I finally got the drivers for NV flash installed. Once I run Flash stock recovery, should the phone boot properly? It will just like stock right? Mine is just stuck in S/W update still. What should I do?
I am wondering is this 2.3 which i finally got working on my as well from the kdz the one that was released today or months ago
I finally got the drivers for NV flash installed. Once I run Flash stock recovery, should the phone boot properly? It will just like stock right? Mine is just stuck in S/W update still. What should I do?
As many have stated, pushing the v21E_00.kdz via the KDZ_FW_UPD program does work. It's just touchy.
This is a step by step guide to get you back in to working shape.
Note: You MUST do this via a PC running Windows XP. Running Vista/7 in compatibility mode is not going to work, period.
Part 1: Download the files you will need below.
V21E_00.kdz
KDZ_FW_UPD_EN
One-Click-G2x-recovery-flasher-06-16.rar
LG USB Drivers G2x
Part 2:
1) Install the LG G2x USB drivers to your WinXP machine.
2) Extract the entire contents of the One-Click recovery in to a folder and keep it handy.
3) Remove the battery from the phone. Hold both volume buttons and plug in the USB cable. If you are asked for a driver, look in the APX folder where you extracted the One-Click recovery archive.
4) Run OneClickRecoveryFlasher.exe and flash the stock recovery. Wait for the process to finish and close all windows and unplug the phone.
5) Put the battery back into the phone and turn it on. You will be back at the S/W Upgrade screen. This is where you want to be! Now plug the USB cable back in to the phone. If everything is up to snuff you should have no driver problems at this point.
6) Extract KDZ_FW_UPD_EN.7z in to a folder. Inside is a msxml.msi. You need to run and install this first!
7) Run KDZ_FW_UPD.exe.. Leave the type set to CDMA and the phone mode set to DIAG. DO NOT CLICK ON "Read phone information"
8) Click the folder icon and load the V21E_00.kdz
9) Click launch software update (and pray!)
What you will see:
The log window will immediatly show:
22:41:02 : Launching SW update
22:41:02 : Unpacking KDZ
Then it will stop for a while.
After this you will most likely see:
22:41:16 : KDZ file extraced
22:41:21 : Files were extracted.
22:41:21 : LGMobileDL Load.
22:41:21 : Port = 5
22:41:21 : Connecting to phone
22:41:33 : Check Phone mode = 1
It will pause again before you see:
22:42:08 : Phone type check.......
22:42:08 : LGMobileDL.DLL Loading....
22:42:08 : _SetAuthMark Fail
22:42:08 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
22:42:08 : _SetAuthMark Fail
22:42:08 : LoadCDMAPhoneData() Error
22:42:08 : _DetachDLL Call
22:42:08 : _DetachDLL Call End
22:42:08 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\V21E.wdb
22:42:08 : Param : moduleDir =
22:42:08 : Param : waitTime = 33000
22:42:08 : Param : UsbHighSpeed = 0
22:42:08 : Param : PhoneMode = 1
22:42:08 : Param : BinVersion = V21E_00
22:42:08 : Param : AuthMark = 0
22:42:08 : Call fn_StartUpgrade
Finally after another pause you should start to get spammed by the following message:
22:42:41 : CDMA: wParam = 2007, lParam = 0
22:42:41 : Model Dll Msg Not Found(2007, 0)
You will even hear the USB disconnect/reconnect sound several times.
The sound and spam will continue until the lParam counts to 100.
It should look like:
22:46:25 : CDMA: wParam = 2005, lParam = 100
22:46:25 : Model Dll Msg Not Found(2005, 100)
22:46:25 : CDMA: wParam = 2001, lParam = 0
22:46:25 : Model Dll Msg Not Found(2001, 0)
After it gets to 100, your phone will reboot to the LG logo before going
blank. After a few moments of the blank screen you will get the TMO G2x splash before being dropped back in to your working phone.
Be patient as this takes a while. If at any point the program freezes for more than a few moments, it's most likely going to fail and you will need to try again.
Hope this helps. =)
Thanks to everyone who helped figure this out.
Edit: Added some missing info.
Do you have clockwork recovery installed?To get into the recover hold down the down volume button and power untill you see android icon and box. at that point tap the home button and you'll get boot into android recovery. but i'm stuck there. I don't know how to select the factory wipe setting
i cant even open the file after i downloaded it it ask me what do i want to open it with what should i do?
My phone keeps saying PHONE NOT FOUND!!!
[R&D Test Tools Log File]
21:43:34 : Launching SW update
21:43:34 : Unpacking KDZ
21:47:40 : KDZ file extraced
21:50:49 : Files were extracted.
21:50:49 : LGMobileDL Load.
21:51:00 : Port = 0
21:51:11 : Connecting to phone
21:51:37 : PHONE WAS NOT FOUND!
21:51:39 : ===FINISHED===
You probably need to download and install the latest LG G2X USB Drivers. THere's a link a few posts above.
The link is for older drivers. latest are 3.21 (but these are driving me nuts). Have these proved to be problems free?
yes gaww i would try that i feel your pain dude and wish u luck man hopefully everything works out really soon for u!!!
What is the exact procedure to go about restoring the phone? I'm running Windows Xp and I've been trying to get this to work for the past 5 hours, I open the KDZ app and select the downloaded kdz file and press launch software update, and sit and wait for 30 mins i keep getting
22:26:23 : CDMA: wParam = 2007, lParam = 0
22:26:23 : Model Dll Msg Not Found(2007, 0)
22:26:24 : CDMA: wParam = 2008, lParam = 2
22:26:24 : Model Dll Msg Not Found(2008, 2)
22:26:24 : CDMA: wParam = 2005, lParam = 0
22:26:24 : Model Dll Msg Not Found(2005, 0)
22:26:24 : CDMA: wParam = 2009, lParam = 1
22:26:24 : Model Dll Msg Not Found(2009, 1)
22:26:24 : CDMA: wParam = 2005, lParam = 5
22:26:24 : Model Dll Msg Not Found(2005, 5)
22:26:38 : CDMA: wParam = 2010, lParam = 3015
22:26:38 : Model Dll Msg Not Found(2010, 3015)
22:26:38 : CDMA: wParam = 2010, lParam = 3015
22:26:38 : Model Dll Msg Not Found(2010, 3015)
I'm also getting stuck at Model Dll Msg Not Found(2005, 5) for 4 times now =( Following speedsk8x's method of installing G2x drivers, One Click Recovery, msxml.msi and then KDZ_FW_UPD.exe. Does anyone else who was eventually successful encounter this particular error as well, and what was the workaround for this error?
http://xdaforums.com/showpost.php?p=15878353&postcount=112Check out post #112 of this tread and see if those steps work for you!
try sticking the kdz file in that path13:30:21 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\V21E.wdb
Cannot flash CWM as the USB device is not found. The device is plugged in and found in the LG update tool. No idea....