[UPDATED 4/20][ROM]CyanogenMod 7.2.0-RC1 X2 [BETA]

Search This thread
By:
Advanced…
SlimMan

SlimMan

Senior Member
Aug 20, 2011
706
145
Abingdon
Ryno77 said:
I cannot get the cm7bsr to boot into bsr. When I open bsr and hit recovery it takes me to the M but won't go any further. I was on CM7 rc0 and updated to this. I tried reinstalling CM7 bsr and that did not work either. How can I fix this? Thanks.

Fixed.... Brain fart


Sent from my MB870 using XDA
Click to expand...
Click to collapse

I am having simlar problems... Only I was on stock 2.3.4 and installed this per OP ins. and when I try to boot into BSR (installed the one OP has for CM7) all it does is shutdown my phone. I tried rebooting, clearing the cache in app mgmt for the BSR and I uninstalled it and installed again and still does the same thing.

Thanks, Slim!
 
D

DawidD

Member
Sep 9, 2010
47
0
So, where in heck are the customizations for the pull down toggles? I cant seem to find them

Other than that, running melted buttery smooth. Cant wait for cm9 :)



Edit: waiiit, found em. Nevermind >_>;
 
Last edited:
Jaydizz

Jaydizz

Senior Member
Oct 11, 2011
108
13
Michigan
Flashed over RC0 without wiping data. No issues that are rom related. I still have a random reboot issue while using bluetooth heavily (very random, sometimes I can go days without a reboot, other times I get 2 almost back to back). I think this might be a hardware issue though. I plan on starting fresh by sbf'ing and see if it helps.

Other than my bluetooth issue, rc1 is definitely faster. It feels like cm7 should have came with this phone.

Sent from my Droid X2 running CM7 RC1
 
droidzika

droidzika

Senior Member
Apr 6, 2012
849
216
42.6525° N, 73.7567° W
Jaydizz said:
Flashed over RC0 without wiping data. No issues that are rom related. I still have a random reboot issue while using bluetooth heavily (very random, sometimes I can go days without a reboot, other times I get 2 almost back to back). I think this might be a hardware issue though. I plan on starting fresh by sbf'ing and see if it helps.

Other than my bluetooth issue, rc1 is definitely faster. It feels like cm7 should have came with this phone.

Sent from my Droid X2 running CM7 RC1
Click to expand...
Click to collapse

It's so hard to believe that RC1 is faster than RC0. I'm still on RC0 and loving it. :D
 
R

Rellik14

Member
Oct 27, 2009
5
0
I followed the steps all the way through as you mention. I have a couple questions though. I installed the CM7 BSR like you mention to do towards the end of all the steps. After I load the app and click install recovery do i need to reboot into recovery mode for anything? Also I went to update the SU Binary before updating any apps like you mention and my phone is sitting on "Checking installed verion ="

Also I had to re- put the cm7 bsr back onto my sd card after i loaded into cm7 (guessing it is because of the factory reset or dalvik cache wipe you had us do before we loaded into cm7. Also all of the other things were gone from my SD card as well like the GApps zip and the CM7.zip

Another thing I go back into CM System Recovery to reflash the GApps zip file like it says in the downloads area of your initial post and it says E: Can't mount SDINTERNAL: gapps-gb-20110828-signed.zip
 
Last edited:
T

tshelby73

Senior Member
Dec 18, 2011
810
137
Gillette
thelowend said:
Have you tried Nuance voice control?

Sent from my DROID X2 using Tapatalk 2
Click to expand...
Click to collapse

If your talking about the one Moon shadow found it does not say the contacts name when using Bluetooth it's just says"did you say"and then silence instead of contacts name. I guess it works fine with wired headset just not Bluetooth.

Sent from my DROID X2 using XDA
 
johnaferraro

johnaferraro

Senior Member
Oct 3, 2011
85
4
Phoenix, AZ
The dialer I'm having. Issues with. Dialer doesn't respond, the whole phone/dialer/Contact app doesn't respond and force closes very frequently. Any help please?

Sent from an EpicBlue CM7X2
 
6Flip9

6Flip9

Senior Member
Jan 22, 2012
242
33
Shelton
Slim your gonna have to redownload the bsr cm7, and make sure to uninstall the old one. I've noticed if u install the new one on top of the old the problems continue.

FROM MY MB870 W/ CM7 RC1
 
K

king..kranium

Senior Member
Jan 30, 2012
553
36
Mamou
johnaferraro said:
The dialer I'm having. Issues with. Dialer doesn't respond, the whole phone/dialer/Contact app doesn't respond and force closes very frequently. Any help please?

Sent from an EpicBlue CM7X2
Click to expand...
Click to collapse

Clear app data. are you on rc0? Or 1? If on 0 try the moon shadow mod for dialer and wifi drama.

Sent from my MB870 using Xparent Cyan Tapatalk 2
 
Last edited:
Maximinus I

Maximinus I

Senior Member
Nov 4, 2011
613
133
Pretty much any avi. Just don't use the stock movie player. I use mobo player and I haven't run into any movie I couldn't play. There's other players players but ive only used mobo.

Sent from my DROID X2 using xda premium
 
johnaferraro

johnaferraro

Senior Member
Oct 3, 2011
85
4
Phoenix, AZ
Xb0i said:
unfortunatetly it seems im having issues with rc1 i never had with rc0. calls take up to 30 secs sometimes to start dialing never happened on rc0. after unplugging from usb to pc will get a system crash and have to battery pull. after a call my phone screen wont turn on stays off like the sensor is detecting im close, have to battery pull. seemed to get more force closes than usual as well. id b able to go a week before a reset before now sometimes i have to reset couple times a day.
rc1 is a good build just needs sum stuff ironed out. im sure the more we bug test these things can get straightened.
Click to expand...
Click to collapse

Clear for the phone in manage applications. It worked for me

Sent from an EpicBlue CM7X2
 
A2Trip

A2Trip

Senior Member
Mar 2, 2012
1,584
404
Silver Lake, WI.
Pre-warning to everyone. I was getting really tired of the small icons and status bar and whatnot so I tried an LCD resolution app from the market, applied a 270-280 from a 240. Lost alot of "my apps" in the market. Went from saying I had 45 apps to 25 apps. I was having major problems with the facebook for android app thinking it may have been the latest update. I go to the market, look in "my apps" and facebook wasnt there (along with many others) but was still downloaded in my phone. I went to "all apps" and saw it. When I pressed on it, at the top it said, "device is not supported with this version." I even went back to my original 240 size LCD, erased app, data and cache. Reboot...still no facebook. I uninstalled and couldnt even find facebook in a simple search in the market. I had so much as to SBF, reroot, reflash and start all over. Don't be like me and mess with the LCD resolution. Don't know if this ROM supports that type of messing with but my phone DID NOT like it lol. Just a warning to anyone wanting to change their resolution.

Sent From My Rooted Motorola DROID X2/MB870 Running CM7.2.0-RC1
 
  • Like
Reactions: ashclepdia and iBolski
You must log in or register to reply here.

Similar threads

D
[ROM][BETA][ICS]CyanogenMod 9 "Stable" BETA1[UPDATED 8/13]
Replies
2K
Views
389K
C
ctmax45
D
[ROM][ALPHA][JB]CyanogenMod 10 Alpha 3 [UPDATED 1/13]
Replies
2K
Views
399K
sd_shadow
sd_shadow
nitroglycerine33
[ROM] Eclipse v2.3 (7/25/12)
Replies
6K
Views
820K
DQEight
DQEight
Moon Shadow - NM
  • Sticky
HowTo: Root your Motorola Droid X2 - UPDATED [14DEC2011]
Replies
229
Views
155K
sd_shadow
sd_shadow
C
Droid X2 System Recovery + Instruction
Replies
226
Views
152K
sd_shadow
sd_shadow

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 192
    D
    dragonzkiller
    dragonzkiller proudly presents:
    CyanogenMod 7.2.0-RC1 X2 BETA
    See Downloads Section​

    IC3iE.png
    815jX.png
    wZ18R.png


    d82ue.png
    cxpEU.png
    4PAPq.png


    Album Here: http://imgur.com/a/c6d3l#0

    Thanks to mastafunk for getting some of the hijack and 2nd-init issues worked out. Hashcode who has been a HUGE help getting the init binary users and telephony working. And definitely a huge thanks to MoonShadow-NM for being my guinea pig and helping me work out the kinks. Also a big thanks to ej1911 for pointing out the sdcard fix I missed!

    Features include (but not limited to):
    THE FIRST MOTOROLA DROID X2 ROM WITH ABSOLUTELY NO BLUR AT ALL! FULLY AOSP BASED
    Super fast! Like BLAZING fast!
    Full Theme Support For Every Aspect of Your Phone
    Incognito Browser Mode
    DSP Equalizer - Custom EQ settings for headset, bluetooth, and phone speaker
    Lockscreen Customizations
    Lockscreen Gestures
    Fully Customizable Pull Down Toggles (This includes a camera LED flashlight!)
    Swipe Away Notifications
    Removable sdcard is named sdcard (for compatibility)
    Internal memory sdcard is named emmc
    And MANY MANY MORE!


    How to install CM7 (Cyanogenmod) for the Motorola Droid X2.

    Please note that with all ROMs, you have the possibility of bricking your phone. Use caution and ask questions! I, dragonzkiller, am NOT responsible for what you choose to do with or to your phone!

    YOU MUST BE ON Gingerbread 2.3.4!!! This is the only version I will support! I have implemented a method to check for what version in the install, so you'll know. If you have ever upgraded to 2.3.5, you must SBF back to 2.3.4 as this check checks the kernel. This is the second BETA release, so that means most of the issues have been fixed, however there may still be problems! Please let me know what problems or issues you run into so I can address/fix them.


    Now, onto the good stuff! It MUST be done in this order!

    1. NANDROID BACKUP!
    2. SBF to 2.3.4 unless you are already there. See MoonShadow-NM's guide: HowTo: Perform a SBF ("factory restore") of your Motorola Droid X2
    3. Root your Motorola Droid X2. See MoonShadow-NM's guide: HowTo: Root your Motorola Droid X2 - UPDATED [14DEC2011]
    4. Install the Motorola Droid X2 Bootstrap Recovery (BSR). See MoonShadow-NM's guide: HowTo: Perform a bootstrap (or nandroid) backup and recovery of your Droid X2
    5. Put the Google Apps zip, the CM7 zip, and my patched BSR apk on your EXTERNAL sdcard.
    6. Boot into BootStrap Recovery. (You should know how to do this... See item number 4 above as a reference.)
    7. Install the CM7 zip.
    8. THEN the Google Apps Zip.
    10. IMPORTANT! Wipe data and cache (factory reset) and wipe dalvik cache!
    11. Boot your phone into CM7. (You will probably have to activate if you didn't after you SBF'd and setup your Google account here.)
    12. Install the patched Motorola Droid X2 Bootstrap Recovery (BSR). (This can be found in the download section of this post. Once you have CM7DX2 installed, you MUST install this BSR!)
    13. Go into the Superuser app and update the su binary.
    14. Go into the Android Market and update the apps on the phone. Keep in mind that once you update the Superuser app, you cannot update the su binary. (Looking into this, however, it might be a Superuser issue and not a CM7 issue.)
    15. Sit back and enjoy CM7 on your DX2!
    16. Never user RomManager! (Yes it's included, but that's a CM7 thing and won't work with the DX2.)
    17. NEVER DELETE ANYTHING FROM PREINSTALL! The hijack requires files in there that are installed with the BSR. I don't know why any non-dev would be messing with those files anyway.

    NOTE: If you get a hang on the M after the Google Apps Zip is flashed you didn't follow these steps. But you DON'T have to SBF! Try getting into stock recovery by having the phone off, pressing the Vol Down and Power Buttons until the "Fastboot" appears on your screen, scroll DOWN until you see the "Android Recovery" and press Vol Up. You will then see an android with an exclamation point. Press BOTH volume buttons and scroll down to "Wipe Data." Press the power button to select it and scroll down to "Yes" and select that. Then reboot and WAIT! The initial boot takes the longest. If this still doesn't work, THEN SBF and follow the directions above EXACTLY.

    Using the Patched Bootstrap Recovery With CM7DX2
    In order to get into recovery with CM7DX2 you ABSOLUTELY MUST download the patched BSR APK located in the download section of this post! There was a problem with the "hijack" name. It is conflicting with the CM7 hijack. NEVER install the original BSR while in CM7DX2! This is a guaranteed way to boot loop your phone! It might not boot loop the first couple of reboots, but it will... Eventually!


    FIXED ISSUES!
    init no longer hogs 100% of a core
    Bluetooth WORKS!
    DSP Manager WORKS!
    Torch (flashlight) WORKS!
    Google Voice WORKS!
    Dock Settings Re-Added
    Battery Fix (battery files from 2.3.3)
    Both SD Cards work
    WIFI and USB Tethering WORKS!
    WIFI sleep issue MIGHT be fixed in Beta 2
    Updating SU binary WORKS! (After update from Play Store)

    Known Issues!
    WIFI might still have some sleep issues. If this is the case, I'll look into it later.


    Currently Disabled Features (Because we don't support them)
    Reboot Recovery
    Reboot Bootloader
    HDMI - There is no native code for HDMI in CM7, so this probably won't be fixed.
    FM Radio - For now. Might be a fix later.

    This post will be updated as time goes on.

    DOWNLOADS:
    Put these on your EXTERNAL sd card.
    Patched BSR APK for ALL versions of CM7DX2
    Google Apps (Play Store, YouTube, etc.) MD5 Sum: 1647897d8ac3efb04723d2ad2c361a3f

    REFLASH THE GAPPS AFTER UPGRADING IN CASE OF FACTORY RESTORE
    Cyanogenmod 7 for the Motorola Droid X2 - BETA 2 MD5 Sum: a92b8bce58c92f6893c8c6e9881e6421

    Donations are appreciated, but not required. Buy me a sandwich or gas money to visit my family by clicking the donate link by my name. :)

    Bugs may be reported in this thread. It also would be a good idea to try to catch me in IRC at irc.freenode.net in the #cm7dx2 channel. You can also use the web IRC interface at http://webchat.freenode.net and join the #cm7dx2 channel. (Note that this is no longer #x2-aosp).

    Change Log

    update-cm-7.2.0-RC1-daytona-beta2
    updated to RC1
    included all fixes in one update

    update-cm-7.2.0-RC0-daytona-beta1 tethering patch 2
    fixed BT issues from bad init.rc

    update-cm-7.2.0-RC0-daytona-beta1 tethering patch
    added USB and WIFI tethering capabilities
    also fixed CM7 BSR (should work on stock, but untested)

    update-cm-7.2.0-RC0-daytona-beta1
    Cyanogenmod 7 beta released!
    Bluetooth is FIXED!
    DSP Manager is FIXED!
    Google Voice works!

    update-cm-7.2.0-RC0-daytona-alpha1
    Cyanogenmod 7 working on the Motorola Droid X2! - First public release
    Issues with several items:
    No bluetooth
    DSP Manager force closes when setting more than one EQ setting
    Google Voice force closes
    No HDMI
    No FM Radio
    View
    14
    D
    dragonzkiller
    reserved for updates
    View
    11
    D
    dragonzkiller
    Update to RC1 posted
    View
    10
    T
    Travisdroidx2
    mrf582 said:
    Your mistake was assuming he was 'complaining' instead of merely reporting. Tone is difficult to convey on the internet and your writing style clearly differs from his so to prevent future confusion, do not mistake a curt reply for a complaint.
    Click to expand...
    Click to collapse

    Kill this already before a moderator does! Just sit back relax and wait for beta. I know every one is all pumped up but "can't we all get along" please no more on this. Even now I am adding to the cludder. Go watch dragonzkiller twitter and wait :)[COLOR="Silver
    View
    10
    Moon Shadow - NM
    Moon Shadow - NM
    antp121 said:
    hey moonshadow, are you actually testing dragonz cm9? just wanna know how progress is going since hes been pretty quite on twitter :p
    Click to expand...
    Click to collapse

    I was testing the first pre-alpha build. That was before DZK's classes became a bear. Since then (about 2 months ago roughly), he is concentrating on his classes. As soon as things lighten up for him (read: probably summer break) he will probably pick things back up. I talked with him last night and he is still committed to CM7DX2 and CM9DX2. Something else that will help, I have a new laptop (Linux) that I can begin helping him out (as much as I can with my limited knowledge). All we are asking is patience. We both understand that everyone with a DX2 wants the rebase of CM7 and the release of CM9. With CM9 though, there are going to be some major hurdles that will have to be overcome since CM9 is a complete code re-write and the fact that CM9 is based on ICS AOSP. ICS does things much differently than Gingerbread.

    For those who are new to the DX2 community, welcome! Also, when DZK went to work on CM7, he had the Alpha build out in roughly a week and the stable RC release about 3 days after that. He is a committed DX2 developer and wants to provide a smooth, working, and as close to flawless, CM9 ROM as possible.

    For those that are chomping at the bit for CM9, think about this. Would you rather have CM9 in a pre-alpha state that DOESN'T work and just looks pretty, or would you rather have CM9 in a WORKING state? Personally, I would rather have CM9 in a working state.

    The pre-alpha that I was testing had MANY problems. During the time that he did put into it, before school became a bear, he was able to address a good number of the items on the "does not work" punch list.

    For everyone in the DX2 community, thank you for your support and understanding.

    Ciao!

    ---------- Post added at 10:45 AM ---------- Previous post was at 10:42 AM ----------
    *El_Terco86* said:
    That sucks cause I've changed Roms before and I have been able to transfer everything. But I like this rom just can't figure out why I can't see the folder for the drag racing
    Click to expand...
    Click to collapse

    Make sure it is NOT installed to run off the SDcard. It puts those files into a "file system folder". Essentially, it's a pseudo partition contained within a file. You should be able to use the CM7 Application Manager to move it from the SDcard and back to /data. Hope that helps.

    Ciao!

    ---------- Post added at 10:50 AM ---------- Previous post was at 10:45 AM ----------
    thelowend said:
    Solved my problem....but I have another question, how many people use task killers? Do you find them effective? I just deleted mine and an going to see what it is like to not use one
    Click to expand...
    Click to collapse

    Don't use task managers with CM7. There is a built in feature that allows you to purge assets to free up space. Also, task managers on Gingerbread and newer do not work. They kill the task alright, however, the Android OS will RESPAWN the task. This is a FEATURE that was build into Gingerbread to allow Android to manage the memory within the device and it works VERY well. I have a BOATLOAD of stuff running on my phone and I NEVER have less than 45MB free memory.

    To configure the built in asset manager within CM7, do this: Menu -> Settings -> CyanogenMod Settings -> Performance and check Allow purging of assets.

    Ciao!
    View

New posts