Hello friends, I created this thread for this thread and it's my preferred method.
Thanks to Shikhar A for creating the CWM recovery
Installing Clockworkmod recovery on Xolo Q900
Download the files I have linked:
1.) CWM recovery
2.) Flash tool
3.) drivers
Check its integrity
for CWM recovery
CRC32: CFB493FA
MD5 : 5C0EAB04B2C1FC4244B5B02A6508F744
SHA-1: 754032EA825A2EDCC29D72EA8DEFD49B47156458
for Flash Tool
CRC32: 171B8F50
MD5 : 11037F27575664987024F3304B01E641
SHA-1: E0A0F8E6A2215A1F387861AB9D08F2B368E4DD54
for drivers
CRC32: 3AE096AE
MD5 : C8F307484707AD5DFA8FBE2EC24F6120
SHA-1: 09696ECBC45A90E4F0F05399A2F5AF1C457C0AAB
Note: If you are in Windows 8/8.1 you need to disable driver signature check to install the driver
Now follow the procedure below carefully:
Make sure you have installed the drivers correctly.
(For Windows 8/8.1 install Windows 7 drivers)
Extract the files to their respective folders
Now open the Flash_Tool.exe
Open the scatter file from extracted folder
Make sure it looks like below. You can safely ignore the unticked ones
Click on Download
It will show you a warning, click Yes
Now the tool will wait for the phone to connect
Switch off your mobile and remove the battery
Connect the mobile without battery to PC with datacable
Now insert the battery
The flashing begins and you will see green circle saying OK
You can safely disconnect the mobile from PC
Now press VOL-UP and POWER buttons together and you should see CWM recovery.
Hit thanks if i have helped you.
Thanks for reading.
Please do contact me if you want any help and i will gladly assist you
Thanks to Shikhar A for creating the CWM recovery
Installing Clockworkmod recovery on Xolo Q900
Download the files I have linked:
1.) CWM recovery
2.) Flash tool
3.) drivers
Check its integrity
for CWM recovery
CRC32: CFB493FA
MD5 : 5C0EAB04B2C1FC4244B5B02A6508F744
SHA-1: 754032EA825A2EDCC29D72EA8DEFD49B47156458
for Flash Tool
CRC32: 171B8F50
MD5 : 11037F27575664987024F3304B01E641
SHA-1: E0A0F8E6A2215A1F387861AB9D08F2B368E4DD54
for drivers
CRC32: 3AE096AE
MD5 : C8F307484707AD5DFA8FBE2EC24F6120
SHA-1: 09696ECBC45A90E4F0F05399A2F5AF1C457C0AAB
Note: If you are in Windows 8/8.1 you need to disable driver signature check to install the driver
Now follow the procedure below carefully:
Make sure you have installed the drivers correctly.
(For Windows 8/8.1 install Windows 7 drivers)
Extract the files to their respective folders
Now open the Flash_Tool.exe
Open the scatter file from extracted folder
Make sure it looks like below. You can safely ignore the unticked ones
Click on Download
It will show you a warning, click Yes
Now the tool will wait for the phone to connect
Switch off your mobile and remove the battery
Connect the mobile without battery to PC with datacable
Now insert the battery
The flashing begins and you will see green circle saying OK
You can safely disconnect the mobile from PC
Now press VOL-UP and POWER buttons together and you should see CWM recovery.
Hit thanks if i have helped you.
Thanks for reading.
Please do contact me if you want any help and i will gladly assist you
Last edited: