{V4.5}[KERNEL] Sympfinity Beta [SIO-V/R-BFQ3 & SAVAGEDZEN-LAGFREE-SMARTASSH3]

Search This thread

Alex Charles

Senior Member
Apr 10, 2011
281
68
Using GB CM7.2 just installed v3.5. Wiped dalvik and cache before and after install (but did take a long time for initial boot) . Now using savedzen scheduler and is quicker than before. Also wifi works with no issues

Sent from my HTC Wildfire using Tapatalk 2
 

cwk_and

Senior Member
Mar 24, 2011
164
27
pinang
Wifi disconnected after a few minutes of browsing in Google Play,with froyo ROM.
However,other apps like facebook and browser work flawlessly
 

apollopayne

Senior Member
Nov 3, 2010
292
60
shrewsbury
Testing this on Cm7.2rc and gov set to Lagfree. Everything working fine. Phone seem really snappy with using Auto Killer Memory pro app combined. I have no lag at all. Also the battery life seems better. 3 hrs on standby used 3%. On cm7 standard kernal it was 3hrs on standby used 4-5% using Smartassv2. over all really happy so far will test other govs. Big Thank you
 

kylon

Senior Member
Dec 17, 2010
2,615
2,028
Can you undervolt this kernel?
-25 or -50 should be perfect

Sent from my HTC Desire S using xda premium
 

apollopayne

Senior Member
Nov 3, 2010
292
60
shrewsbury
how do you under volt? i installed the voltage app but only saw that you can change cpu speeds min/max and the sio etc.. ill try it if someone would kindly tell me how to.
 

kylon

Senior Member
Dec 17, 2010
2,615
2,028
I think the kernel is not compatible for now
But i also think he can adds uv in the kernel(like other kernels,for ex. Virtuous9)

Sent from my HTC Desire S using xda premium
 

Sympnotic

Senior Member
Aug 23, 2010
563
280
Wifi disconnected after a few minutes of browsing in Google Play,with froyo ROM.
However,other apps like facebook and browser work flawlessly

Will try once I get back to work on this kernel, what's your froyo rom ? CM6 ?

Testing this on Cm7.2rc and gov set to Lagfree. Everything working fine. Phone seem really snappy with using Auto Killer Memory pro app combined. I have no lag at all. Also the battery life seems better. 3 hrs on standby used 3%. On cm7 standard kernal it was 3hrs on standby used 4-5% using Smartassv2. over all really happy so far will test other govs. Big Thank you

Good :) I guess SIO + SmartassV2 is really the best compromise for performance/battery (notice a lot of gov are based on/using the same logic as SmartAss)
Will stick to this setup by default ;) Thanks for your report

Can you undervolt this kernel?
-25 or -50 should be perfect

Sent from my HTC Desire S using xda premium

Nei, read below
how do you under volt? i installed the voltage app but only saw that you can change cpu speeds min/max and the sio etc.. ill try it if someone would kindly tell me how to.
Nei, read below
I think the kernel is not compatible for now
But i also think he can adds uv in the kernel(like other kernels,for ex. Virtuous9)

Sent from my HTC Desire S using xda premium
IIRC, our tiny wildfire doesn't support UV, like some graphics card, some support to enable UV software-sided, some don't.
would be great if it can be done :)

Won't happen, sorry
 

kylon

Senior Member
Dec 17, 2010
2,615
2,028
Umm ok :(
Anyway i read the deadline helps to free some memory
Do you think it can help our phone?better performance?
Thanks

Sent from my HTC Desire S using xda premium
 

cwk_and

Senior Member
Mar 24, 2011
164
27
pinang
Wifi disconnected after a few minutes of browsing in Google Play,with froyo ROM.
However,other apps like facebook and browser work flawlessly

edit:wifi works only a few seconds after kernel is installed.
After that,it disconnected,and just stuck at "scanning for wifi"
Very impressive kernel if the wifi can be fix:)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 47
    *we love wine, not whine*


    Features :
    === Based on Arco68's msm7225 kernel (every features included) ===
    - V/R & SIO & BFQ v3 scheduler
    - Governors backported from 3.0 + smartassH3 / lagfree / smoothass / SavagedZen
    - backported drivers from 2.6.36.1 / 3.0rc6 / 3.0 (Bcmdhd, Block, Bluetooth, Cfg80211/Nl80211, Cpufreq, Cpuidle, i2c, Mtd)
    - various tweaks & fixes
    - better support Miui / Aosp & CyanogenMod

    Changelog (full CL here) :

    ---v4.5---
    - smartassH3 replacing SmartassV2 (SmartAssH3 is an optimized gov for Hero at first)
    - some small tweaks
    - sorted out some mistakes
    ---v4.1---
    - small scheduler tweaks
    - compilation tweaks
    - a bit faster
    ---v4---
    - fixed msm "electron off" glitch
    - updated kgsl/msm (not really useful, fixed above)
    - more stable wifi
    ---v3.7---
    - (small) battery drain fix
    - updated cfg80211/nl80211 & defconfig
    - bcmdhd compiles but not used
    ---v3.6---
    - newer cfg80211 to prepare bcmdhd
    - small fixes
    - Bluetooth driver from 3.0 rc6 kernel (lmoyeson)
    ---v3.5---
    - working base (wifi was dead on 3.4.1)
    ---v3.4.1---
    - NOOP & smartassv2 as default
    - fix froyo & ics compat.
    ---v3.3---
    - bcm4329 module back to the state where arco left it
    - default governor is now SavagedZen (with SIO ioSched)
    - added SavagedZen / LagFree & SmoothAss governors
    - various tweaks
    ---v3.2---
    - Froyo / Gb / Ics - all in one compatibility
    - revert bcmdhd backport attempt
    - bcm4329 wifi module used
    ---v3.1---
    - uses SmartAssv2 as default governor
    - fix cpufreq defconfig issues
    ---v3.0---
    - fudge swap
    - dm-cache
    - SIO scheduler by default
    ---v2.8---
    - backported MTD driver from 2.6.36.1
    - V/R scheduler by default
    ---v2.6---
    - backported i2c driver from 3.0rc6 kernel
    ---v2.5---
    - backported Block driver from 3.0 kernel
    - tweaked deadline & SIO sched. for flash devices
    - backported CPUIDLE from 3.0rc6 kernel
    - backported CPUFREQ from 3.0rc6 kernel
    ---v2---
    - Added SIO & made it default scheduler
    - BFQio still enabled, not used
    - updated governors from 3.0 kernel
    ---v1---
    - updated BFQ (v2 to V3)
    - Genlock from 3.0 kernel (seems to be needed by ICS)
    - EarlySuspend & Wakelock update
    - SHA256 support needed by ICS
    - some minor fixes.

    Misc :
    - You can use "voltage control" (free app) to manage IO sched & governors ;)

    Try it & report bugs / happiness :)
    /!\ NOT FOR SENSE /!\

    Credits : (actually goes to all people working on our Wildfire, on Android & CM)
    -arco
    -cobje
    -erwinp
    -kali- (fix and things)
    - LorDClockaN & drowningchild (most backported stuff taken from their github, thanks)
    -those githubs I've browsed & codes I've copy/pasted.

    NO RE-UPLOAD ALLOWED / LINK TO THIS PAGE ONLY (adding this kernel to your rom can be discussed and done, just tell me)
    (github) Sources : (here) :
    6
    tried ..its smooth,battery performance is also better but wifi doesn't work.But not a problem for me,I'll test future build,keep it up. :):thumbup:
    I'll see what I can do, "no promises (tm)"
    Ive already tried it. It works smooth and its fast too.
    Wifi isnt supported, I was asking for Wifi support, without wifi,life is boring!

    Edit: 4k downloads and ~30 thanks. People are misers!
    Hehe, same comment as above, we'll see ;)

    4k downloads + some roms on it by default + lot of re-upload and still ~30 thanks ;) Note that, it's purely in my interest to continue this kernel, no fame intended :)
    4
    i think he has left willy long ago.But he has done great job for willy,this kernel and also has a great contribution in cm9. :thumbup: :)
    Hehe, not really. Buying a new phone ain't a priority ;) I'll get back on CM9 or CM10.1 soon, ErwinP did not answered me in weeks, there's some more things to compile ;)

    Can anyone continue it?
    Slym,u and many others are pros..:)

    "If I could I would, but I can't so I shan't."
    For now, I'm able to compile my kernel, wifi's working, i'll what I can get better (I have some idea ;))

    Have been using v4.1 on CM7 nightly for over a week now and the rom is amazingly fast!! Currently on the lagfree governor and 710MHz max freq....:good:

    Can anyone try the new 4.5 ? :) Should be faster, no wierd behaviors since yesterday noon for me ;)
    4
    Hey I had left you a message that kylon need somebodies help for developing his kernel. He is facing huge problems with WiFi. You are a good developer. You already created a very good kernel for wildfire for gingerbread. Kylon said he is ready if you could forward your hand of help. I send you a pm. You didn't replied. PLease reply back. I will wait.

    Sent from my HTC Wildfire using xda app-developers app

    You know, this ain't easy as just fetch my kernel, revert some patches and compiles it with linaro toolchain. Tho, I don't have the spare time / a wildfire hanging on my desk, to try and do it.
    Furthermore, sympfinity is relatively "unstable" when it comes to more modifications / reconversion (ics / jb / froyo) that it wasn't meant for.

    You can still have some of my advices on this thread, so I'll check it sometimes but apart from your 2 msg here and a PM (from you, not from kylon), it seems like all work should come from me (ie. I don't see anyone trying anything, no fork, no bug reports, no logcats or log in any way)

    So here's those first advices :
    1- check wildfire_defconfig => compare to a stable froyo kernel => work your way out
    2- check my kernel's commits history => I guess most backported stuff is fine but it could need some reverts, wifi stuff might broke while compiling for froyo
    3- i'm 67% sure (to keep it 33% fair) that nothing will be done or working : most of the roms / softwares are stable / ErwinP disapeared, so do I... There's plenty of leftover patches and commits willing to be compiled into a new ICS rom, my kernel could still be optimised, tweaked.. etc...

    You can't rely on someone, no flame, just start messing with things and be proud of what you've accomplished better than waiting on a forum for someone to answer you ;)
    2
    Working for more than 12 hours with this kernel on CM7 and what to say except it's stable and everything works smooth. (didn't test bluetooth)

    So good job and thx sharing that!

    For Lulzactive Governor v2, you may use this (https://market.android.com/details?id=com.tegrak.lulzactive) given the link of Sympnotic...

    Cheers