[KERNEL] KGPNeok Nexroid UltimateS v3.9[38.8][2012-01-08]|Extreme Smooth & Stable

kgp700 · Dec 10, 2011

Neok UltimateS Kernel v3.9Ti
2.6.38.8, 128-1190, CFS, NOOP/CFQ/BFQv2/SIO/VR, SWAP, SLAB, HAVS, AXI, HW3D kernel included (base on Tiamat 4.0.6)

my Kernel changeset (compare Tiamat4.0.6)

- Amazing Smooth working
- Add SIO IO Scheduler
- Add VR IO Scheduler
- Change kernel optimization flags
- Compiled by 2011.10 Linaro GCC4.5.4 with -O2 and other optimization flags
- CFS Tweak (SCHED_FEAT(GENTLE_FAIR_SLEEPERS, 0))
- Applied Preempt TinyRCU & RCU Booster
- Applied RCU Optimization
- Applied RCU FAST NO HZ
- Added InteractiveX cpu governor
- Default IO Scheduler set to noop
- Config.hz 500HZ
- Improve battery efficiency
- Improve battery AVS Code (source by Intersect-Raven)
- support call record (source by cm7)
- WIFI Driver change to pershoot's kernel driver
(no problem at wifi channel 13)
- Support Voltage Control (VDD Control - /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels_havs)
- Ondemand tweak
- Support AXI,HW3D
- CPU Clock control 128-1190 (not recomanded 128Mhz at AXI Kernel)
- Improve SDHC card stability
- Ultra save battery
mesured Current-widget - minimum 2mA at sleep

3.2r1 -> 3.3 changeset

- change smartass codes and tweak

3.3 -> 3.7 changeset
- change AVS, Cpufreq Driver
- Excluded Smartass governor
- add SmartassV2 CPU Governor
- add Lagfree CPU Governor
- add Lazy CPU Governor
- VFP Compile flag change
- module tun.ko, cifs.ko
- change WIFI Driver by pershoot

3.7 -> 3.9 changeset
- High frequency cpu clock AVS Votage change for improve stability
- amplification sound
- Compiled by Linaro GCC 4.5.4 (2011.08)
- fuse module
- Other module settings changed

KERNEL works on Cyanogenmod, MIUI, Oxygen(higher version) Rom

Strongly recomand "Ondemand" governor
it's smoothest

experience "Extreme Smooth"
Better than iphone4 or GalaxyS2

Next Kernel will be change to base on CM7 Stock kernel

Happy new year!!!!!

Thanks to Cayniarb, Cyanogenmod team, intersectRaven, ch33kybutt, pershoot

Wipe dalvik-cache after update

KGPNeok Nexroid UltimateS v3.3 Kernel source (for developer only)
http://www.multiupload.com/3HIM8VGVMD

bunnahabhain · Dec 10, 2011

Dude, you know how to catch us

Testing it now...

Sent from my Nexus One using Tapatalk

ebautista · Dec 10, 2011

Gotta try this one out! thanks man!
Update: I should say this is smoother. And apps loads faster on my MIUI.

Markdental · Dec 10, 2011

what governor works best?

bunnahabhain · Dec 10, 2011

Markdental said:
what governor works best?

I stayed with smartass2 for a while now on MIUI and Wildmonks Kernel. This kernel lacks that smartass2 govenor, so i am using the tweaked ondemand one. I must say it is smoother and i didn't have any issues so far. Battery drain is ABOUT the same - cannot really give any definite opinions cuz i used it for only hours now.

But i'll report back. Try the ondemand one - its good so far.

giganielsie · Dec 11, 2011

How install it? Should i put the zip on the SD card and install it in the bootloader?

cpm · Dec 11, 2011

Add SmartAssV2 governor please.

Sent from my Nexus One using XDA App

texasice · Dec 11, 2011

[offtopic]Dude you wanna build us an msm-3.0 kernel for ICS?[/offtopic]

revthanki · Dec 11, 2011

[offtopic] What the awesome Texasice asked, above. Please! [/offtopic]

alisabki · Dec 11, 2011

Dude, what are r1? Is this the same kernel version built-in on your ROM as well?

kgp700 · Dec 11, 2011

ebautista said:
Gotta try this one out! thanks man!
Update: I should say this is smoother. And apps loads faster on my MIUI.

thanks

Markdental said:
what governor works best?

i strongly recommand ondemand

bunnahabhain said:
I stayed with smartass2 for a while now on MIUI and Wildmonks Kernel. This kernel lacks that smartass2 govenor, so i am using the tweaked ondemand one. I must say it is smoother and i didn't have any issues so far. Battery drain is ABOUT the same - cannot really give any definite opinions cuz i used it for only hours now.

But i'll report back. Try the ondemand one - its good so far.

smartass is bad working on my kernel
strongly recommand ondemand

giganielsie said:
How install it? Should i put the zip on the SD card and install it in the bootloader?

update on recovery mode

cpm said:
Add SmartAssV2 governor please.

Sent from my Nexus One using XDA App

i tried to add smartassv2 but it has some problem
sorry

texasice said:
[offtopic]Dude you wanna build us an msm-3.0 kernel for ICS?[/offtopic]

that's very interesting

if you provide kernel source,
i'm try to build kernel

revthanki said:
[offtopic] What the awesome Texasice asked, above. Please! [/offtopic]

alisabki said:
Dude, what are r1? Is this the same kernel version built-in on your ROM as well?

it's little change
added Improve SDHC card stability on r1 version

kgp700 · Dec 11, 2011

test kernel is out

-change smartass codes and tweak

but still strongly recommand ondemand

i tried to smartassv2 but it has critical problem

not include smartassv2

it's unsigned packge

alisabki · Dec 11, 2011

kgp700 said:
test kernel is out

-change smartass codes and tweak

but still strongly recommand ondemand

i tried to smartassv2 but it has critical problem

not include smartassv2

it's unsigned packge

need to wipe dalvik cache too right?

kgp700 · Dec 11, 2011

alisabki said:
need to wipe dalvik cache too right?

recommand that

pongalong · Dec 11, 2011

You say it will work with oxygen and you thank ch33kybutt in your post, does that mean it'll work on his oxygen1mod?

kgp700 · Dec 11, 2011

pongalong said:
You say it will work with oxygen and you thank ch33kybutt in your post, does that mean it'll work on his oxygen1mod?

yes, this kernel working on oxygen1mod
but old version is not working
working on OxygeN1mod-2011.11.26 version or higher version

DaXmax · Dec 11, 2011

Great Job Dude! Didnt know u start a kernel!

Sent from my GT-I9000 using Tapatalk

kgp700 · Dec 11, 2011

DaxElectro said:
Great Job Dude! Didnt know u start a kernel!

Sent from my GT-I9000 using Tapatalk

thanks!!

aujbman · Dec 11, 2011

This seems to break my wifi. After flashing, everything seems okay but wifi just says 'error' when I try to turn it on. Anyone else have this?

I am on CM7 newest nightly

Come to think about it, ever since I flashed one of his previous builds, every time I try to flash a diff kernel I get this problem. Think I had this problem with one of IR's kernels...

jolinnard · Dec 11, 2011

aujbman said:
This seems to break my wifi. After flashing, everything seems okay but wifi just says 'error' when I try to turn it on. Anyone else have this?

I am on CM7 newest nightly

Come to think about it, ever since I flashed one of his previous builds, every time I try to flash a diff kernel I get this problem. Think I had this problem with one of IR's kernels...

4 hours with lastest kernel (r2) and Wifi ON. No problems at all.

[KERNEL] KGPNeok Nexroid UltimateS v3.9[38.8][2012-01-08]|Extreme Smooth & Stable

Senior Member

Attachments

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Retired Recognized Developer

Senior Member

Senior Member

Senior Member

Senior Member

Attachments

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Top Liked Posts