[KERNEL] 2.6.29.6-nAa-14 [23/8/12] Custom Gingerbread kernel + CWM Recovery
- Thread starter nobodyAtall
- Start date
-
- Tags
- naa kernel nobodyatall
can this kernel work with gdx?
Sent from my lovely X8
- Unlocked bootloader (10w38)
- GingerDX v28
- Alf's kernel v8
- Overclocket to 746 Mhz
- Nemus Launcher
- Press THANKS if i help you))
yes, but wifi wil not work
In v13 I have problem with WiFi, connection is very unstable and disconnect me every a few minutes
Sometimes, when I play a Game like Tank Hero, after 5 - 20 mn, a red led flash and the phone reboot after 10 s (I didn't overclock or underclock the phone)...
It's rare but very unpleasant...
It would be very nice if these problem can be solved (including the offline charging logo problem...).
It's rare but very unpleasant...
It would be very nice if these problem can be solved (including the offline charging logo problem...).
Hi im using minicm7 2.2.1 shakira & previously was using alfs 8a kernel. Worked really well wanted to try naa 13 but the **** thing is that the wifi goes 'error'
Hi im using minicm7 2.2.1 shakira & previously was using alfs 8a kernel. Worked really well wanted to try naa 13 but the **** thing is that the wifi goes 'error'
Right after you have flashed nAa 13 kernel,reboot to recovery and wipe cache partition and wipe dalvik cache.After that reboot your phone and check whether the Wi-Fi is working or not.
Hi im using minicm7 2.2.1 shakira & previously was using alfs 8a kernel. Worked really well wanted to try naa 13 but the **** thing is that the wifi goes 'error'
I had the same problem and that didn't fix it, but re-flashing the rom did.Right after you have flashed nAa 13 kernel,reboot to recovery and wipe cache partition and wipe dalvik cache.After that reboot your phone and check whether the Wi-Fi is working or not.
Last edited:
You mean FlashTool right?
Are you sure it's not still a zip or rar file?
Look before replying thanks..
You mean ftf* kernel by flashtool* ??
Make sure it is not in zip or rar.
Try downloading it with Internet Explorer or Opera Mini browser
I'm using this kernel along with minicm7 2.2.1 for exactly 1 month...all i can say is this:
THIS IS AWESOME
BEST FOR DAILY USE
TNX nAa
Sent from my E15i using xda premium
THIS IS AWESOME
BEST FOR DAILY USE
TNX nAa
Sent from my E15i using xda premium
Hi all!
nAa-14 kernel for gingebread is released with ICS DRM support.
Flash and enjoy
nAa-14 kernel for gingebread is released with ICS DRM support.
Flash and enjoy
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
273Search no more. This is THE kernel for your gingerbread X8.
Before unlocking your bootloader, read this thread
If you brick your device, you are the sole responsible.
Features:
- Based on stock 2.6.29 SE sources
- Upgraded to Linux kernel version: 2.6.29.6
- Ported various components from 2.6.35 / 38
- Significantly fast booting time (~25 secs from power button to lockscreen)
- CWM recovery 5.0.2.7 in kernel
- Netfilter support / AP support / Usb tethering
- Swap support
- Tun/Tap
- Mddi fix
- Ext3/4 support
- Modules auto-copying at boot
- Dual touch options:
- Fake dual touch in kernel (thanks to andrej456) (default)
- Modular fake dual touch in kernel (thanks to doixanh)
- Modular no dual touch - Many CPU freq governors to chooce from: interactive, interactivex, minmax, smartass, smartass2, scary and savagedzen
- Modular Undervolt
- NOOP ioscheduler
- TINY RCU
- DM_CRYPT_GLOBAL_WORKQUEUES
- Ramzswap for compcache
- Offline charging embedded in the kernel
- Stable and fast oveclocked frequencies (not enabled by default)
- Frequency table: 19MHz - 864MHz
- Default CPU governor: interactive
- Two way call recording (might be against the law for some countries, you are responsible for using this feature)
- Interface Stat support for ICS
- Memory management and binder improvements from gb kernel
- Many, many feature and stability patches from various kernel sources
- ICS DRM support
IMPORTANT:
- For wifi to work, the ROM MUST have Wifi built from sources as in CM. If this is not the case, the Wifi WONT work, DON'T compain here about that.
- For vibration, the ROMs need to use the gb implementation.
FAQ:
If you have any issues, please read the FAQ thread first: http://xdaforums.com/showthread.php?t=1266911
Requirements:
- Unlocked bootloader --> http://xdaforums.com/showthread.php?t=1254225
- MiniCM7 or any recent gingerbread, source-based ROM
- Flashtool tested to be working with your phone, e.g. from here: http://www.multiupload.com/GYL7A7XQBT Original flashtool thread: http://xdaforums.com/showthread.php?t=920746
Install:
- Backup
- Unlock your bootloader as described here: http://xdaforums.com/showpost.php?p=17384177&postcount=3 or here: http://xdaforums.com/showthread.php?t=1254225
- Download the kernel ftf file from here and move it to Flashtool\firmwares so that Flashtool can pick it up
- Flash the kernel via Flashtool
- Reboot and check Settings -> About Phone:
Uninstall:
- Flash back to stock using Flashtool or SEUS.
Performance:
Notes:
Dualtouch:
- If you want to enable the fake DT by dx (instead of andrej456's which is the default), you have to insert the following line in the /system/etc/hw_config.sh file:
- If you want to remove the fake DT altogether, insert the following line in the /system/etc/hw_config.sh file:
Sources:
The linux kernel is GPL'ed, everyone who does modifications should make them publicly available.
https://github.com/nobodyAtall/nAa-kernel
Credits: the_laser, FreeXperia and the rest of XDA devs who helped bypassing the bootloader!
DaRk_dOg for his awsome boot logo
Donate:
If you are enjoying my work please consider donating:
.
Donations are voluntary but allow me to spend more time on this project.
Disclaimer:
I can't be held responsible if this Kernel bricks your device or makes it explode in your hands! Use it at your own risk!
94nAa-14
- ICS DRM support
- CWM Recovery 5.0.2.8
- Fixed boot into recovery issues
- Latest gingerbread busybox and init
- Panic timeout set to 1sec for shakira
- Fixed touchscreen multitouch modules to load
- Kernel boot animation
- Memory improvements from ICS
- Proximity and Lightsensors report events as they should now
- Fix for robyn keypad
- CWM support for formatting sd-ext
- CWM for shakira is no longer ldpi
- msm/kgsl: Porting kgsl 1.1 from 2.6.35 gives a good performance boost for 2d/3d operations
- acpuclock: Improved overclocking from 2.6.35
- shakira: keyboard reset with HOME + POWER
- pmem: Porting pmem from 2.6.35
- Bugfixes and improvements: sha1, vfs_cache_pressure, net/ipv4, net sched, pid, mm/vmscan.c
- Module for disabling dual touch altogether
- Performance governor selected in recovery
- NOOP ioscheduler (faster for android)
- + 2MB More RAM (184MB in total)
- Possible fix for screen cuts
- Updated CWM recovey to the latest version (5.0.2.7)
- Interactive governor selected in recovery
- Minor smartassv2 fixes
- Possible fix for screen cuts
- Significantly faster booting time (~25 secs from power button to lockscreen)
- Less crasses regarding reboot
- Jhash improvements
- Two way call recording
- Modular dual touch based on dx's DT (replaces existing DT if insmoded)
- Offline charging
- Improved overclocking frequencies in kernel (no overclocking module needed for over 600MHz)
- Interface Stat support for ICS
- Sleep improvements for armv6
- Implemented WLOD on kernel panic
- Ported latest akm8973 sources to work for the mini
- Usb mounting via CWM
- DDMS screen capture
- Updated USB drivers to semc GB sources
- New gb vibrator implementation
- Cpu frequency fixes
- Switched to fake dual touch from andrej456 (seems to be the best choice for the mini)
- CIFS and utf8 support
- CWM 5.0.2.3
- Update to Linux kernel 2.6.29.6
- NPARTS event support for disk devices
- All around Improvements and bug fixes in:
BFQ, mutex adaptive spins, mm, irq, mmc, cpufreq, hrtimer, mtd, memcpy/memmove, yaffs - Removed FPS uncap since it caused issues with scrolling and with some apps
- Gingerbread init/init.rc
- Boot logo
- Fixed ddms screen capture
- BFQ ioscheduler
- TINY RCU
- DM_CRYPT_GLOBAL_WORKQUEUES
- Removed FPS Cap
- Display power-off optimizations
- Droidwall support
- Memory management and binder improvements from gb kernel
- scary and savagedzen CPU governors
- Export scaling_available_frequencies attr in /sys
- Ramzswap support for compcache
- Many bug fixes and optimizations from upstream regarding:
- mm, cifs, sctp, timed_gpio, net sockets, tcp, fs: pipe.c, yaffs, ext4, dm-crypt, arm, sctp
nAa-02
- Ext3/4 support
- Modules auto-copying at boot
- Fake dual touch in kernel (doixahn's 007)
- CPU freq governors: interactive, interactivex, minmax, smartass, smartass2
nAa-01
- Netfilter / AP support (WiFi tethering)
- Swap support
- Tun/Tap in kernel
- Mddi fix in kernel
- Modular Overclock / Undervolt
- CWM recovery v4.0.1.5 in kernel
31
The maximum frequency depends on your device. Mine can stand up to 806MHz.Wow... nobodyatall is back with his new kernel...
what's the maximal fraquency of the Overclock? same as Alfs?
On the other hand you can easily make the kernel report 4GHz and actually run at 600MHz28nAa-13 released. Changelog:
- CWM Recovery 5.0.2.8
- Fixed boot into recovery issues
- Latest gingerbread busybox and init
- Panic timeout set to 1sec for shakira
Let me know if you have any issues with booting into recovery.
Enjoy!23This is a feature needed by the SEMC debrand engine to be fully operational. For the rest of gb roms there should be no effect by this.
We are working closely with Achotjan for this.
