Without using BT, I've had 2 hot reboots within 24 hours (flashed 0222 yesterday). Note that I am NOT complaining or whatever, but simply bringing the point forward. I know other devices running RootBox had some hot reboot issues, but since Bajee did not announce any fixes, I'm just going to wait patiently. FWIW, after the hot reboot occurs, if I check a Task Manager, I see that '/system/bin/gsiff_daemon' is spiking the CPU.
Also, further to the point that I am not trying to ***** and whine (I want to help ensure this ROM is 'hot-boot-free'), here's an excerpt from the last_kmsg that occurred when the hot reboot happened:
You'll notice that at the beginning, "<6>[14358.784667] c0 REBOOT Notifier for CPUFREQ //// <6>[14358.784714] c0 REBOOT Notifier for BUSFREQ" is shown, as I was OC'ing to 1920mhz, but I've lowered it since. What's also a bit strange is that when set to 1920mhz, SetCPU reports that the device runs at 1900mhz. I know it's a new kernel, so again, just wanted to report my findings.
To end, THANK YOU JOHN AND BAJEE!!! I know I've brought up some issues, but I always do my best to provide whatever info I can rather than just blindly complain. I know this thread is aimed towards Development of RootBox, and I'm hoping that I am able to help provide decent debugging info at the least
Also, further to the point that I am not trying to ***** and whine (I want to help ensure this ROM is 'hot-boot-free'), here's an excerpt from the last_kmsg that occurred when the hot reboot happened:
Code:
<6>[14358.755607] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.773139] c3 lcd panel: s6evr02_check_fb, fb2
<0>[14358.784372] c0 (sec_debug_set_upload_magic) 0
<6>[14358.784607] c0 graphics fb0: lcdfreq_reboot_notify
<6>[14358.784667] c0 REBOOT Notifier for CPUFREQ
<6>[14358.784714] c0 REBOOT Notifier for BUSFREQ
<6>[14358.784911] c0 s5p-ohci s5p-ohci: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14358.784978] c0 s5p-ohci s5p-ohci: shutdown -
<6>[14358.785022] c0 s5p-ehci s5p-ehci: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14358.785568] c0 s5p-ehci s5p-ehci: shutdown -
<6>[14358.785636] c0 dummy 2-0057: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14358.785670] c0 dummy 2-0057: shutdown -
<6>[14358.786039] c0 ssp 1-0018: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14358.786074] c0 [SSP]: ssp_shutdown
<6>[14358.786105] c0 wake disabled for irq 352
<6>[14358.790093] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.807010] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.824223] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.842105] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.858852] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.875878] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.892955] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.910521] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.927461] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.944670] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.961933] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.979119] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.995946] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.013075] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.030465] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.047969] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.049466] c1 ssp_senosrhub_thread_func: kthread_stop()
<6>[14359.049510] c1 ssp_senosrhub_thread_func: exit
<6>[14359.064839] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.081822] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.099117] c3 lcd panel: s6evr02_check_fb, fb2
<3>[14359.101232] c0 [SSP]: toggle_mcu_reset - ssp_Normal Mode
<6>[14359.101258] c0 ssp 1-0018: shutdown -
<6>[14359.101286] c0 pn65n 12-002b: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101313] c0 pn65n 12-002b: shutdown -
<6>[14359.101333] c0 s5p_ddc 5-003a: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101362] c0 s5p_ddc 5-003a: shutdown -
<6>[14359.101383] c0 sii9234_cbus 15-0064: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101412] c0 sii9234_cbus 15-0064: shutdown -
<6>[14359.101433] c0 sii9234_hdmi_rx 15-0049: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101462] c0 sii9234_hdmi_rx 15-0049: shutdown -
<6>[14359.101484] c0 sii9234_tpi 15-003d: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101511] c0 sii9234_tpi 15-003d: shutdown -
<6>[14359.101532] c0 sii9234_mhl_tx 15-0039: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101562] c0 sii9234_mhl_tx 15-0039: shutdown -
<6>[14359.101662] c0 i2c 5-0009: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101688] c0 i2c 5-0009: shutdown -
<6>[14359.101707] c0 i2c i2c-5: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101731] c0 i2c i2c-5: shutdown -
<6>[14359.101753] c0 max77686-rtc max77686-rtc: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.101786] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_wtsr: disable WTSR
<6>[14359.116351] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.133381] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.150591] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.168446] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.174468] c0 max77686_rtc_shutdown: WTSR_SMPL reg(0x80)
<6>[14359.174493] c0 max77686_rtc_shutdown: success to disable WTSR
<6>[14359.174520] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_smpl: disable SMPL
<6>[14359.185152] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.202169] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.219367] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.224208] c0 max77686-rtc max77686-rtc: shutdown -
<6>[14359.224260] c0 dummy 7-0006: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224285] c0 dummy 7-0006: shutdown -
<6>[14359.224304] c0 max77686 7-0009: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224330] c0 max77686 7-0009: shutdown -
<6>[14359.224350] c0 i2c i2c-7: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224374] c0 i2c i2c-7: shutdown -
<6>[14359.224391] c0 wm8994 4-001a: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224417] c0 wm8994 4-001a: shutdown -
<6>[14359.224435] c0 i2c i2c-4: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224459] c0 i2c i2c-4: shutdown -
<6>[14359.224477] c0 melfas-ts 3-0048: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224503] c0 melfas-ts 3-0048: shutdown -
<6>[14359.224523] c0 i2c i2c-3: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224547] c0 i2c i2c-3: shutdown -
<6>[14359.224565] c0 wacom_g5sp_i2c 2-0056: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224592] c0 wacom_g5sp_i2c 2-0056: shutdown -
<6>[14359.224612] c0 i2c i2c-2: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224636] c0 i2c i2c-2: shutdown -
<6>[14359.224653] c0 i2c i2c-1: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224677] c0 i2c i2c-1: shutdown -
<6>[14359.224695] c0 i2c i2c-0: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224718] c0 i2c i2c-0: shutdown -
<6>[14359.224736] c0 i2c i2c-12: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224760] c0 i2c i2c-12: shutdown -
<6>[14359.224779] c0 ice4 22-006c: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224803] c0 ice4 22-006c: shutdown -
<6>[14359.224823] c0 i2c i2c-22: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224848] c0 i2c i2c-22: shutdown -
<6>[14359.224866] c0 an30259a 21-0030: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224892] c0 an30259a 21-0030: shutdown -
<6>[14359.224911] c0 i2c i2c-21: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224936] c0 i2c i2c-21: shutdown -
<6>[14359.224961] c0 max77693-muic max77693-muic: shutdown +: max77693_muic_shutdown+0x0/0x98
<6>[14359.224992] c0 max77693-muic max77693-muic: func:max77693_muic_shutdown
<6>[14359.225018] c0 max77693-muic max77693-muic: max77693_muic_shutdown: JIGSet: auto detection
<6>[14359.225900] c0 max77693-muic max77693-muic: shutdown -
<6>[14359.225931] c0 max77693-led max77693-led: shutdown +: max77693_led_shutdown+0x0/0x2c
<6>[14359.226913] c0 max77693-led max77693-led: shutdown -
<6>[14359.226959] c0 dummy 17-0048: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.226991] c0 dummy 17-0048: shutdown -
<6>[14359.227015] c0 dummy 17-0025: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227045] c0 dummy 17-0025: shutdown -
<6>[14359.227069] c0 max77693 17-0066: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227100] c0 max77693 17-0066: shutdown -
<6>[14359.227125] c0 i2c i2c-17: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227154] c0 i2c i2c-17: shutdown -
<6>[14359.227177] c0 i2c i2c-15: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227207] c0 i2c i2c-15: shutdown -
<6>[14359.227230] c0 max17047-fuelgauge 14-0036: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227265] c0 max17047-fuelgauge 14-0036: shutdown -
<6>[14359.227294] c0 i2c i2c-14: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227324] c0 i2c i2c-14: shutdown -
<6>[14359.227346] c0 sec_touchkey_driver 8-0020: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227381] c0 sec_touchkey_driver 8-0020: shutdown -
<6>[14359.227409] c0 i2c i2c-8: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227438] c0 i2c i2c-8: shutdown -
<6>[14359.227529] c0 s3c-sdhci s3c-sdhci.3: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.227573] c0 s3c-sdhci s3c-sdhci.3: shutdown -
<6>[14359.227602] c0 s3c-sdhci s3c-sdhci.2: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.228261] c0 sdhci_shutdown_host : MMC Card OFF
<6>[14359.228285] c0 s3c-sdhci s3c-sdhci.2: shutdown -
<6>[14359.228334] c0 s3c2410-wdt s3c2410-wdt: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.228370] c0 s3c2410-wdt s3c2410-wdt: shutdown -
<6>[14359.228404] c0 mdnie mdnie: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.228434] c0 mdnie mdnie: shutdown -
<4>[14359.228527] c0 Disabling non-boot CPUs ...
<5>[14359.236477] c0 CPU1: shutdown
<6>[14359.236641] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.254283] c3 lcd panel: s6evr02_check_fb, fb2
<5>[14359.255124] c0 CPU2: shutdown
<5>[14359.264575] c0 CPU3: shutdown
<0>[14359.269453] c0 Restarting system with command ''.
<0>[14359.269477] c0 pid = 626 name:Thread-154
<0>[14359.269515] c0 sec_reboot (104, )
PMIC rev = PASS2(4)
mmc_initialize: mmc->capacity = 30777344
Samsung S-Boot 4.0-262790 for SGH-I317M_NA_BMC (Oct 3 2012 - 09:55:09)
EXYNOS4412(EVT 2.0) / 2047MB / 15028MB / Rev 10 / I317MVLALJ2
initialize_ddi_data: usable! (4:0xe)
PARAM ENV VERSION: v1.0..
<start_checksum:331>CHECKSUM_HEADER_SECTOR :4096
<start_checksum:333>offset:50, size:6296
<start_checksum:336>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:20
Not Need Movinand Checksum
Movinand Checksum Confirmation Pass
init_fuelgauge: fuelgauge power ok
init_fuelgauge: not POR status
init_fuelgauge: is reset case, skip soc-cal.
get_table_soc: vcell(4043) is caculated to t-soc(79.141)
init_fuelgauge: start: vcell(4043), vfocv(4126), soc(83), table soc(79)
init_fuelgauge: finish: vcell(4043), vfocv(4126), soc(83), table soc(79)
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL2:0x3b
init_microusb_ic: MUIC: CONTROL2:0x3b
PMIC_ID = 0x02
PMIC_IRQSRC = 0x00
PMIC_STATUS1 = 0x12
PMIC_STATUS2 = 0x00
PMIC_PWRON = 0x09
PMIC_IRQ1 = 0x03
PMIC_IRQ2 = 0x00
s5p_check_keypad: 0x0
s5p_check_reboot_mode: INFORM3 = 12345670 ... skip
board_check_cp_mdm9x_type : 0
s5p_check_upload: MAGIC(0x0), RST_STAT(0x20000000)
s5p_check_download: 0
microusb_get_attached_device: STATUS1:0x3f, 2:0x00
check_pm_status: normal reset, do not enter LPM mode.
ddi type = 1, S.LSI
cmu_div:6, div:2, src_clk:880000000, pixel_clk:62614944
41, 16, a2,
load_kernel: loading boot image from 106496..
- read_bl1
Verify_Binary_Signature: failed.
pit_check_signature (BOOT) invalid.
Set invalid sign flag
if_ddi_data: succeeded. (4:0xe)
ATAG_CORE: 5 54410001 0 0 0
ATAG_MEM: 4 54410002 20000000 40000000
ATAG_MEM: 4 54410002 20000000 60000000
ATAG_MEM: 4 54410002 20000000 80000000
ATAG_MEM: 4 54410002 1ff00000 a0000000
ATAG_SERIAL: 4 54410006 42f76001 f7c79f0f
ATAG_INITRD2: 4 54420005 42000000 4450a
ATAG_REVISION: 3 54410007 a
ATAG_CMDLINE: 6f 54410009 'console=ram loglevel=4 androidboot.baseband=mdm sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=1 consoleblank=0 lpcharge=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=65 cordon=9770d737b3f8fb7668fba130b673814b androidboot.emmc_checksum=3 androidboot.bootloader=I317MVLALJ2 androidboot.serialno=42f76001f7c79f0f snd_soc_core.pmdown_time=1000'
ATAG_NONE: 0 0
Starting kernel at 0x40008000...
SWITCH_SEL(1)
You'll notice that at the beginning, "<6>[14358.784667] c0 REBOOT Notifier for CPUFREQ //// <6>[14358.784714] c0 REBOOT Notifier for BUSFREQ" is shown, as I was OC'ing to 1920mhz, but I've lowered it since. What's also a bit strange is that when set to 1920mhz, SetCPU reports that the device runs at 1900mhz. I know it's a new kernel, so again, just wanted to report my findings.
To end, THANK YOU JOHN AND BAJEE!!! I know I've brought up some issues, but I always do my best to provide whatever info I can rather than just blindly complain. I know this thread is aimed towards Development of RootBox, and I'm hoping that I am able to help provide decent debugging info at the least