dual sim 802w research
- Thread starter scotty1223
- Start date
thx, i do my best, but .. no luck , i dont have signal at all
(what sim is your working one?
Another stupid question out of curiosity, is it possible to boot any ROMs through Android SDK in the laptop/desktop?
I mean, like replace the default android image with a HTC ROM and boot like a virtual device in from the SDK manager or something...
I mean, like replace the default android image with a HTC ROM and boot like a virtual device in from the SDK manager or something...
Last edited:
thx, i do my best, but .. no luck , i dont have signal at all
what sim is your working one?
Mine is SIM slot one that worked, what happened? which firmware were you using before flashing, mine just worked directly without flashing kernel separately. PLUS when I restored my original backup I decided to flash the Rom without wipe and it worked. I think you should try that.
is somene here who can help me with partitions mmcblk0p17 mmcblk0p21 mmcblk0p22 of a device 802w xx.402.x (nordic) firmware?
all partition will be more helpfull. please
all partition will be more helpfull. please
Last edited:
My HTC One Dual Sim 802w (S-ON, Locked) stopped working after a failed firmware RUU.exe.
HTC logo on a black background and triangles at the corners. The Bootloader does not go . Any Firmware, RUU is not installed correctly in the QSC file. What to do? Help
HTC logo on a black background and triangles at the corners. The Bootloader does not go . Any Firmware, RUU is not installed correctly in the QSC file. What to do? Help
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
2
I installed Android Revolution HD 62, its sense 6 Rom but you have to install the Rom using the latest TWRP recovery 2.7 for 802w. You must do wipe first before flashing the Rom. like I said second SIM and WiFi not working. :silly:2cool,thanks.
to back up your stock recovery,you will run your temp root and at a # prompt enter:
dd if=/dev/block/mmcblk0p37 of=/sdcard/mmcblk0p37
that will make a copy of your stock recovery on your sd card. youll want to copy it over to your PC where you can change the name to "stock-recovery.img" or something to that affect,and keep it safe.
let me take a quick look at the rest of the partitions,and see how they differ.2ok,so this is our best guess as to what the filled out partition table looks like,based on the locations/sizes of partitions compared to the m7 table i have:
Code:cat proc/partitions major minor #blocks name 7 0 44730 loop0 179 0 30535680 mmcblk0 179 1 128 mmcblk0p1 sbl1 179 2 256 mmcblk0p2 sbl2 179 3 130671 mmcblk0p3 pg1fs 179 4 1 mmcblk0p4 ? 179 5 16 mmcblk0p5 board_info 179 6 256 mmcblk0p6 mfg 179 7 15577 mmcblk0p7 pg2fs 179 8 256 mmcblk0p8 sbl2_update 179 9 1024 mmcblk0p9 sbl3 179 10 256 mmcblk0p10 rpm 179 11 2048 mmcblk0p11 tz 179 12 2080 mmcblk0p12 hboot 179 13 5120 mmcblk0p13 sp1 179 14 1024 mmcblk0p14 wifi 179 15 1024 mmcblk0p15 dsps 179 16 61441 mmcblk0p16 adsp 179 17 8190 mmcblk0p17 radio_config 179 18 5120 mmcblk0p18 wcnss 179 19 27647 mmcblk0p19 reserve_1 179 20 1022 mmcblk0p20 misc 179 21 4096 mmcblk0p21 modem_st1 179 22 4096 mmcblk0p22 modem_st2 179 23 20480 mmcblk0p23 devlog 179 24 4 mmcblk0p24 debug_config 179 25 256 mmcblk0p25 pdata 179 26 16 mmcblk0p26 control 179 27 1280 mmcblk0p27 local 179 28 64 mmcblk0p28 extra 179 29 1024 mmcblk0p29 cdma_record 179 30 256 mmcblk0p30 skylink 179 31 25600 mmcblk0p31 carrier 179 32 72870 mmcblk0p32 reserve 179 33 54270 mmcblk0p33 reserve_2 179 34 76800 mmcblk0p34 radio 179 35 98303 mmcblk0p35 reserve_3 179 36 16384 mmcblk0p36 boot 179 37 16383 mmcblk0p37 recovery 179 38 2424831 mmcblk0p38 system 179 39 393215 mmcblk0p39 cache 179 40 27000832 mmcblk0p40 userdata 179 64 31341568 mmcblk1 179 65 31340544 mmcblk1p1 254 0 44730 dm-0
you can back them all up,if you want to. just change the x to the number of each partition:
dd if=/dev/block/mmcblk0px of=/sdcard/mmcblk0px
aka,
dd if=/dev/block/mmcblk0p1 of=/sdcard/mmcblk0p1
dd if=/dev/block/mmcblk0p2 of=/sdcard/mmcblk0p2
and so on.
be aware that the bigger ones will take several minutes to copy,so its not hung if it seems to be taking forever. after youre done move them all to your PC and rename them according to the above table. if you need help here,let me know,but you seem to have a pretty good idea what youre doing.
you can make up your own unsinged ruu(i did this same thing before t mobile had released ruus).
in the home made ruu,youll want to include:
-an android info document(well work on that later)
-adsp
-boot
-hboot
-radio
-recovery
-rpm
-sbl1
-sbl2
-sbl3
-sp1
-system
-tz
i would like to look at mmcblk: 3,4,6,7,and 12 so if you upload those somewhere,and pm me a link(they have some personal info like esn,meid,etc so dont post a link publicly)
hopefully this will all help with the reservations you have about s off,and possibly be of use to some other folks as well. holler if you have questions2
well,obviously we didnt believe you
actually,its just as you said... a long time ago. i have several threads here and get alot of responses daily,and i dont always remember. expeically from back in november.
we also are trying to find the tampered flag,so it can work as well. plus i wanted a place to discuss with H377 how to dump his recovery and make himself up an ruu that wasnt the lock/unlock or tampered thread. maybe the title should have been something different,i didnt put much thot in to it.
hope that is a satisfactory explanation1
ok, @H377 lets start by figuring out where things are on your device.
if you could paste the results of:
adb shell
cat /proc/emmc
cat proc/partitions
