[CLOSED][ROM] Android 2.3.7 - CM 7 – Huawei U8120 – Anryl

Search This thread

anryl

Inactive Recognized Developer
Jan 27, 2007
2,961
1,651
prague
POCO M3
Redmi Note 10 Pro
Installation

1. Flash a recovery image (tested with AmonRA.)

2.a Copy the .zip file to your MicroSD card and boot the phone into recovery mode (call+volume-up+power)
or
2.b Put device in recovery mode and start msusb and with adb or adb-windows
-----adb shell mount /sdcard/
-----adb push romFILE.zip /sdcard/
-----------------------------------------this is allways pushed properly onto sdcard no read errors


3. Choose "Flash zip from sdcard" and choose the zip you just copied.

4. Wipe data+cache before rebooting if it the first install of this ROM. When upgrading with future updates you propably won't need to wipe again.

OR

Install Superboot (via Windows PC)
Download Superboot: DOWNLOAD (MediaFire) / MIRROR (ROMraid / CoBlitz) and extract to a directory
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS - double click 'superboot-windows.bat'
Phone will startup, seems to hang and eventually reboots itself.

Root the V845 (via Windows PC)
Download AmonRA Recovery 1.6.2: DOWNLOAD (MediaFire Pro) / MIRROR (CoBlitz / ROMraid) and extract the zip file
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS PC - (ensure the V845 is connected via USB) double click 'install-recovery-windows.bat'
then run in cmd
fastboot-windows.exe reboot
or
Remove battery and start phone (not sure how to do this otherwise)

FIRST MAKE NAND BACKUP IN RECOVERY pwr+vlUp+green

I'm doing the ROM on VODAFONE 845 aka HUAWEI U8120 if u try it on another device i dont care it might work but i will remove all unused stuff from kernel later on so it might not work on another devices :D

U'RE FLASHING U'r DEVICE SO DO NOT BLAME ME IF SOMETHING GOs-AS-S WRONG

I'm using TITANIUM Backup for apps restore it is free on market

Thnks goes to ALL SHARING DEV's ON XDA MODACO and SO on. THNX GUYS.

Original Downloads:
Original Vodafone ROM
Original Vodafone Recovery


ORIGINAL UNROOTED LATEST VF ROM CZ

this is the updata.app released by vodafone redone by me to update it is working as original not rooted
ROOT ONE CLICK





anryl said:
 

Attachments

  • recovery-clockwork-pulsemini-v1.8.1.4.img.zip
    3.3 MB · Views: 2,776
  • recovery-clockwork-4.0.1.5-u8160-update_signed.zip
    3.7 MB · Views: 1,551
Last edited:

anryl

Inactive Recognized Developer
Jan 27, 2007
2,961
1,651
prague
POCO M3
Redmi Note 10 Pro
Rom download links

wallpaper_prash_cm_girls%2B%25281%2529.jpg
thanx beerfriends : drak2 , Nate Thorp

ROM Download's //\\aNDROID browser qtadb for apps backup attached platform tools :cool:


If u like u allways welcome to donate a beer fromV858 Android 2.3.7 on 2.6.32.9 ---- ROM

CM 7.1 2.3.7

Anryl said:


MARKET APPS DOWNLOADS


IMAGES 2.3.7 12-10 ROM





TEST BOOT IMAGES
anryl said:
04-10-4
4-10-2 OC 748
4-10 OC 691 from new source
3-10 OC test4
3-10 OC
Test TURBO 3-10
10/2/2011
23/9/2001 3 - OC default 528 reported not workin
23/9/2001 2 - OC default 528 reported not workin
23/9/2011 1 - OC default 600 reported not working on pulse mini
rev15


  • Updated kernel to 2.6.32-9 own(based on Huawei u8160)
  • EXT4 support
  • OC up to 748 mhz with SET CPU
  • Fixed PWR key layout
  • Fixed screen on/off pwr button
  • usb to pc sd working hotplug :D:D
  • apns removed if u want DATA flash after rom CM7_DATA
  • no Google apps flash after ROM Google APPS
  • Linpack single thread 4.8MFlops on 710MHz WIFI ON no apps killed
  • Linpack single thread 4.7MFlops on 690MHz WIFI ON no apps killed
DOWNLOAD ROM HERE rev.B
DO NOT SWITCH USB TO PC IT WILL JUST PLUG TO PC AND WORK AS SD CARD AND ADB IF U SWITCH U HAVE TO REBOOT IT WILL DO CD ROM AGAIN :) :) :D:D:D:eek::rolleyes::rolleyes::D

DOWNLOAD ROM HERE rev.A

CM7_DATA_ON
CM7_DATA_OFF
Google APPs
NO OVERCLOCK BOOT flash after rom or unpack boot.img and fastboot it or replace in ROM.zip
OVERCLOCK BOOT flash after rom or unpack boot.img and fastboot it or replace in ROM.zip
E-Mail.apk just install it




CH based 2.6.32.9 FroYo ROM
anryl said:
CH U8120 beta 5
- camera OK
- video OK
- GPS OK
- FM radio OK
- Alarm install other alarm app as it will reboot system (some permissions?)
- key lights broken
...................... HERE beta 3 and update to beta 5

CM 7 here pre-alpha testing fixing only for dev's - ROM THREAD HERE
wink.gif
tongue.gif
smile.gif
rolleyes.gif

anryl said:

-recovery HUAWEI ASCEND -from rommanager
-first install task manager to free memory
-then in setting cyanogen set up cpu speed and dalvik and jit
-in setting adwlauncher set swipe down action open notification
-in spare parts set end button

1. setup start provisioning
no : GPS , video , kamera , youtube
yes : ril , wifi , OC up to 748 ....... test it

CM 6 here


anryl said:

permission b&w usb2pc fix - test and report
Google APPS flash over rom
HTC_IME apk

4-24-2011 AnrylCM22 few tests like openGL driver and usb drivers - just test it

Preview off rel 14
04-09-2011 AnrylCM14 fixed permissions for market to show apps - video illusion is working for video taking

---------- AnrylCM14_fix after CM14 for fixing with new boot.img for callerID fix
rel 13app ap2SD from market works :rolleyes:
04-07-2011 AnrylCM10 usb sd card2pc (partialy) working - still no video taking
04-05-2011 AnrylCM9_1 still no video taking- moded kernel - moded key's only pwr wakeup .......
SetMAC fix programm flash like ROM after rom update do not wipe data
04-04-2011 AnrylCM9 (no video recording)
04-02-2011 AnrylCM8 lights back on (no video recording)(no color playback on youtube and galery....)
04-01-2011 AnrylCM7_2 -- camera + compass -- lights NW
03-31-2011 AnrylCM7 -- camera + compass -- lights NW -- phone call not working mic.
03-23-2011 AnrylCM6 -- rotation fixed working
03-19-2011 AnrylCM3
03-16-2011 AnrylCM2
03-16-2011 AnrylCM1 --- not tested if u dare test it :cool:
i'm using attached clockworkmod
recovery

Camera not working
SD from QtADB acessible fine
Sensor not working --- till CM2 on CM3 fixed
Linpack over 5MFlops

AOSP development started tas0s HERE any help welcome
anryl said:

3-3-2011 started dev. off aosp on 2.6.29 kernel on the weekend will have beta's BETA ROMS HERE JUST CHECK IT OUT
-- WIFI OK (mac need fix but WPA ok)
-- Dpad OK (leds need fix)
-- calibration OK need calibrate with pen
-- GPS OK (need agps)
-- Gsensor little fcuked :)
-- camera not working
-- Linpack 5 Mflops
-03-04-2011 AF1

FROyO
anryl said:

MOUSE and D-PAD disabled

DO NOT RESTORE DATA APPS BEFORE FULLY TESTING THE ROM​
google sync will damage wifi


TO DO
1: FIX D-PAD - DISABLED
2: FIX SCREEN DRIVER
3: FIX WIFI SLEEP
4: ADD CALIBRATION APPS


anryl said:

kernel 2.6.32.9 moded Over Clocked up to 691 MHz
2/21 release 20.3 few fixes :eek: jit enabled jit disabler /\jit enabler
2/20 release 20.2 flash release 20 and update 20.0-20.2 might upload later full rom
2/20 release 20 WiFi TURN OFF after every use otherwise will reboot the device after sleep and turn off wifi

rel20 updates here just flash them over release 20 rom in amonra so no need to wipe
- u can use byte tornado to dwnld to sdcard root and then flash :cool:
updates
1 - build.prop might use it later with rom updater will see
2 - media my custom boot animation from my avatar :cool:
3 - remove my animation from rom :)
4 - update 20.0 - to - 20.2 fix WiFi sleep


anryl said:
OLD releases
2/17 release 8_3 Fixed Wifi MAC finaly i hope
2/16 release 8 _ 2 TEST IT :) wpa change in system/bin in wpa conf change group wifi to system. enjoy
2/15 release11 WIFI noOK TOUCH-calibration apps OK display driver still fcuked - might work on 8100 reenabled extra key
2/14 release 8 WIFI NOok TOUCH calibration app OK use pen for calibration or smaller fingers :D

kernel 2.6.32.9 moded Over Clocked 614 MHz

2/13 release 5 on Cas_XP BETA3/2/1 ROM
2/11 release 3 on Cas_XP BETA3 ROM
2/11 release 2 on Cas_XP BETA3 ROM NO WIFI
2/7 release 1 no WIFI on Cedrik FROZEN FRUIT ROM
anryl said:

APPS I'm USING ALLWAYS

NAVIGON / Titanium Backup / AndroZip / ByteTornado / FancyWidget 1.3 / Opera Mini /Quick Settings /Root Explorer /SetCPU /Swapper Configurator / Task Manager / Terminal Emulator / Tune In Radio



anryl said:

BOOT IMAGES for TESTS u can use on tahawa 2.2 cas_xp 2.2 cedric 2.2 roms
turn off phone hold red volDn power release and connect to pc
just use in LINUX
fastboot flash boot boot5.img
fastboot reboot
or windows
fastboot-windows flash boot boot5.img
fastboot-windows reboot

to recover old boot.img just unpack from old rom and flash it the same way

http://www.4shared.com/dir/nQer4MnT/BOOTimages.html
No 5 and 6
5 - 12-2-2011 up to 691 MHz
6 - 13-2-2011 up to 691 MHz
boot15imgpluscamfixforBeta8tar fix for release8 for WiFi and camera - put libaudio.so into system/lib with rootexplorer and reboot

 

Attachments

  • HTCCalibrate.apk
    92.3 KB · Views: 584
  • platform-tools.zip
    2.3 MB · Views: 1,365
  • cm7Calibration.zip
    207.7 KB · Views: 1,946
Last edited:

anryl

Inactive Recognized Developer
Jan 27, 2007
2,961
1,651
prague
POCO M3
Redmi Note 10 Pro
GUIDES

SD CARD SPEED FIX
Code:
init.rc -- ad lines
# sd card read speed fix
       write /sys/devices/platform/msm_sdcc.1/mmc_host/mmc0/mmc0:1234/block/mmcblk0/queue/read_ahead_kb 2048


Custom rle attached
2aew488.jpg

gimp save picture as raw -> then
5652rgb < initlogo.raw > initlogo.rle -rle

MODDING ROMS ON WINDOWS

anryl said:
1.download rom u want to use
2.download my batch'es rel2 -- stil fixing them so its just first working test
3. put rom into IN folder
4.run menu.bat
5.extract modify rom ----> In KITCHEN FOLDER
6. extract create sign kopy install :)
For updates u'l find out :)
MODDING ROMS ON LINUX - kernel - kitchen .....
anryl said:


dsixda kitchen
On UBUNTU 10.10
install java5 all dsixda kitchen thread how to make it run
dsixda said:
Ok, as a last resort (and if you don't want to downgrade your Ubuntu), then download the .bin file for Java JDK 5 (not found in Ubuntu, so you'll need to install it manually). Then, do the following:
Change to the folder that contains your JDK 5 download. e.g. cd ~/Downloads
Do a chmod +x name_of_your_jdk5.bin and then sudo ./name_of_your_jdk5.bin to install it.
Open up the file ~/.bashrc (OR /home/your_id/.bashrc) and add the following at the END of the file:
export JAVA_HOME=path_to_your_jdk5_folder, e.g. /home/dsixda/Downloads/jdk1.5.0_22
export PATH=$JAVA_HOME/bin:$PATH (BELOW the previous line)
Launch a new terminal session by typing "bash" or just type source ~/.bashrc.
Verify your Java 5 (or 1.5) is installed with the command "java -version". Voila!

anryl said:
get sdk and ndk or download here the tools only
android-sdk_r09-linux_x86.tar >> put platform-tools files into /bin or make path to them
android-ndk-r5b-linux-x86.tar.bz2 >> put from prebuild linux-x86 bin all files into /bin or make path to them

anryl said:
KERNEL source all in terminal cd /where/is/kernel
HERE
CONFIG FILE .config >> file in root of kernel HERE
Cas_XP patch { in root of kernel patch -p1 <../mmc.patch }HERE
OC PATCH HERE

anryl said:
.config >> file in root of kernel
DISABLE MOUSE IN .config "# CONFIG_INPUT_MOUSE is not set"
DISABLE OK BUTTON .config "# CONFIG_HUAWEI_FEATURE_OFN_KEY is not set"

anryl said:
CREATE zImage in terminal "make -j4 ARCH=arm CROSS_COMPILE=arm-eabi- zImage"
-j4 is for my 4core CPU :cool: << this one in base kernel directory will create in arch arm boot "zImage" file that u put into kitchen "BOOT-EXTRACTED" with advanced menu 20 then u redo boot.img in kitchen and with (device power volDN redkey) " fastboot flash boot /where/kitchen/WORKING_date/boot.img " and "fastboot reboot"

anryl said:
IF u need the kernel OUTPUT just turn off the phone connect to pc turn on the phone and type "adb shell cat /proc/kmsg > log.txt" so often till its recording the log to finish just press ctrl+c then u'l see the log

anryl said:
make -j4 ARCH=arm CROSS_COMPILE=arm-eabi- mrproper >> cleans the kernel
make -j4 ARCH=arm CROSS_COMPILE=arm-eabi- oldconfig >> cleans just for new config check
make -j4 ARCH=arm CROSS_COMPILE=arm-eabi- menuconfig >> create setting GUI
make -j4 ARCH=arm CROSS_COMPILE=arm-eabi- zImage >> create kernel file z_image in arch/arm/bin


anryl said:
speed up CM build from 50 min to 15 min :)
u need 6gb RAM or MORE
u have to make link /dev/shm ~/android/system//out/target/product/u8120/obj
before u make next build delete all directories from obj
it will build it in ram so after reboot it will no longer be there
Code:
#! /bin/bash
#. build/envsetup.sh
#brunch u8120
if [ "$1" = "" ]
then 
  echo Insert u8100 to make u8120 from u8100 source
  wait
else
  if [ "$1" = "u8100" ]
  then 
    rm -f -R /home/anryl/android/system/out/target/product/u8120/*
    mkdir /dev/shm/obj   
    ln -s /dev/shm/obj /home/anryl/android/system/out/target/product/u8120/obj
    . build/envsetup.sh && USE_CCACHE=1 brunch $1
    rm -f -R /dev/shm/obj
  fi
fi
 

Attachments

  • initlogo.rle.zip
    6.7 KB · Views: 308
  • 565.zip
    4.7 KB · Views: 248
Last edited:

joilaroi

Senior Member
Oct 6, 2010
250
402
i do wipe before and wipe after flash and allways no bootloop so dont know probably different vodafone devices :( the rom is fully tested on my device
u can try clockwork 1.8.1.4 pulsemini

i DID A WIPE AGAIN AND IT WORKED. TESTING IT NOW :)

THE WIFI IS NOT SEARCHING NETWORKS AND IT SHUTS DOWN
 
Last edited:

bitye

Senior Member
Nov 8, 2010
1,094
358
Várpalota
Ok, I tested R2. Wifi not worked, but DPAD disabled 100%, so no crashes, not the best, but made the rom usable. I will try R3 now.

Calibration app still missing right?

R3: Wifi works till first reboot after got ERROR! message, and can't reconnect, just searching
 
Last edited:

ahlidap

Senior Member
Apr 11, 2007
144
1
Aveiro
Hi anryl,
I've tested your new rom release and:

@U8120
1. Calibration is better on cas_xp rom
2. Full wiped (rom installed twice) and wifi isn't working.. "can't detect networks" and the wifi turns off

Have turned off and turned on the phone but I can't get wifi to work...

3. D-pad 100% disable (good... on cas_xp d-pad click freezes)
4. Camera app now gives an error when trying to record a video, like in cas_xp rom..... :(


SO, both roms perfectly joined, and we get a "perfect" FROYO rom (with some mods needed by D-pad, keyboard light... and probably some other thing)



Keep the good work ;)
 

ahlidap

Senior Member
Apr 11, 2007
144
1
Aveiro
I was thinking and...
May I assume that the "Video Recording" problem is related with something in the kernel because the wifi?


=/ or is this a stupid thing?
 

anryl

Inactive Recognized Developer
Jan 27, 2007
2,961
1,651
prague
POCO M3
Redmi Note 10 Pro
i need to manage wifi into cedrics base then it will work camera and wifi after that i need to find the calibration data that i can take 2.1 data and insert into rom dont know where it is yet
 

cedric123

Senior Member
Sep 5, 2010
924
321
28
Almere
xdaforums.com
Thanks for this post I am not able to make a ROM right now but i hope all issues will be fixed soon.
i only got 2 suggestions.
-Can you make an overclock patch til 691Mhz?
-The d-pad is disabled thats great but can you enable it in the future?
-Fully working wifi
-Perfect calibration for every device.(we can only archieve this with 3 difrent roms cuz the celibnration is on every huawei u81xx phone diffrent

Thank you so much for this ROM




EDIT:::

Hi anryl can you tell the commands how i can start crosscompiling and make my own kernel?
i am runnnung ubuntu 10.10 do i need to install any 3rd party software?
Where is the calibration config in the kernel source.
How can i inplant a .config and mmc.patch?
When i compile the kernel is it a boot.img or a kernel-boot.img file and i need to create the boot img after compiling
Thanks

BTW. if anyone know the answers plz tell me
 
Last edited:

anryl

Inactive Recognized Developer
Jan 27, 2007
2,961
1,651
prague
POCO M3
Redmi Note 10 Pro
Thanks for updating post but i still cant get it working.
When i run commands it says: arm-eabi-gcc not found
and i get thousend of diffrent choises and error.

So cant you explain completly how you compiled the kernel.
I would realy want tthat
its updated just download the ndk and sdk and put into u'r path or put into bin

or in /home/cedric/.bashrc add last line
"export PATH=/home/cedric/android-sdk-linux_x86/platform-tools:/home/cedric/android-ndk-r5b/toolchains/arm-eabi-4.4.0/prebuilt/linux-x86/bin/:/usr/lib/jvm/java-1.5.0-sun:$PATH"
 
Last edited:

anryl

Inactive Recognized Developer
Jan 27, 2007
2,961
1,651
prague
POCO M3
Redmi Note 10 Pro
Still having issues will try again tomorrow

if u run ECHO $PATH
u will see the path there is allways /usr/bin so u can copy the files arm-eabi-* to /usr/bin or anywhere where is ur path looking and u copy as well the fastboot adb and so files there as well so it is working allways
if u're done u can type arm-eabi-gcc it should report no input files then all is OK
 

Top Liked Posts