Most of my lockups happen while using mxplaye. Funny enough, I also get hardlocks while using Splashtop THD...has happened since I switched to using the rom with Motley kernel.
[ROM][May 13][JB 4.2.1] AndroWook Prime Hairy Bean v2.2 **Unleash The Beast!**
- Thread starter flumpster
- Start date
-
- Tags
- development
What is in this PM I wonder, and why did a lot of other devs get a post about a pm? Hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm....
---------- Post added at 09:16 PM ---------- Previous post was at 09:15 PM ----------
Most likely because Motleys v3.0.x kernel was included instead of the old 2.x version (not Linux kernel version, mind you) and he re-added a few tweaks he missed in converting to the new firmware base.
just asking advice about something.
pretty sure it's a gimmick too...the "Beats" are all about the headphones....if you have a Beats kernel with garbage headphones it's sound like sh*t...beats headphones will provide the best Beats experience....
The best Beats experience is still crap. They sound muffled and flabby. Just use a decent EQ and dial your sound in.
Sent from my SCH-i500 using XDA
after flashing AndroWook Prime v1.34 the about tablet on the settings still shows AndroWook Prime v1.33 ,it is this correct or i did any mistake ?
My prime also showed 1.33. I thought I was the only one.
Sent from my GT-I9300 using Tapatalk 2
Yeah forgot to change it to v1.34 in the build.prop. Its only a name nothing else is effected.
Yep Beats is overated. Its not about the headphones and its not special hardware either. The Beats headphone trigger a process when plugged in the activates a sound profile so looking like the some awesome, special piece of equipment where they are not really. This was proved on the Sensation & Sensation XE where they modded it so normal headphones would trigger the process that the Beats ones did and both sounded exactly the same.
Hope this clears it up and NO I wont be including it as DSP is far superior.
Hello everyone and happy fathers day!
First let me say that the ROM is fast and smooth and i appreciate all the work the dev's do on XDA (especially the ones working with my devices). Now Mr.Wook First i am a noob so i'm not sure how to do a lot. I think i have the flashing ROMs down and i can use ADB, and that's about all my base knowledge if you need to know to help me.
i'm running Asus prime, balanced mode , with v1.32 wook, i did a fresh install using cwm and i cleared tablet before hand with prime full wipe.
I tried to watch a rip of my DVD John carter yesterday and it took me about three hours because every 10min or so it would just stop and take me to MX player menu screen. i tried SW and HW neither helped. Also this morning the browser would not stay open. There was no force close or "not responding" message it just kicked me to the home screen.
Sorry this is long but i'm not sure how much information you need. I'm going to flash the newest update to see if it fixes it but wanted to ask if anyone thinks the prime full wipe could be a culprit. I love the ROM just not sure i can use it without being able to watch moves or use browser. Any help will me appreciated.
First let me say that the ROM is fast and smooth and i appreciate all the work the dev's do on XDA (especially the ones working with my devices
). Now Mr.Wook First i am a noob so i'm not sure how to do a lot. I think i have the flashing ROMs down and i can use ADB, and that's about all my base knowledge if you need to know to help me. i'm running Asus prime, balanced mode , with v1.32 wook, i did a fresh install using cwm and i cleared tablet before hand with prime full wipe.
I tried to watch a rip of my DVD John carter yesterday and it took me about three hours because every 10min or so it would just stop and take me to MX player menu screen. i tried SW and HW neither helped. Also this morning the browser would not stay open. There was no force close or "not responding" message it just kicked me to the home screen.
Sorry this is long but i'm not sure how much information you need. I'm going to flash the newest update to see if it fixes it but wanted to ask if anyone thinks the prime full wipe could be a culprit. I love the ROM just not sure i can use it without being able to watch moves or use browser. Any help will me appreciated.
Hello everyone and happy fathers day!
First let me say that the ROM is fast and smooth and i appreciate all the work the dev's do on XDA (especially the ones working with my devices
i'm running Asus prime, balanced mode , with v1.32 wook, i did a fresh install using cwm and i cleared tablet before hand with prime full wipe.
I tried to watch a rip of my DVD John carter yesterday and it took me about three hours because every 10min or so it would just stop and take me to MX player menu screen. i tried SW and HW neither helped. Also this morning the browser would not stay open. There was no force close or "not responding" message it just kicked me to the home screen.
Sorry this is long but i'm not sure how much information you need. I'm going to flash the newest update to see if it fixes it but wanted to ask if anyone thinks the prime full wipe could be a culprit. I love the ROM just not sure i can use it without being able to watch moves or use browser. Any help will me appreciated.
Have you tried a different video player like stock or maybe something like DicePlayer? What about a different video.
Did you reboot and see if that fixed the issue with the video and MxPlayer?
Sometimes the flash can corrupt something so reflashing the build you are on after wiping cache/dalvik cache/factory reset/system or doing those wipes and flashing the new version will clear it up with no explanation at all.
Did you restore apps from titanium backup or go through the play store and restore from there?
If you restored from titanium try reinstalling everything from the play store.
Before you reflash I would try to clear cache/dalvik cache before and see if that helps.
I always try to do everything I can before I reflash the ROM to try and save me time.
Hope this helps.
I flashed 1.31 cause i was missing some of my apps when using the ww roms and wanted to see if I would get them back with the us rom and yes they all came back and last night watching a ripped video with my kids it locked and rebooted only once, i was using mx player as well and was installed from market ....
Overall it its very smooth rom and like it a lot
Overall it its very smooth rom and like it a lot
Flat Black Theme
Not sure if anyone is interested, but here is a partial theme modified for the .28 systemui.apk. I didnt create it, just used the theme from this thread, and threw the pngs into the .28 systemui.apk that was used in wooks rom. The OP hasn't updated his to .28 yet. Just thought I'd share. It primarily gets rid of the blue/purple in the quick settings.
Not sure if anyone is interested, but here is a partial theme modified for the .28 systemui.apk. I didnt create it, just used the theme from this thread, and threw the pngs into the .28 systemui.apk that was used in wooks rom. The OP hasn't updated his to .28 yet. Just thought I'd share. It primarily gets rid of the blue/purple in the quick settings.
Attachments
loaded AndroWook Prime v1.34 WW28 Motley Kernel v3.0.4b with USB Mount Fix
works great - connects USB - and performs fantastic
Got #50 in antutu - so that is good enough for me.
Very smooth & fluid
Thanks to everyone for all the hard work on this combo !
works great - connects USB - and performs fantastic
Got #50 in antutu - so that is good enough for me.
Very smooth & fluid
Thanks to everyone for all the hard work on this combo !
Are there any themes that work on 1.34? I tried the cobalt theme but it gets stuck on the boot screen and i had to reinstall 1.34
Yes. I have a version built now and am testing it before release.
Sent from my Transformer Prime TF201 using XDA Premium HD app
It wont work as they were for .21 base and AndroWook v1.34 is .28 base.
Sent from my Transformer Prime TF201 using XDA Premium HD app
So I wiped cashed and delvic and Mx player still not working right, nor stock using dice player however plays video just fine. So I'll be using it instead. The browser is working better since reboot but their is still one website kicking me to home screen, its a google search for vets in my area in a google review page, but since I can't duplicate on other sites I can live with it. I'm still thinking of flashing the newest version but since this one is working better now I might give it sometime to see if it will settle down and fix these minor problems. Also I don't use titanium so all apps are from store.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
321
Follow us on Twitter, Facebook & Google+ for updates on builds.
mrwookie6379 - Founder & Development Team
flumpster - Development Team
DarkMinax - Testing Team & Hosting
art-mas - Graphical Team & Testing
andy_rose - Testing Team
whycali - Testing Team
Subsonic44 - Testing Team
Lostsorrow - Graphical UI Team & Hosting
McJesus15 - Testing Team
- AndroWook Prime Hairy Bean v2.2
- Rebuilt from new WW stock base 10.6.1.15.3 based on TF300 Rom.
- Added Surdu_Petru Kernel and Data2SD Version.
- Added Reverse Axis Kernel and Data2SD Version for people with replacement screens.
- Fixed GPS Dongle.
- Added More HDMI Devices.
- Fixed Cifs not showing files in Apps. Do not mount to Internal SD. Mount to mnt/cifs or Removable/MicroSD.
- Added Dock Browser Changer to select what browser to open on Dock button.
- All Previous Mods and Tweaks Included & Updated.
- Added Option to install Browser2Ram script for Stock Browser and Chrome.
- Added Option to install Trickster Mod for CPU control with Surdu_Petru Kernels.
- Updated All Google, Asus and Optional Apps.
- Added SQL Vacuum Script.
- Remade Advanced Power Menu for new Base.
- Removed Bloat that can be downloaded from Google Play.
- And much much more.....
- AndroWook Prime Hairy Bean v2.11
- Fixed Aroma Touch Screen Issues on TF700.
- Fixed Aroma Selection/Deselection Bug When Scrolling.
- Added Aroma Exit/About Screen on Power Button.
- AndroWook Prime Hairy Bean v2.1
- Multi Device Added selectable in Aroma.
- Data2SD Kernel Option
- Fixed Search Bug
- Remade Power Profiles.
- Updated Google and Asus Apps.
- Added LMT (Pie Navigation) and Full Screen App.
- Added Furry Background is Back. Optional Stock Framework in aroma.
- AndroWook Prime Hairy Bean v2.0
- Android 4.2.1
- Rebuilt from new WW stock base 10.6.1.8. based on TF300 Rom.
- Full working Advanced Power Menu including Reboot, Reboot to Recovery, Reboot to Bootloader and Hotboot option.
- Custom AndroWook Boot Animation & Launcher Wallpaper.
- Custom Themed AndroWook TWRP built into Upgrade zip.
- Rooted and De-Odexed System App & Framework.
- Fully zip alligned ROM with intelligent zip allign at every boot.
- Aroma 2.56 Custom AndroWook themed installer.
- Init.d scripting enabled in kernel ramdisk.
- Automatic Permissions script run at boot.
- Memory Tweaks performed at boot.
- Latest Busybox installed.
- SYSRO & SYSRW binary's included.
- Selective performance enhancing build.prop tweaks.
- Fixed docking problems.
- Fixed bluetooth.
- Fixed DRM.
READ EVERYTHING CAREFULLY. THIS IS NOT JUST FLASHING ANOTHER ROM
This Rom has been tested by many people but if you do not follow the instructions correctly or then go on to flash an incompatible TWRP you can brick yourself.
DO NOT INSTALL ANY OTHER RECOVERY WHILE USING THE NEW 4.2.1 BOOTLOADER, THEY ARE NOT COMPATIBLE AT THE MOMENT, THE ONE BUILT IN IS MODDED. USE THE DOWNGRADE ZIP TO TAKE YOU BACK TO 4.1.1 BOOTLOADER AND RECOVERY IF YOU NEED IT.
By downloading and installing the below you are in agreement that you understand the risk associated with doing this which in a worse case scenario could result in a bricked Transformer Prime. Therefore we are not responsible or liable for any issues you encounter although we will do our best to TRY to help you resolve them.
Thank you.
- Battery above 20 percent.
- An Unlocked Transformer Prime with a custom recovery.
- A Micro SD to copy install files to as the Internal Storage will be wiped during install.
- All valuable files removed from your Transformer Prime.
- The files from the Download section below.
- NVflash installed if you want to go back to any other ROM not built on official JB. This is more a recommendation rather than a requirement and ROM will install without NVflash just fine.
- ....and finally the ability to read. Honestly this is this biggest mistake people make is they do not read things correctly so read, read and READ again just to be sure.
NOTE** You MUST be on the new 4.2.1 bootloader to be able to flash this new version which is available in the next section.**
- If you are already on HairyBean 2.xx you do not need to flash the "Upgrade Hairybean 4.2.1 Bootloader & Recovery.zip" again.
- TF700 Owners. Do not flash "Upgrade Hairybean 4.2.1 Bootloader & Recovery.zip". Make sure you are already on 4.2.1 Bootloader and have TWRP working and just flash the rom.
- Download "Hairybean 2.2.zip" and "Upgrade Hairybean 4.2.1 Bootloader & Recovery.zip" from the links below and copy to Micro SD.
- Boot into recovery and flash "Upgrade Hairybean 4.2.1 Bootloader & Recovery.zip" from Micro SD card.
- Click restart after completion and on restart LET THE BLUE LINE FILL ALL THE WAY, WHEN IT IS FINISHED IT WILL RESTART ITSELF BACK INTO TWRP.
- Go to wipe options and do a factory reset, clear cache, clear dalvik, wipe system and finally format data.
- Go to Install options and flash "Hairybean 2.2.zip" from Micro SD card.
- When install is completed restart and allow 30-60 mins for the system to cache itself and then restart again upon which time you should now have a nice smooth TP.
- Enjoy!
Upgrade Hairybean 4.2.1 Bootloader & Recovery.zip
Mirror 1
Mirror 2
Mirror 3
MD5 Sum - 73080E25C50021CCE72F8D6C8801A739
Hairybean 2.2.zip
Mirror 1
Mirror 2
Mirror 3
Mirror 4
MD5 Sum - E84A0239D7793B556F9E61BF09655725
- Download "Downgrade Hairybean 4.1.1 Bootloader & Recovery" from one the link below and copy with your preferred 4.1.1 rom to Micro SD.
- Boot into recovery and flash "Downgrade Hairybean 4.1.1 Bootloader & Recovery" from Micro SD card.
- Click restart after completion and on restart LET THE BLUE LINE FILL ALL THE WAY, WHEN IT IS FINISHED IT WILL RESTART ITSELF BACK INTO TWRP.
- Go to wipe options and do a factory reset, clear cache, clear dalvik, wipe system and finally format data.
- Go to Install options and flash your preferred 4.1.1 rom from Micro SD card.
Downgrade Hairybean 4.1.1 Bootloader & Recovery.zip
Mirror 1
Mirror 2
Mirror 3
MD5 Sum - 86FBD4986C95637DB339ACB23B4E0C89
- Rebuilt from new WW stock base 10.4.2.17.
- Added Custom install option to allow users to choose each individual APK that is installed.
- Added Rebuilt Advanced Power Menu as previous version not compatible with new base.
- Added DRM fix so able to now watch Google Films. A first for TF201 Jelly Bean!!
- Added GPS fix for intermittent GPS on new base.
- Added Flash Player fix for new base.
- Added AndroWook graphics to setup wizard and system menus.
- Updated Busybox to Version 1.20 (just for James)....LOL
- Removed Complete, Typical, Minimal & Ultra Minimal options as no longer required.
- Added Adobe Flash Player Option, Fix and moved to Data Partition rather than System Partition.
- Added Memory Fix for when to many apps being installed to the System Partition.
- Added Launcher Installation fix in Aroma Installer.
- Added Option on install default framework and remove AndroWook fur.
- Corrected Asus Widget names in Aroma Installer.
Android File Host
http://www.androidfilehost.com/?fid=9390210501348163621
MD5 Sum - 3dbc82d2eaaf5f9eb74bf862d49f0365
ROM Hut
http://romhut.com/download/asus-eee-pad-transformer-prime-tf201/androwook_prime/hairy_bean_1_51
MD5 Sum - 3dbc82d2eaaf5f9eb74bf862d49f0365
NOTE** You MUST be on the official JB 4.1.1 bootloader to be able to flash this version. This was included in v1.3 but has been removed in v1.51. If still on ICS bootloader please follow Upgrade Instructions for ICS in post 2**
- Download AndroWook Prime Hairy Bean v1.51 from one of the links above and copy to either root of internal SD or micro SD.
- Boot into recovery and if you are doing a dirty flash then just wipe cache and dalvik cache and if doing a clean flash then select factory reset as well. You can wipe system as well if you want a total deep clean but do so at your own risk.
- Select to install ROM from SD and follow on screen prompts. NOTE** If selecting Data2SD kernel you MUST ensure you SD is formatted with FAT32 as the first partition and EXT4 as the second partition.
- When install completed allow 30-60 mins for the system to cache itself upon which time you should now have a nice smooth TP.
- Enjoy!
Thanks
- All of my Team and Beta Testers......couldn't have done it without you.
- Huge thanks to art-mas for his amazing graphics. You can view the Androwook graphics by clicking HERE or view the rest of his amazing website at http://www.art-mas.com/
- elesbb for browser changer mod on dock.
- NRG for working with me on the bugs.
- Everyone I forgot......
- ......and you guys for using my ROM and giving me something to do. Thank you.
108
- NOTE** You MUST be on the JB 4.1.1 bootloader to be able to flash these files. DO NOT FLASH THESE ON THE 4.2.1 BOOTLOADER AS THEY CAN BRICK YOU
- Download one of the files below for your install type (normal or data2sd)
- Extract folder on PC and run the "HairyBean TWRP Recovery Flasher.bat" file.
- Follow the on screen instructions.
- Delete TWRP settings from sdcard and external sdcard. (/TWRP/.twrps and .version)
- We are not responsible for any bricks caused by updating your bootloader. It is advised to do the nvflash process first so you cannot hard brick your device ever. If you are not happy to do it please don't.
- Download Update JB Bootloader.zip and HairyBean 1.51
- Place HairyBean 1.51 and Update JB Bootloader.zip on External SD Card.
- Boot into TWRP, Go to install option and select External up top, Select Update JB Bootloader.zip and install it.
- Select Restart and let the blue line fill all the way, It will then restart and stick on splash screen.
- Hold down Power button and Volume down for 10 seconds and the prime will restart. Keep holding them until the Icons appear. Use volume down to go to fastboot icon (usb icon) and hit volume up.
- Extract the attached file to your desktop "HairyBean TWRP Updater (normal).zip". Run the Hairybean Twrp Recovery Flasher.bat and follow onscreen instructions to flash JB TWRP.
- Once restarted go back into recovery by holding Power button and Volume down for 10 seconds until restart as before and keep holding them until the Icons appear then hit up on first icon (recovery)
- Go to wipe option and factory reset, wipe system, wipe dalvik and wipe cache.
- Go to install menu and flash HairyBean 1.51
Downloads
Update JB Bootloader.zip
Hairybean TWRP Updater (normal)
MD5 sum of "Update JB Bootloader.zip" : F2EDC4929E967E9C5A61110FDCDBAF82
MD5 sum of "HairyBean TWRP Updater (normal).zip" : 55812CCA367C9B33721918C204A8ADFC
- This is for data2sd users. (Hairybean 1.51 only)
- This will mount the old internal storage of the Prime onto the new sdcard with the folder name "Internal SD"
- You will be able to use this folder as normal and it will be accessed by music player and gallery etc.
- Download the file "Mount InternalSD Data2sd.zip" below and place on External SD Card.
- Boot into TWRP, Go to install option and select External up top, Select "Mount InternalSD Data2sd.zip" and install it.
- Reboot
52ANDROWOOK HB 2.0 BATTERY MOD
Very simple 100% battery mod fro HB 2.0 to give true battery life left in 1% increments. There are 2 versions to pick from.
Instructions:
Download the one you prefer then rename to SystemUi.apk
Use ROOT EXPLORER or equivalent to get to the root of the prime to copy the file to /system/app
Change the permissions to rw-r-r
Delete the original SystemUI.apk and then you will reboot automatically
enjoy battery mod.
NEW VERSION UNDER CONSTRUCTION35Hey Guys............
Its been a few days since I made the decision to knock this on the head to spend more time with my family and not being stuck infront of my laptop every night has been great even though it has only been a few days.
That being said after speaking with family and friends I do wander if I somewhat jumped the gun and was being hot headed with cancelling AndroWook so with that being said I am going to remove the discontinued status from the ROM and start provide new versions again.
What I MUST, MUST state though is updates will be in NO way as frequent as they were as my family is still my top priority and I will only be able to work on this as and when I can and can not commit as much time in one session as previously.
Thank you all for the kind words and I do have a new version of AndroWook that I had built and was testing prior to calling time on things and Charliestheman and Lostsorrow have been testing it for the past few days and have said that it is superb so I will get this out in a few days when I have time.
Just to reiterate updates will not be as frequent as before as family/home life takes priority and I will work on this as and when I have time.
I hope this is all ok with everyone.
31Wookie, come back from the dark side mate, your missed.
Hope everything is ok with you.
LOL Thanks.
As you are all aware I've made no secret of the fact that I have had health issues recently and because of that coupled with stresses from work and home it has made me make quite a few rash decisions including walking away from AndroWook a couple of times which I'm sure has pissed off more than a few people..........to those people I truly apologize.
I'm happy to say I am now (fingers crossed) on the mend good and proper and can now see how rash I have been so have decided to come out of retirement one final time to work with the rest of the fellas and, hopefully, give you the best ROM possible available.
Apologize once again for any one I have annoyed with the on, off and on again roller coaster ride but hopefully you can kinda understand.
Thank you all for using AndroWook and for giving an old fool another chance.
Cheers
Ed
