Hi, I have been hunting around and cant seem to resolve this problem.
Yesterday my phone locked up (blank screen) and so I hard reset it.
I was not doing anything with it at them time (in my pocket).
It would then only boot into the bootloader, no recovery.
I have been running CM nightlies with no problem up until now.
I have been running custom roms for a number of years, but would still say that I have limited knowledge.
Outline of Issue
I have gone through a number of guides and used a few different tools but to no avail. (best of all im on the other side of the world from home so cant even use my old phone)
This is what Getvar returns
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.980.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: removed
(bootloader) imei: removed
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: OPTUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3845mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d8b0f7651bb88c960f701ae91477674a
getvar:all FAILED (unknown status code)
finished. total time: 0.044s
note the failed line at the bottom.
I have also checked drivers, uninstalled them and reinstalled the naked drivers.
Any advice would be appreciated.
Yesterday my phone locked up (blank screen) and so I hard reset it.
I was not doing anything with it at them time (in my pocket).
It would then only boot into the bootloader, no recovery.
I have been running CM nightlies with no problem up until now.
I have been running custom roms for a number of years, but would still say that I have limited knowledge.
Outline of Issue
- ADB returns an error for every command
- Fastboot will see the device, and provide a getvar but returns an error when i try to push a recovery image
- I think i have been able to get into RUU (reboots and screen goes black) as i can still get basic fastboot command returns.
- No other commands seem to work.
I have gone through a number of guides and used a few different tools but to no avail. (best of all im on the other side of the world from home so cant even use my old phone)
This is what Getvar returns
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.980.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: removed
(bootloader) imei: removed
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: OPTUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3845mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d8b0f7651bb88c960f701ae91477674a
getvar:all FAILED (unknown status code)
finished. total time: 0.044s
note the failed line at the bottom.
I have also checked drivers, uninstalled them and reinstalled the naked drivers.
Any advice would be appreciated.
Last edited: