Why not? If it is true, I'm gonna tagging "Fap Fap Fap"
Sent from my little monster GS2
For each parameter there's a sample script-line. And i'm already giving recommended settings for battery/performance by briefing each tunable right?Wouldve preferred either script, or recommended settings for extweaks for different purposes.. but cant have it all.
you are simply the best when it comes to kernels, your knowledge on kernels is outstanding!
Yep dude, you can use both of them at the same time for maximum tweaksHi everyone,
Can someone tell me please and excuse me for asking this noob question, is it okay to use voltage control together with EXATWEAKS?
Because i do not see an option to set the voltages with EXtweaks,or am i missing something?
Thanks...
If the new rom has a kernel other than Siyah, then you lose dual boot only temporarily. Once you flash Siyah, dual boot should be back as long as you haven't done anything to data.img and cache.img inside /sdcard/.secondromHi,
once again you amaze us with an extraordinary topic, informative and so easy to read. Thanks a lot. I'll translate in french . I have a question: is it normal to lose dualboot when flashing a new. Primary rom? The second is still present at/ sdcard/.secondr and I flashed back the Siyah kernel 3.1RC6. THanks in advance.
I'm not sure about how can a headset button wake the device from deep sleep.
While phone's is charging - whether it's wall charger or usb charger, enough interrupts are fired from time to time that prevents phone from going into deep sleep, so it will respond to headset buttons.
+1
echo "75" > /sys/devices/system/cpu/cpufreq/pegasusq/up_threshold
echo "65" > /sys/devices/system/cpu/cpufreq/pegasusq/up_threshold_at_min_freq
echo "40000" > /sys/devices/system/cpu/cpufreq/pegasusq/sampling_rate
echo "2" > /sys/devices/system/cpu/cpufreq/pegasusq/sampling_down_factor
echo "10" > /sys/devices/system/cpu/cpufreq/pegasusq/down_differential
echo "60" > /sys/devices/system/cpu/cpufreq/pegasusq/freq_step
echo "400000" > /sys/devices/system/cpu/cpufreq/pegasusq/freq_for_responsiveness
echo "10" > /sys/devices/system/cpu/cpufreq/pegasusq/cpu_up_rate
echo "20" > /sys/devices/system/cpu/cpufreq/pegasusq/cpu_down_rate
echo "400000" > /sys/devices/system/cpu/cpufreq/pegasusq/hotplug_freq_1_1
echo "300000" > /sys/devices/system/cpu/cpufreq/pegasusq/hotplug_freq_2_0
echo "200" > /sys/devices/system/cpu/cpufreq/pegasusq/hotplug_rq_1_1
echo "150" > /sys/devices/system/cpu/cpufreq/pegasusq/hotplug_rq_2_0
echo "0" > /sys/devices/system/cpu/cpufreq/pegasusq/ignore_nice_load
echo "1" > /sys/devices/system/cpu/cpufreq/pegasusq/io_is_busy
echo "0" > /sys/devices/system/cpu/cpufreq/pegasusq/max_cpu_lock
echo "0" > /sys/devices/system/cpu/cpufreq/pegasusq/hotplug_lock
echo "90" > /sys/devices/system/cpu/cpufreq/pegasusq/up_threshold
echo "80" > /sys/devices/system/cpu/cpufreq/pegasusq/up_threshold_at_min_freq
echo "60000" > /sys/devices/system/cpu/cpufreq/pegasusq/sampling_rate
echo "1" > /sys/devices/system/cpu/cpufreq/pegasusq/sampling_down_factor
echo "5" > /sys/devices/system/cpu/cpufreq/pegasusq/down_differential
echo "20" > /sys/devices/system/cpu/cpufreq/pegasusq/freq_step
echo "300000" > /sys/devices/system/cpu/cpufreq/pegasusq/freq_for_responsiveness
echo "15" > /sys/devices/system/cpu/cpufreq/pegasusq/cpu_up_rate
echo "15" > /sys/devices/system/cpu/cpufreq/pegasusq/cpu_down_rate
echo "500000" > /sys/devices/system/cpu/cpufreq/pegasusq/hotplug_freq_1_1
echo "300000" > /sys/devices/system/cpu/cpufreq/pegasusq/hotplug_freq_2_0
echo "350" > /sys/devices/system/cpu/cpufreq/pegasusq/hotplug_rq_1_1
echo "200" > /sys/devices/system/cpu/cpufreq/pegasusq/hotplug_rq_2_0
echo "0" > /sys/devices/system/cpu/cpufreq/pegasusq/ignore_nice_load
echo "1" > /sys/devices/system/cpu/cpufreq/pegasusq/io_is_busy
echo "0" > /sys/devices/system/cpu/cpufreq/pegasusq/max_cpu_lock
echo "0" > /sys/devices/system/cpu/cpufreq/pegasusq/hotplug_lock
echo "80" > /sys/devices/system/cpu/cpufreq/pegasusq/up_threshold
echo "40" > /sys/devices/system/cpu/cpufreq/pegasusq/up_threshold_at_min_freq
echo "40000" > /sys/devices/system/cpu/cpufreq/pegasusq/sampling_rate
echo "2" > /sys/devices/system/cpu/cpufreq/pegasusq/sampling_down_factor
echo "5" > /sys/devices/system/cpu/cpufreq/pegasusq/down_differential
echo "40" > /sys/devices/system/cpu/cpufreq/pegasusq/freq_step
echo "200000" > /sys/devices/system/cpu/cpufreq/pegasusq/freq_for_responsiveness
echo "10" > /sys/devices/system/cpu/cpufreq/pegasusq/cpu_up_rate
echo "20" > /sys/devices/system/cpu/cpufreq/pegasusq/cpu_down_rate
echo "400000" > /sys/devices/system/cpu/cpufreq/pegasusq/hotplug_freq_1_1
echo "300000" > /sys/devices/system/cpu/cpufreq/pegasusq/hotplug_freq_2_0
echo "300" > /sys/devices/system/cpu/cpufreq/pegasusq/hotplug_rq_1_1
echo "200" > /sys/devices/system/cpu/cpufreq/pegasusq/hotplug_rq_2_0
echo "0" > /sys/devices/system/cpu/cpufreq/pegasusq/ignore_nice_load
echo "1" > /sys/devices/system/cpu/cpufreq/pegasusq/io_is_busy
echo "0" > /sys/devices/system/cpu/cpufreq/pegasusq/max_cpu_lock
echo "0" > /sys/devices/system/cpu/cpufreq/pegasusq/hotplug_lock
kmemhelper -n <var_name> -t <var_type> -o <offset_value> <new_variable_value>
Ex: kmemhelper -n mxt224_data -t char -o 59 50