[KERNEL][19FEB] SiyahKernel v6.0b5

Search This thread
By:
Advanced…
aegeuss

aegeuss

Senior Member
Jan 20, 2008
734
176
Ankara
Hi Gökhan,

I am on WanamLite ICS LP9 V11.3. LED notifications for sms was working fine in b4 but it does not work in b5. As a note, I have never installed bln pro etc. Moreover, I have discovered that if I set a timeout limit to the app, it does not work in test mode, taking this change back and setting it unlimited makes the test work again.

Regards.
 
R

Rankec

Member
Apr 6, 2011
30
3
i flashed v3.2b5. everthing is working well. i like the new bln feature. very good work gm !
but i get kernel panic mode while connect my usb keyboard.
send you last_ksmg. hope you can fix it. :)
 

Attachments

  • last_kmsg.txt
    5.3 KB · Views: 12
JayJ-1974

JayJ-1974

Senior Member
Jul 31, 2010
387
47
Suffolk
kbello said:
+1 please fix

Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse

Read the change log or this...

gokhanmoral said:
it is exactly the same on samsung roms.
when you have led timeout, led's will become active when you touch the touchscreen or the touchpad.
if those leds are meant to be a guide for us to find them easily it makes sense to enable them wherever you touch.
the timeout is useful if you are watching a movie when you don't touch anything for some time.
Click to expand...
Click to collapse

~~~~~~~~~~~~~~~~~~~~~
Swyped from a distant star, the other side of the Galaxy on my Slim ICS powered GT-i9100 using Tapatalk 2©
 
bleuxeon

bleuxeon

Senior Member
Jan 25, 2012
800
282
Near COGNAC (FR)
last_kmsg...

just before I go to sleep... my FIRST

[RST_STAT = 0 x 2000000000]
KERNEL PANIC UPLOAD MODE

:confused:

Phone was idle during 12 hours just in front of me (maybe I did wake up it 3 times) and suddenly BING!

I have never ever had any single kernel panic since I m flashing my GS2.

I hope my last_kmsg could help.



EDIT 1 :
-Siyah v3.2-2 #38
-CM9 20120429

EDIT 2 : and I hope that this damn BLN thing will soon leaves Siyah thread...
 

Attachments

  • last_kmsg.rar
    2 KB · Views: 2
Last edited:
  • Like
Reactions: MistahBungle
bleuxeon

bleuxeon

Senior Member
Jan 25, 2012
800
282
Near COGNAC (FR)
αкαѕнα said:
Sounds great, but do anyone have a tip on whats the best setup or should i just use default settings... ?
Click to expand...
Click to collapse

Just after flashing Siyah you will have default seetings and they are rock solid.

Then I advise you to use ExTweaks to see what are exactly the Siyah's default seetings.

Next you can try to reboot/reboot into recovery/kernel specific options/ and here chose "battery", "performance", or "default".
 
  • Like
Reactions: αкαѕнα
P

pilgrim011

Senior Member
May 3, 2008
1,640
457
Belgrade
www.tvojsajt.com
bleuxeon said:
EDIT 2 : and I hope that this damn BLN thing will soon leaves Siyah thread...
Click to expand...
Click to collapse

Me too... When reading recent posts, I get the impression that bln is the single most useful feature in the world... Also wondering what's wrong with me - I don't understand this hype at all. Aren't there more important things, like fixing some usb host bugs/missing features, improving battery life, dual boot improvements, flashing zips to secondary ROM etc.

Gokhan, this is not a critic against you - I think you're a genius :), but I do think that high school kids are overtaking this thread with their requests for "cool" & "sexy" features. Kids, please just install missed call reminder and let Gokhan focus on some more important things. ;)
 
Last edited:
  • Like
Reactions: Hdfxsts, okmijnlp, ziTney and 8 others
tolis626

tolis626

Senior Member
Dec 31, 2009
2,518
598
Amaliada
pilgrim011 said:
Me too... When reading recent posts, I get the impression that bln is the single most useful feature in the world... Also wondering what's wrong with me - I don't understand this hype at all. Aren't there more important things, like fixing some usb host bugs/missing features, improving battery life etc.

Gokhan, this is not a critic against you - I think you're a genius :), but I do think that high school kids are overtaking this thread with their requests for "cool" & "sexy" features. Kids, please just install missed call reminder and let Gokhan focus on some more important things. ;)
Click to expand...
Click to collapse
Hey,mind your language.I'm a high-school kid(for 20 more days or so :p ) and I too got bored with reading a bazillion gazillion comments about BLN. :p
Ok,it's nice to have,but I could care less.The phone didn't come with it by default,so having it working perfectly is a luxury that has started being taken as something standard and mundane.But c'mon,when you guys buy cars,do you care more if it has fog lights or if it is fast and safe and doesn't consume fuel faster than kids consume candy?Get a grip.
Gokhan,as much as I love your work,you must understand that you can't please everyone.You may make the kernel as close to perfect as humanly possible,but someone will always complain about something.And if you fix that something,someone will complain that you broke something else.So,in my humble opinion,it's time you start respecting your own opinion and preferences more than others'.Just a friendly word of advice. :)
 
Last edited:
  • Like
Reactions: ziTney, MistahBungle, pilgrim011 and 1 other person
iekansh

iekansh

Senior Member
Oct 9, 2010
1,529
302
Is the site down? I can't download the kernel. Can someone attach the latest beta and the latest stable version here?
TIA
 
landerson07

landerson07

Senior Member
May 3, 2011
239
22
iekansh said:
Is the site down? I can't download the kernel. Can someone attach the latest beta and the latest stable version here?
TIA
Click to expand...
Click to collapse

Yeah down for me too, downloads not working!

I've tried all of the latest versions but keep coming back to 3.1rc6

Just seems a lot smoother to me? trying now with lulzactive and sio!

Sent from my GT-I9100 using Tapatalk 2
 
W

whazi

Senior Member
Oct 16, 2011
53
0
Bologna
On last 2 versions,battery profile, and latest nightly something is breaking auto brightness.. If I leave it auto its super dark.. If I set it manually to max with toggle in status bar my screen goes mad.. It starts getting brighter and brighter and image and everything seems like mosaic till its all white.. Super weird.. Same happens sometimes on cm9 booting logo.. Tryed reflash many times both Siyah and cm9 but prob persists..
Atm bk on cm9 def kernel that gives me no probs.. But Without the joy of bnl and cool extweaks settings

Any ideas? If I've a chance I'll try make a vid of it...

Edit: never had any prob on previous versions... Just b4 and b5... Also noticed lot of event 7703 kernel wakelock... On prev versions i was with no wakelock atall on kernel section of bbs

Sent from my GT-I9100 using XDA
 
Last edited:
A

akira888

Senior Member
Dec 14, 2008
385
28
Just a quick question, Guys...

Can I use the TAR version of this kernel in Odin on the un-rooted phone so that the phone will become rooted after the flash?

Or I have to flash CF-root first to gain root access then flash Siyah kernel?

I should put the TAR in PDA of Odin, shouldn't I?:confused:
 
Appumon123

Appumon123

Senior Member
Nov 3, 2011
126
13
Kochi
akira888 said:
Just a quick question, Guys...

Can I use the TAR version of this kernel in Odin on the un-rooted phone so that the phone will become rooted after the flash?

Or I have to flash CF-root first to gain root access then flash Siyah kernel?

I should put the TAR in PDA of Odin, shouldn't I?:confused:
Click to expand...
Click to collapse
I think theres an option in extweaks for auto install root.. you can select that and restart if it doesnt get rooted. i think. And ya.. tar in PDA.

---------- Post added at 08:53 AM ---------- Previous post was at 08:41 AM ----------

----------------------------------------------------------------------------------------------------------------------------------------------

@gokhanmoral or @rlorange or anyone who knows this: What is internal voltage and what are the advantages of using internal voltages for overclocking?
 
D

duykhang524

Senior Member
Nov 9, 2009
331
68
For those who can't download latest beta :D I dunno if gokhan made any reuploads but this is the version i downloaded which works fine :)
 

Attachments

  • Siyah-v3.2b5-CWM.zip
    6.4 MB · Views: 191
  • Like
Reactions: Nakbleu and serbanra
You must log in or register to reply here.

Similar threads

gokhanmoral
  • Locked
[KERNEL][ExTweaks] SiyahKernel v2.6.14 - "One kernel to rule them all"
Replies
20K
Views
5M
Crescendo Xenomorph
Crescendo Xenomorph
Chainfire
[30.10.2012][CF-Root 5.6] K**,LA*,LP-126BHJQ73SC89DEFWGKIQOTUXY,LQ-5B - su+bb+CWM4/5
Replies
7K
Views
6M
jokeromafiaa
jokeromafiaa
H
[KERNEL] SpeedMod SGS2 [K2-21 CWM5 CIFS ROOT]
Replies
7K
Views
2M
emmanueldmc
emmanueldmc
pongster
[KERNEL][14FEB'12]RedPillKernel_Rev1.3[RedPill Touch CWM Recovery by AF974]"TAKE IT!"
Replies
10K
Views
2M
D
designmansion
codeworkx
[KERNEL] ClockworkMod Recovery 6.0.2.9
Replies
498
Views
1M
J
johnsuzuki

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 1352
    gokhanmoral
    gokhanmoral
    please leave non-dev related posts here: http://xdaforums.com/showthread.php?t=1658647

    siyahkernel-ics-wide1.png

    Features:
    • based on JB sources
    • DISABLED CAP_ERASE (No superbrick bug)
    • All-in-1kernel because it supports CM9, CM10, Samsung, MIUI and Boot-to-Gecko (B2G) ROMs with a single kernel image. (no Sense4all support)
    • Dual booting support for all supported ROM types. See droidphile's post for Dual Booting FAQ
    • Custom CWM touch recovery with swipe gestures and double-tap selection
    • 6-steps CPU freq
    • 5-step GPU frequency levels. VPLL Mode to have additional frequency steps. defaults frequencies: 66-108-166-267-330.
    • Auto-root. You can also remove root via STweaks app and install it without rebooting your phone again. Auto-root can be disabled as well.
    • CPU Overclock/Undervolt support (we have two interfaces for that. both of them are defacto standard)
    • Tweakable vitalij's value (set to 5 as default)
    • Adjustable touchpad led brightness
    • Fixed fuelalert wakelocks
    • You can completely disable android logger using STweaks app
    • Faster charging for misc and USB modes. There are 3 modes (AC, Misc, USB) and normally last two of them support only slow charging. You can have charging speed of AC by increasing it (especially user while charging in car or using USB port)
    • Cpu governor optimizations
    • Gpu voltage, clock and stepcount interfaces (GPU Overclock/Undervolt)
    • Screen brightness curve settings with original panel gamma values. panel values unchanged, so you will get stock colors and will be able to use supercurio's voodoo display app when it is released. brightness modification will only change auto-brightness response.
    • BLN support both for Samsung and CM ROMs (you can use STweaks, Nstools or BLNControl app from the market to enable it)
    • Breathing or Blinking effect for BLN. (Make sure you don't enable blinking in any other BLN app) Use STweaks to select one of them.
    • Better touch sensitivity
    • Available CPU Governors: Pegasusq (default), Ondemand, Lulzactive, SmartassV2, Interactive and Conservative, Performance, Userspace, Powersave
    • CIFS as module
    • Available I/O schedulers: CFQ (default), noop, Deadline, SIO, V(R)
    • J4FS as module
    • ARM topology support (SCHED_MC)
    • Automatic EFS Backup
    • Lots of I/O tweaks and filesystem optimizations via some parts of thunderbolt scripts.
    • USB Mass Storage mode is working in CWM Touch Recovery and you can mount both internal and external sdcard as a disk drive
    • NTFS automounting for USB sticks. When you plug in an NTFS formatted USB flash it will be automatically mounted to /mnt/ntfs folder.
    • USB mouse and keyboard support
    • built-in profile support with default, battery and performance presets (you can change them in CWM Recovery). Even using everything default will save you a lot of battery juice.
    • Eargasm for headphone amplification (in STweaks) as free Voodoo Louder replacement
    • Almost everything is configurable such as scheduler features, hotplug thresholds, GPU frequencies, voltages, arm topology modes... and they are configurable via simple and free STweaks app which is embedded in the kernel and soon in Google Play & Opensource
    • Adjustable mDNIe settings
    • optional sharpness tweaks from hardcore
    • mDNIe negative effect toggle with home button (press it four times)
    • Touch gesture support by Tungstwenty. (http://xdaforums.com/showthread.php?t=1831254)
    • BLNWW (BLN Without Wakelock)
    • Slide2Wake (originally by Fluxi)

    More to come...

    ​

    Known Problems:
    • no known problems yet

    Thanks To:

    • Chainfire, Codeworkx, Arighi, Tegrak, Vitalij, Entropy512, Netarchy, koush, Creams, sk8erwitskil, hardcore, Pikachu, myfluxi, Tungstwenty
    • This part will be expanded. most of the patches I applied are coded by someone else. please remind me if I forget to give credits to anybody..

    IRC support and chat:
    Server: irc.FreeNode.net
    Channel: #siyah-kernel
    web client: http://siyah.twosx.net/ (thanks to omniwolf)
    ​
    Changelog:

    See http://www.gokhanmoral.com/ for changelog.

    You can find the sources at http://github.com/gokhanmoral/siyahkernel3
    and initramfs at http://github.com/gokhanmoral/initramfs3
    ​

    Todo:
    these are my future plans and some of them are dreams only...
    • apply chargecurrent modifications even if the cable is connected on boot
    • add optional teamwin recovery
    • make dual-boot timeout configurable
    • implement BFN (BackFlashNotification)
    • scheduling for BLN
    • organize recovery menu items
    • higher polling rate for light sensor
    • remap mouse right button to back button
    • exfat support
    • fix blnww battery drain issue (may not be possible)
    • implement dual-booting with GB+ICS ROMs
    • faster switch between first and second ROMs without needing to reboot if possible.
    ...

    ​
    View
    298
    gokhanmoral
    gokhanmoral
    troubleshooting

    siyahkernel-ics-wide1.png

    READ THESE FIRST

    • Never report any bugs to CM9/CM10 threads if you use it together with SiyahKernel
    • Do not ask questions to me directly. This is a common thread, not my personal inbox. Ask your questions in the thread and do not target them to anyone.
    • Do not expect answers to all your questions. There are some questions which nobody knows the answer of.
    • Do not forget that this is a development thread. There is another thread in general section for those who wants to discuss battery life and chats. If your post does not include a feature request, bug report or suggestion it should be posted to the other thread.
    • No ETA for new version. Even if I sometimes talk about release dates those may change and they change for some good reason or because of my real-life obligations.
    • Make use of "Search this Thread -> Advanced Search"
    • Never ever discuss anything deep-sleep related in this thread. I do not make modifications to prevent sleep and 99% of deep sleep problems are application/ROM related. discuss it in general section. I do not want any positive ("this kernel sleeps like a baby") or negative ("There is a big problem with deep sleep. Please fix it") messages in my development thread.
    • If you do not provide details about your configuration and settings nobody can help you or nobody will care about your problem/bug report. The problems without details (ROM, settings, preferably the version that the problem first happened or the one that you don't experience the problem) will be ignored.
    • Never ever report any SOD issues if you are undervolting/overclocking and make sure you attach last_kmsg log. If you don't know what it is report the problem to the other thread because one more post without any useful information on dev thread will help noone including yourself.


    FAQ:

    Q: I am having some random lockups with some apps
    A: try removing root by using STweaks app and restart.

    Q: What is the difference between STweaks and ExTweaks?
    A: Both have similar functionality. ExTweak is Xan's implementation of the UCI interface (which is designed by Xan and me with the helps of AndreiLux and implemented in the kernel as open scripts by me) and STweaks is mine. I was hoping Xan would release the sources of ExTweaks (without profile support) but he changed his mind and I decided to open STweaks. Soon they will have almost identical functionality, so you can use whichever you like.

    Q: Does this kernel work on XXXXXX-ROM?
    A: If the ROM is based on Samsung Stock ICS Rom LPQ or newer, it should. Otherwise, search the thread... If you cannot find any reference to that ROM, try the kernel. You won't lose anything by trying this kernel. Worst case scenario is to reflash your previous kernel or ROM. You can backup your previous kernel with Hellcat's k-tool from the market.

    Q: Where is CM9, MIUI or Samsung ROM versions?
    A: There is only one version. Both ROMs are supported with a single kernel image.

    Q: What is the best settings?
    A: It is the one you try yourself and like.

    Q: I have just lost 20-30% battery by just rebooting/flashing the kernel. Is it a bug?
    A: No. It happens because of our fuel gauge chip which doesn't require calibration goes crazy sometimes. It is not related with kernel or ROM. Just reset fuel gauge chip using STweaks app (or remove the battery and wait 3 minutes) and then charge your phone.

    Q: BLN doesn't work.
    A: you need to enable it in stweaks or BLN app. if you have more than one app to configure bln make sure all of them use the same settings.

    Q: BLN works in test mode but it doesn't work otherwise.
    A: if test mode works you should blame the apps. Stock messaging and email apps may not support BLN and in some other applications you may need to enable notifications. Either find another application or change your ROM.

    Q: Can I use breathing effect without using BLN?
    A: for now, breathing effect only works in BLN. There is no way of using it otherwise.

    Q: I need to disable and re-enable BLN in stweaks to get it working again. What is the problem?
    A: You may have another BLN related application (BLNapp, nstools, or a script) which disables BLN after stweaks apply the setting at early boot stage. you have to either uninstall that app or enable BLN in that app as well.

    ​
    View
    204
    gokhanmoral
    gokhanmoral
    siyahkernel-ics-wide1.png
    View
    150
    gokhanmoral
    gokhanmoral
    closing the thread once again...

    I don't want to piss the mods again because this thread attracts too many people.
    most of them misinterpret the "this is a development thread" statement and use the thread for their self-development purposes.

    There are very few people who give useful feedback and suggestions and I talk to them over gtalk, email or PMs anyway.

    greetings :)
    View
    146
    gokhanmoral
    gokhanmoral
    siyahkernel-ics-wide1.png
    View

New posts