quickpick slots and run them very quickly (professional only feature)
* Mods section to automatically perform certain tasks on your device
* Download Google Stock Image directly to correct ToolKit folder for extracting and flashing [Nexus]
* Check md5 of stock image to make sure downloaded file isn't corrupted before flashing [Nexus]
* Download Samsung Stock Firmware to PC for extracting and flashing via Odin [Samsung]
* Flash Custom Recovery or Google Stock Image to Device
* Rename the Recovery Restore File present on some Stock Roms
* Boot into CWM Touch, TWRP, Philz Touch Recovery or Stock Recovery without Flashing it [Nexus]
* Flash Custom Recovery to Device
* Boot [Nexus] or Flash .img Files directly from your PC
* Install a single apk or multiple apk's to your device
* Push Files from your PC to your device
* Pull Files from your device to your PC
* Disable forced encryption on Nexus6 and Nexus9 devices
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps [calls log, sms, contacts]
* Install EFS/Partition Backup/Restore app by Wanam
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Set Files Permissions on your device
* Open new Command Prompt for manual input
* Reboot device to Fastboot Mode or Android from fastboot mode [Nexus]
* Reboot device to Fastboot Mode [Nexus], Recovery, Android or Download Mode [Samsung] from adb mode
* Display Important Information about your device
--------------------------------------------------------------
SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: As the exe files are not Digitally Signed with a Microsoft Certificate they 'may' get picked up as potentially harmful by Antivirus Programs and deleted on first run. If this happens restore the file and exclude it from future scans to use it. This seems to happen mostly on AVG Free and Norton which is why I switched to BitDefender which is much better.
Credits: Chainfire for SuperSU, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE YOUR DEVICE. NOTHING IS RESTRICTED.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR 'AUTO UPDATES' DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE 'QUICK PICKS' SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE "ANY BUILD" OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD (USEFUL IF YOUR BUILD IS NOT LISTED).
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
How to get into Recovery Mode
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
How to get into Download Mode (For Odin)
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.11**FAQ**
Q. What is ADB Shell?
Adb shell is a linux command line tool (because android is based on linux) used to send commands to your android device. For S-ON devices, this is crucial for modifying files in the /system partition (where the rom sits) as you cannot modify anything in /system when the rom is running without S-OFF (e.g removing system apps).
From Google:
Android Debug Bridge (adb) is a versatile tool lets you manage the state of an emulator instance or Android-powered device. It is a client-server program that includes three components:
A client, which runs on your development machine. You can invoke a client from a shell by issuing an adb command. Other Android tools such as the ADT plugin and DDMS also create adb clients.
A server, which runs as a background process on your development machine. The server manages communication between the client and the adb daemon running on an emulator or device.
A daemon, which runs as a background process on each emulator or device instance.
----------------------------------------------------------------------------
Q. I flashed CWM but each time I reboot the Stock Recovery is back
There is an auto recovery restore system on Android that will reflash the Stock Recovery if you flash CWM on a Stock Rom.
Use Root Explorer to Mount the system folder as R/W (or use a free app from the Market). Delete the file recovery-from-boot.p from /system. Now when you flash CWM Recovery it will NOT be overwritten after a reboot. You can also use the Toolkit to rename the files if you wish.
----------------------------------------------------------------------------
Q. What is the difference between Nandroid and Titanium backup?
A NANDROID will backup the whole system including boot, system, data and recovery partitions so you can restore a complete rom and all data and settings.
Essentially Titanium Backup is used to backup apps and associated user data. These could be restored AFTER a full wipe and a new Rom had been flashed on your phone.
The other option now which google added into the new adb command list is the adb backup which is in the ToolKit and can do the same job as Titanium Backup but will store the data on your PC rather than on the phone (where it takes up space and could be deleted).
----------------------------------------------------------------------------
Q. When would i perform a nandroid vs a titanium backup?
You would perform a nandroid backup to back up your entire system including boot image and data and system partitions so you can restore your entire system back to that particular point in the future.
You would use Titanium Backup mainly to back up your installed apps and settings so they could be reinstalled easily and quickly on any future roms. You can also choose individual apps to backup or restore on Titanium Backup whereas if you restore your boot partition via CWM Recovery you are stuck with the whole lot.
----------------------------------------------------------------------------
Q. When I try to open the ToolKit I get a box pop up for a split second and then it goes away. My AntiVirus program says the file may be harmful.
The exe files I compiled are not digitally signed with a Microsoft certificate (as they cost money) so certain AntiVirus programs (mainly Norton and AVG Free) will pick it up as potentially harmful when it is not. They pick up ANY file that doesnt contain a purchased Microsoft certificate in the same way. Restore the deleted file and exclude it from further scans and it will be fine.
----------------------------------------------------------------------------
Q. I donated but where do I get my activation code from?
Donation Codes are sent out manually to your PayPal email address [unless otherwise stated] after a confirmation email from PayPal has been receive. The Code can then be entered in the ToolKit Settings, Activate Donators Features Screen. This will enable The Auto Updates, Quick Picks and Extras Features in the ToolKit. Please be patient when waiting for the Code to be sent as it depends very much on what I am doing and whether I am at my PC when the donation is made. Please do not post in the ToolKit's thread or pm me asking for the activation code as it clogs up the thread and my messages. If you haven't received your code after 24 hours then feel free to email me via the skipsoft.net contact page.
Don't worry that you have been forgotten about, I check all emails personally and will deal with it as soon as I can.
----------------------------------------------------------------------------
Q. I have Windows 8 and cannot install the drivers
How to Disable Driver Signature Enforcement in Windows 8:
From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the pop-out bar to appear, then click the Gear icon).
Click ‘More PC Settings’.
Click ‘General’.
Scroll down, and click ‘Restart now’ under ‘Advanced startup’.
Wait a bit.
Click ‘Troubleshoot’.
Click ‘Advanced Options’
Click ‘Windows Startup Settings’
Click Restart.
When your computer restarts, select ‘Disable driver signature enforcement‘ from the list. You can now load your modified driver. Reboot again once the driver is installed and all will be well.
----------------------------------------------------------------------------
Q. I flashed the Stock Firmware Image. Odin flashes the file successfully and the phone reboots but it stays stuck on the samsung logo
If the firmware tar file does not include a userdata image (which most Samsung firmware do not) then your userdata partition will be left from your previous setup. If this is incompatible with the new firmware because of build or something else then your system will freeze on boot up.
This is easily fixable by holding the Volume UP, Home and Power buttons all at the same time for about 10 seconds until the device reboots to the Stock Recovery screen. Use the Volume Down button to scroll down to 'wipe data/factory reset' and press the Home button to select it. Go down to yes to confirm and your userdata partition will be wiped. Your device should now boot fine.9SAMSUNG GALAXY NOTE 2 TOOLKIT AUTO UPDATE V4.0.0 [27TH MARCH 2013] AVAILABLE!!
Changelog:
+Updated complete Toolkit structure for easier support and faster updates
+Added GT-N7100T and GT-N7105T models to the support list
+Added 4.1.2 support for many models. See below image for full list
+Updated CWM and TWRP Recovery to the latest model specific version
+Added TWRP NAND backup/restore procedure to backups section
+Updated SuperSU Root procedure to V1.25
+Updated Samsung usb drivers to 1.5.18.0
+Added more error detection and updated many parts of the Toolkit procedures
+Added Activation option and support procedure for new builds to Model Screen
+Updated Stock firmware download section with new Samsung images
+Updated mods section
Model specific Boot and Recovery files are now downloaded after the Model/build has been selected. This means that you no longer have to download files for a model you do not own (which for 12 supported models would be a huge download size). This also makes it much easier to add support for new builds as the model file can be updated and uploaded on an individual basis. If for some reason you cannot download the model file from the Toolkit then you can grab it from http://goo.im/devs/mskip/toolkit/galaxy_note2/model_files and extract the files to the relevant folders.
As this is such a major update for the Note2 Toolkit I will let the Professional Version users test it for a day to make sure everything is working as I cannot test it on all variants. In the meantime I will start building the Public Version and if everything is ok I will release V4.0.0 to everyone Friday morning.
[Auto Updates are only accessible if you have donated to the Toolkit project, received an activation code and unlocked the professional features. Auto Updates are a much faster and easier way of pushing small updates that would otherwise not be worth doing. I can push a single textual change or add support for a new build without having to go through the whole process of building a full version and uploading a large file. IF you are not able to or do not want to donate to unlock the Auto Update feature (and other professional features) then all the smaller updates are collated and a full build made when I have time or if there are enough updates to warrant it. This is the easiest way to make sure all the Toolkits are as up to date as possible. IF you have any views about this please pm me about them and do not post in the open thread]
Mark.7SAMSUNG GALAXY NOTE 2 TOOLKIT V3.0.0 [18TH DEC 2012] RELEASED!!
ChangeLog
ToolKit v3.0.0 (18th December 2012)
+Rewrote soo many parts its hard to list them all
+Changed the Model Selection screen
+Split up images for all supported models to make them easier to distinguish
+Added support for Verizon, GT-N7105 (lte), AT&T and Korean SK Telecom
+Added new options to Root/Unroot Screen
+Added root+busybox+rename recovery restore files via Custom Recovery
+Added Root/Unroot via Sideload feature in Recovery
+Updated CWM Recovery to 6.0.1.9
+Updated TWRP Recovery to 2.3.2.3 for all available Models
+Added Stock Recovery and boot images for ALL Models
+Updated SuperSU to 0.99
+Added Device Information Screen
+Added instant reply donate link to Toolkit
+Soo many more behind the scene changes
This release is a very big update and has soo many changes I can't list them all above.
There is no Auto Update available to V3.0.0 as the new file structure I have adopted means the Auto Update is nearly as big as the full version. Please download the full version from the first post and then you can Auto Update to future versions from there.
If I missed any models please let me know and I will have to add them as an Auto Update.
Lastly if you find any bugs or errors please let me know as there are soo many changes and new models I couldnt possibly test them all on my Note2 (gsm). All the core functions are working there just might be some typos (I hope).
Enjoy
Mark.
