Collection and discussion of assemblies of Android OS

Search This thread

Supermen`

Member
Nov 16, 2011
39
19
Елабуга
acer-club.ru
I know English badly, but I think you me will understand. ;)
8615Acer_Android_NEW.jpg

Here we spread assemblies and we discuss Android OS.
About developers:
People who worked over development of Android: holo, estratos, tsamolotoff, LytkinAnton, Em-l.
People who work over development of Android: wstorm.
People who work over Android assemblies: supermen'
Huge work on development of Android Em-l, for what to it did many thanks!

How to start Android:
To start to be necessary:
1) Android OS assembly
2) SD Card

That it is necessary to do:
1) Download assembly (we look for below)
2) Format SD in FAT32
3) Unpack assembly on a flash card, the way should look so: sdcard/android (in this folder Haret should lie)
4) In the folder with assembly find and start Crlcad (on the screen there is nothing won't occur), and then Haret.
5) Wait for 10-20 minutes.

Attention! It is required an empty seat from 1,5 Gb.

IT IS OBLIGATORY TO READ: MINI-FAQ

P. S. The subject will develop! I will add soon: mini-faq, assemblies, and is a little more information.
P. S. S. If you have offers how to call a subject on another, offer.
 
Last edited:

Supermen`

Member
Nov 16, 2011
39
19
Елабуга
acer-club.ru
Android 2.2.1 by wstorm
Description:
Most last assembly of Android 2.2.1 at present.
That works:
GSM/GPRS/3G
3D-accelerator *
Outcoming calls
Entering SMS
Proceeding SMS
Bluetooth
USB
Voice search
Microphone
Sound
Chamber **
Wi-Fi
Font
Management of illumination
GPS
* Works not completely
** Doesn't photograph
to download
 
  • Like
Reactions: nomadfromx

Supermen`

Member
Nov 16, 2011
39
19
Елабуга
acer-club.ru
Android 2.2.1 Light by supermen`
Description:
- Last kernel
- There is root
- Cool boot animation
- New browser (replacement standard)
- The new program for a file transfer through bluetooth (replacement standard)
- Speed of work is increased
- Power consumption is reduced
- It is not connected to the Internet (wait for correction, meanwhile I do not know in what business)
That works:
GSM/GPRS/3G (only with NEW SIM CARDS)
3D-accelerator **
Outcoming calls
Entering SMS
Proceeding SMS
Bluetooth
USB
Voice search
Microphone
Sound
Камера*
G-Sensor
Wi-Fi
GPS
*Не photographs
** Works not completely
to download
 
  • Like
Reactions: nomadfromx

Supermen`

Member
Nov 16, 2011
39
19
Елабуга
acer-club.ru
Android 2.3.7 (Gingerbread) by supermen`​
Advantages of assembly:
*Otlichny speed of work
*It is built in "Beats Auidio" fashions that does a sound more best
*There is a root
*Beautiful design
*All last practices
That works:
GSM/GPRS/3G (only with NEW SIM CARDS)
3D-accelerator **
Outcoming calls
Entering вызовы*
Entering SMS
Proceeding SMS
Bluetooth
USB
Voice search
Microphone
Sound
Chamber
Wi-Fi
Font
* doesn't accept calls
** Works not completely
(Screenshots are below)
To download
 

Attachments

  • NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).png
    NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).png
    84.2 KB · Views: 288
  • NexusHD2-Gingerbread_V2.0_NAND_device02.png
    NexusHD2-Gingerbread_V2.0_NAND_device02.png
    146.7 KB · Views: 289
  • NexusHD2-Gingerbread_V2.0_NAND_device01.png
    NexusHD2-Gingerbread_V2.0_NAND_device01.png
    163.5 KB · Views: 255

Supermen`

Member
Nov 16, 2011
39
19
Елабуга
acer-club.ru
project iDroid by supermen` (OS 2.2)
Description:
It is Android assembly in IOS style. I tried to achieve what the design and a look was similar to iPhone4/IOS. There is no only boot animation in IOS style.
That works:
GSM/GPRS/3G (only with NEW SIM CARDS)
3D-uskoritel*
Outcoming calls
Entering SMS
Proceeding SMS
Bluetooth
USB
Voice search
Microphone
Sound
Chamber **
G-Sensor
Wi-Fi
GPS
*Работает not completely
** Doesn't photograph
(Screenshots with Acer s200 below)
download
 

Attachments

  • 20100101125108.jpg
    20100101125108.jpg
    62.8 KB · Views: 231
  • 20100101125141.jpg
    20100101125141.jpg
    51.9 KB · Views: 185
  • 20100101125217.jpg
    20100101125217.jpg
    32.5 KB · Views: 161
  • 20100101125250.jpg
    20100101125250.jpg
    36.4 KB · Views: 163
  • 20100101125316.jpg
    20100101125316.jpg
    37.9 KB · Views: 152
  • 20100101125335.jpg
    20100101125335.jpg
    41.1 KB · Views: 129
  • 20100101125418.jpeg
    20100101125418.jpeg
    189.3 KB · Views: 123
  • 20100101125455.jpg
    20100101125455.jpg
    34.3 KB · Views: 123
  • 20100101125522.jpg
    20100101125522.jpg
    23 KB · Views: 104
  • 20100101125626.jpeg
    20100101125626.jpeg
    165.7 KB · Views: 103

Supermen`

Member
Nov 16, 2011
39
19
Елабуга
acer-club.ru
Android 2.3.7 Lite by supermen` (MIUI)
Description:
*Excellent design
*It is built in "Beats Audio" fashions that does a sound more best
*Last kernel
*Speed of work is high
That works:
GSM/GPRS/3G (only with NEW SIM CARDS)
3D-accelerator*
Outcoming calls
Entering SMS
Proceeding SMS
Bluetooth
USB
Voice search
Microphone
Sound
Камера**
Wi-Fi
Font
*Works not completely
**Doesn't photograph
download
 

Kubino

Senior Member
Jun 21, 2010
176
26
Supermen`: I have problem with this Android. After run haret.exe when run fsck on the SD card, it stays on "msm_hsusb_set_vbus_state:0" and doesn't boot.
 

freeweber

Senior Member
Sep 30, 2007
54
6
any way to auto boot to android

Hi supermen!!

First, thank for your hard work to build android on our old acer s200, very great job.

Is there a way to use genY dualboot in order to auto boot on android?

Thank for your reply.
 

Supermen`

Member
Nov 16, 2011
39
19
Елабуга
acer-club.ru
The instruction on installations of games on Android
And so small instruction on installations of games on Android from me:
1. We download game in the *.apk format
2. We shower this file on a memory card in any place (for convenience I personally on a memory card have a folder "Games for Android")
3. We start Android.
4. We open any conductor in Android.
5. We come into SD Card, there we find our *.apk file
6. We choose it and we press to establish
7. We play!
---------------------------------
Installation of games with a cache:
1. We make everything that is specified above.
2. Usually in a subject where you swung game specify a way where to lay down a cache.
3. Therefore ways also we throw a cache.
4. We play!
 

Supermen`

Member
Nov 16, 2011
39
19
Елабуга
acer-club.ru
MINI-FAQ
Q: Whether is completed till the end of Android for Acer s200?
A: Currently meanwhile isn't present.
Q: What is "Image"?
A: This kernel in which there are drivers.
Q: Whether work on Android proceeds?
A: Yes, work proceeds.
Q: How to install programs for Android?
A: To put the necessary program in the "AndroidApps" folder.
Q: How to establish games for Android?
A: We read here
Q: Why G-Sensor doesn't work for me in Android 2.3.X?
A: G-Sensor doesn't work on 2.3.X because, the kernel with G-Sensor was made for 2.2.X
Q: Why the chamber doesn't photograph?
A: The chamber isn't completed yet.
Q: Why in Android 2.3.X after screen shutdown, phone doesn't turn on back?
A: Initially the kernel was made for Android 2.2.X and consequently in Android 2.3.7 not everything works.
Q: Has formatted Sd Card in FAT32, at start of Android writes: "failed to mount the sd card. cannot continue", what to do?
A: We format this program: SD Formatter 2.0
 

freeweber

Senior Member
Sep 30, 2007
54
6
MINI-FAQ
Q: Whether is completed till the end of Android for Acer s200?
A: Currently meanwhile isn't present.
Q: What is "Image"?
A: This kernel in which there are drivers.
Q: Whether work on Android proceeds?
A: Yes, work proceeds.
Q: How to install programs for Android?
A: To put the necessary program in the "AndroidApps" folder.
Q: How to establish games for Android?
A: We read here
Q: Why G-Sensor doesn't work for me in Android 2.3.X?
A: G-Sensor doesn't work on 2.3.X because, the kernel with G-Sensor was made for 2.2.X
Q: Why the chamber doesn't photograph?
A: The chamber isn't completed yet.
Q: Why in Android 2.3.X after screen shutdown, phone doesn't turn on back?
A: Initially the kernel was made for Android 2.2.X and consequently in Android 2.3.7 not everything works.
Q: Has formatted Sd Card in FAT32, at start of Android writes: "failed to mount the sd card. cannot continue", what to do?
A: We format this program: SD Formatter 2.0

Hi, I'm confuse, for me with your idroid ios, the phone turn on when i previously turn off. but i've random reboot....
 

Kubino

Senior Member
Jun 21, 2010
176
26
Before start haret.exe you start clrcad.exe? And you try to start what assembly?

yes of course I start clrcad.exe before start haret.exe. I tried the version Android 2.3.7 Lite by supermen` (MIUI). About month ago I was using Android 2.2 and 2.3 (downloaded from forum on acer-club.ru) and works but then I format my microsdhc card (with SDFormatter) and try the Android 2.3.7 Lite by supermen` (MIUI) and for the first time Android start normal, then I install some applications from Android Market (Google Play) and during installation apps display turns off -> phone restart. And now still stay on "msm_hsusb_set_vbus_state:0". I can wait half hour or more but nothing change.
 

Supermen`

Member
Nov 16, 2011
39
19
Елабуга
acer-club.ru
yes of course I start clrcad.exe before start haret.exe. I tried the version Android 2.3.7 Lite by supermen` (MIUI). About month ago I was using Android 2.2 and 2.3 (downloaded from forum on acer-club.ru) and works but then I format my microsdhc card (with SDFormatter) and try the Android 2.3.7 Lite by supermen` (MIUI) and for the first time Android start normal, then I install some applications from Android Market (Google Play) and during installation apps display turns off -> phone restart. And now still stay on "msm_hsusb_set_vbus_state:0". I can wait half hour or more but nothing change.
If you start "Android 2.3.7 (Gingerbread) by supermen" or "Android 2.3.7 (MIUI) by supermen", the folder with assembly should be called as "Android_2_3". It should turn out so: sd card/Android_2_3/haret.exe and so on.
 

Kubino

Senior Member
Jun 21, 2010
176
26
If you start "Android 2.3.7 (Gingerbread) by supermen" or "Android 2.3.7 (MIUI) by supermen", the folder with assembly should be called as "Android_2_3". It should turn out so: sd card/Android_2_3/haret.exe and so on.

Yes, it is in Android_2_3. I run clrcad.exe and then haret.exe. After run haret.exe and then after run fsck on sdcard (in console) it write "msm_hsusb_set_vbus_state:0" and stay on it.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    I know English badly, but I think you me will understand. ;)
    8615Acer_Android_NEW.jpg

    Here we spread assemblies and we discuss Android OS.
    About developers:
    People who worked over development of Android: holo, estratos, tsamolotoff, LytkinAnton, Em-l.
    People who work over development of Android: wstorm.
    People who work over Android assemblies: supermen'
    Huge work on development of Android Em-l, for what to it did many thanks!

    How to start Android:
    To start to be necessary:
    1) Android OS assembly
    2) SD Card

    That it is necessary to do:
    1) Download assembly (we look for below)
    2) Format SD in FAT32
    3) Unpack assembly on a flash card, the way should look so: sdcard/android (in this folder Haret should lie)
    4) In the folder with assembly find and start Crlcad (on the screen there is nothing won't occur), and then Haret.
    5) Wait for 10-20 minutes.

    Attention! It is required an empty seat from 1,5 Gb.

    IT IS OBLIGATORY TO READ: MINI-FAQ

    P. S. The subject will develop! I will add soon: mini-faq, assemblies, and is a little more information.
    P. S. S. If you have offers how to call a subject on another, offer.
    2
    Android 2.3.7 (Gingerbread) by supermen`​
    Advantages of assembly:
    *Otlichny speed of work
    *It is built in "Beats Auidio" fashions that does a sound more best
    *There is a root
    *Beautiful design
    *All last practices
    That works:
    GSM/GPRS/3G (only with NEW SIM CARDS)
    3D-accelerator **
    Outcoming calls
    Entering вызовы*
    Entering SMS
    Proceeding SMS
    Bluetooth
    USB
    Voice search
    Microphone
    Sound
    Chamber
    Wi-Fi
    Font
    * doesn't accept calls
    ** Works not completely
    (Screenshots are below)
    To download
    2
    project iDroid by supermen` (OS 2.2)
    Description:
    It is Android assembly in IOS style. I tried to achieve what the design and a look was similar to iPhone4/IOS. There is no only boot animation in IOS style.
    That works:
    GSM/GPRS/3G (only with NEW SIM CARDS)
    3D-uskoritel*
    Outcoming calls
    Entering SMS
    Proceeding SMS
    Bluetooth
    USB
    Voice search
    Microphone
    Sound
    Chamber **
    G-Sensor
    Wi-Fi
    GPS
    *Работает not completely
    ** Doesn't photograph
    (Screenshots with Acer s200 below)
    download
    1
    Android 2.2.1 by wstorm
    Description:
    Most last assembly of Android 2.2.1 at present.
    That works:
    GSM/GPRS/3G
    3D-accelerator *
    Outcoming calls
    Entering SMS
    Proceeding SMS
    Bluetooth
    USB
    Voice search
    Microphone
    Sound
    Chamber **
    Wi-Fi
    Font
    Management of illumination
    GPS
    * Works not completely
    ** Doesn't photograph
    to download
    1
    Android 2.2.1 Light by supermen`
    Description:
    - Last kernel
    - There is root
    - Cool boot animation
    - New browser (replacement standard)
    - The new program for a file transfer through bluetooth (replacement standard)
    - Speed of work is increased
    - Power consumption is reduced
    - It is not connected to the Internet (wait for correction, meanwhile I do not know in what business)
    That works:
    GSM/GPRS/3G (only with NEW SIM CARDS)
    3D-accelerator **
    Outcoming calls
    Entering SMS
    Proceeding SMS
    Bluetooth
    USB
    Voice search
    Microphone
    Sound
    Камера*
    G-Sensor
    Wi-Fi
    GPS
    *Не photographs
    ** Works not completely
    to download