Will... if it´s easy just go for it... 1.8 Ghz is a bit unstable but 1.7 Ghz is nice
@mrberni is it the flickering as you described or the brightness change? Does it also occur when you don't have autobrightness on?
Yes it seems to be brightness flickering. Auto brightness is off.
Sent from my HTC One X using xda premium
Just noticed the exact same thing on v14.
Sent from my HTC One X using xda app-developers app
me too, since upgrading to jb i have noticed this flickering on all kernels, I read somewhere this is a powersaving feature(on some other sam device).
sorry for me nood question, but what is UV? and how to change this it?me too, since upgrading to jb i have noticed this flickering on all kernels, I read somewhere this is a powersaving feature(on some other sam device).
I also noticed this flickering stops(or becomes unnoticable) on higher brightness-es
sorry for me nood question, but what is UV? and how to change this it?
Under volting, is done to reduce power consumption (really hard to see on this soc) and heat (best reason)
Neo recommends the app system tuner
Sent from my HTC One X using Tapatalk 2
And what are the best values to set it up?
Sent from my HTC One X using Tapatalk 2
what about that patch for spirit fm... does it breake audio in calls or in mx plauer? irbpereira reported that but hes rhe only one so far. anyone on v14 can confirm?
Sent from my HTC One X using Tapatalk 2
Depends on your individual SoC.
You should try and test which values work best for you.
And which ones are the best for performance and power saving?
Sent from my HTC One X using Tapatalk 2
Hey Neocortex!
Please check these fixes Thoemy and me had recently done on the cyanogenmod kernel tree:
Thoemy's Lag fix for Capactivie button leds: https://github.com/CyanogenMod/andr...mmit/280981e44da1745fedf008e139fd28bbf718b973
UMS read-only mode fixed to Read-Write (Usb mass storage works correctly now): https://github.com/CyanogenMod/andr...mmit/d12c401fe392f199122aa5702e55f23a7519b4d8
what would oneX be without u guys many many thanks ! I give the links to LorD, hes responsible for ROM stuff
[B]ncx-314_v1[/B]
-initial release
[B]ncx_314_v3[/B]
-attempt to fix sound and bluetooth
[B]ncx_314_v4[/B]
- fixed audio
[B]ncx_314_v5[/B]
-fixed hotplugging (all governors should work now, all CPUS came online @ bench)
-added VOLUME WAKE (be sure to enable it in ROM too)
-fixed multitouch
[B]ncx_314_v6[/B]
-fixed cpu governor change issue
-all cpus use now the same governoDONT FLASH ON SENSEr
-added USB fastcharge
[B]ncx_314_v7[/B]
-added Voltage control
-GPU now @ 520 MHZ (please test), Also 484MHz and stock is added in code so i can compile in no time (plan to provide 3 versions)
-some compiler cleanups (only important for me, user aren´t affected from this)
[B]ncx_314_v8[/B]
- fixed GPU scaling, sorry guys now it scales up to 520 :) just tested
[B]ncx_314_v9[/B]
- raised gpu low freq to 250MHz
- enjoy a new level of UI smoothness :)
[B]ncx_314_v11_b[/B]
- added bfq I/O sched
- set bfq to default sched
- added cfq I/O sched
- added deadline I/O sched
- tweaked deadline
[B]ncx_314_v13[/B]
- fixed setting ondemand and bfq on boot
- patchset to fix light sensor issues on AOSP (thx Thömy)
- integrated s2w -> finally :p
[B]ncx_314_v13_c[/B]
- fixed starting apps and not booting issue
[B]ncx_314_v14[/B]
- enabled KSM
- AUDIO FM FIX from tbladen
- tweaked deadline more
- tweaked lowmemory killer
[B]ncx_314_v15[/B]
- fix button backlight lag (thx tbalden)
- UMS read-only mode fixed to Read-Write (Usb mass storage works correctly now, also here -> thx tbalden
[B]ncx_314_v16[/B]
- disabled interactive on early suspend (solves the issue that 2 different govs are used on resume)
- added n3ocold governor (peqasusq port)
[B]ncx_314_v16c[/B]
-solved reboot issue when switching to n30c0ld governor (thx max for teaching :) ) -> Attention: its still buggy, it stays on the freq thats online when switching (no up down scaling) [B]DONT SWITCH TO IT, ITS ONLY FOR ME AND MAX FOR DEBUGGING
-added smartmax governor from maxwen :)[/B]
[B]ncx_314_v16d[/B]
- fix to get cpu out of g mode in LP mode (thx for pm max)
- sound cleanups
[B]ncx_314_v17b[/B]
- replaced nv hotplugging with mpdecision (thx, showp-1984, maxwen)
- Disable OS check for the mass storage gadget, thx at thömy :)
[B]ncx_314_v18[/B]
- MERGE a pull request by LorD ClockaN:
- tegra_pcm -> supports audio up to 32 bit
- Spirit FM fix (untested)
- added smartdimmer (Tripnraver)
- updated graphics driver (Tripnraver)
- set core to 0,95V on LP1 (Tripnraver)
- added a GPU OC Interface (you are now able to choose ur GPU speed on your own)
- standard GPU clock is still 520 MHz (info how to change will be available in 3rd Post of this Thread)
[B]ncx_314_v20c_AOSP AND SENSE[/B]
-added SIO IO sched
-added ROW IO sched and set default (great perfromance)
-updated maxwens smartmax-gov to latest version
-UV´ed core_vdd (GPU,EMC,AVP, LP) -50mV by default as I did in old base
[B]ncx_314_v21_AOSP AND SENSE[/B]
- Added and enabled JRCU
- latest interactive governor from XMISTER (3.4 baseline + optimizations from XMISTER -> great Job, awesome dude :) )
- set smartmax a bit more aggressive (but still the best for battery)
- no more replug of fastcharge needed (thx maxwen)
- battery life should improove with this version while containing power also
- SENSE Ramdisk from latest RENOVATE ROM, AOSP RAMDISK from latest CM10.1 (every AOSP build use this atm)
[B]ncx_314_v21b_AOSP AND SENSE[/B]
- hopefully freezes and bootloops are gone
[B]ncx_314_v22_AOSP AND SENSE[/B]
- added CPU HARDCAP (seting freq with every app works now), thx to maxwen, xmister, nik3r, kozmikkick, showp-1948, faux, TripnRaver
- added ZRAM
- removed buggy governors perfromance and powersave
- switch from KSM to UKSM
- slow button backlight notification patch from tbalden and thoemy out of gerrit :)
[B]ncx_314_v23_AOSP AND SENSE[/B]
-set bootup freq to 1300 MHZ (best for smoothness and power)
-switched to CPUQUIET hotplugging
-enabled SWAP and ZRAM (double checked both now)
- be sure to run this script for working SWAP and ZRAM (thx again Kozmikkick): [url]http://d-h.st/tIH[/url] place it in etc/init.d folder or run it manually
[B]ncx_314_v24b_AOSP AND SENSE[/B]
-updated wifi drivers to 03.SP3 (thx TI :p, and kozmickkick for finding out )
-added touchdemand governor
-added intellidemand governor
-gave a bit more responsivness to intellidemand
-added sysfs interface for changin min audio freq while screen on (for the stutter guys) (thx maxwen)
-cpuquiet: added LP hysteresis and logging (thx maxwen)
-cpuquiet: LP hysteresis update (thx maxwen)
- fixed missing I/O Scheds
[B]ncx_314_v25c_AOSP[/B]
- added batterymax governor (smartmax governor with xtreme battery settings)
- dont excpect huge perfromance from batterymax its only for battery
- patched to 3.18 source (still need feedback about WIFI on sense)
special thanks here to maxwen... OneX wouldnt be that way without this guy !
[B]ncx_314_v26_AOSP and SENSE[/B]
- updated video drivers from Tegra Reference (thx for commits xmister and maxwen), should fix video on SENSE
- entropy tweaks :D
- some stability fixes
- try to fix the very rare spinlock bug
[B]n3okernel_v29_AOSP and SENSE[/B]
- audio bt freq boost to 204 MHz
- audio 2 bt sysfs interface (ported from maxwen bcm chip)
- more responsivenes for batterymax
- reduced Qos freq from 910 to 500
- reduced balance level from 60 to 55 (needs testing)
- more aggressive tresholds for EMC (MEM controller) and AVP (Audio Video Processor)
- added early suspend driver to ondemand governor (original implementation by showp-1984)
- fixed min audio sysfs interface for SENSE users
- revert to older wifi drivers for SENSE users (AOSP still has newer :p)
- removed pegasusq governor until debugged
- add and use gmode force (cpuquiet)
- balance play arounds as Tun reported audio lags to me
- renamed kernel to n3okernel instead of ncx_314
- page writback: patch disables the writeback function on screen is on, back when the screen is off to flush all the dirty pages.
- added sysfs interface to choose max LP core freq
- bunch of cleanups, cleanups and even more cleanups
[B]n3okernel_v31d_AOSP and SENSE[/B]
- set readahead to 128kb (better performance)
- button backlight sysfs interface from XMISTER (thx man)
- smartmax updates
- touchdemand updates
- builded with linaro toolchain and its optimizations
- performance and smoothness updates (thx xmister for the reworked dvfs tables, they work better on lower freqs we feel)
- BLN fix
[B]n3okernel_v33_AOSP and SENSE[/B]
- backlight: enable hidden sysfs for color enhance
- Set BLN max value to obey button brightness value
- led: limit BLN brightness to button brightness
- leds:add custom option if slow blink brightness should be limited to button brightness - default is true
- making touchpoke working :) thx maxwen
- smartmax updates
[B]n3okernel_v34_AOSP and SENSE[/B]
- updated smartmax to latest version and all its features :) thx maxwen
- Sense has new Wifi drivers now (report back, if its not working again i revert)
- updates to staging / android
[B]n3okernel_v35_AOSP and SENSE[/B]
- updated bfq sched to v6
- new hashtable from maxwen
- SENSE: BLN should be fixed now, please report back
[B]n3okernel_v36_AOSP and SENSE[/B]
-reverted some spinlock stuff
-proper fastcharge fix (maxwen)
[B]n3okernel_v37_AOSP and SENSE[/B]
- fastcharge fixed (thx maxwen)
- SENSE: reverted multitouch fix, so no more incoming call freeze
[B]n3okernel_v37_SENSE_CALIBRATION_FIX[/B]
-use xmisters synaptics_3200.c with sysfs control from maxwen, thanks buddys :)
[B]ncx_314_v38_AOSP AND SENSE[/B]
- added Double TAP to wake (double tap screen anywhere 2 times to wake device, works only on screen off... lol)
- unfortunatley AOSP only . I hope i get it working on SENSE the next days
[B]ncx_314_v39_AOSP AND SENSE[/B]
-fixup s2w
-revert JRCU (shoud fix deadlocks)
[B]maxwen [/B]for changing governor solution, sound fix, s2w port, fast charge and great support (awesome buddy)
[B]nik3r [/B]for s2w port
[B]tripnraver [/B]for volume fix
[B]faux123 [/B]for voltage control
[B]Xmister [/B]for pointing me in right direction for hotplug solution, s2w commit
[B]whole ICJ Team[/B] which support me where they can, you guys rock
[B]pabx [/B]from AOSP ROM, [B]tbalden [/B]from CM10.1 ROM (great guys, help where they can)
[B]showp-1984[/B] for great support, s2w and getting me started on Github
[B]franciscofranco [/B]for GPU OC interface of old base
[B]TUN_SD[/B] for providing our awesome Server
[B]Everyone [/B]whos helping in an other way (contributors, Thread residents)