HardSPL kit for ROSE (S740) by jockyw2001

Search This thread

jockyw2001

Inactive Recognized Developer
May 17, 2007
1,709
77
HardSPL kit for ROSE (S740)
====================


Brought to you by JockyW (jockyw2001)
March 20, 2010

Download: http://xdaforums.com/attachment.php?attachmentid=296559&d=1269109944

DISCLAIMER: I WILL NOT BE RESPONSIBLE IF YOU BRICK YOUR DEVICE USING THIS TOOL


Instructions
-------------


1. connect your ROSE with your PC by USB cable and boot into Windows Mobile
2. wait until ActiveSync is ready (icon green)
3. run "flash-hardspl.bat" to flash the HardSPL. It will create a backup of your current SPL
(called "spl-backup.bin") and creates a file "check.bin" in subdirectory "1" (for diagnostic purposes)
4. the phone will be rebooted automatically
5. you can now flash any cooked or original rom, splash screen or radio rom


Notes
-------

- if your device is application locked the batch file will run with errors. To app unlock your device
Download PHM Registry Editor - v0.70 from here:
http://www.pocketpcfreeware.com/en/index.php?soft=31

Copy it to your device and execute it.

Modify this registry key:
HKLM/Security/Policies/Policies/0000101B if set to dword:2, change it to dword:1

Reset using power button and try again.

Alternatively run the cab posted: here

- the HardSPL is based on the SPL v1.54.0000 (Rose, Shipped) for ROSE with modelID ROSE100 (check your modelID in battery compartment)
- a quick verification for correct installation is to boot into SPL tri-colour bootloader screen. In the top-left corner it should display "1.54.Hard"
- to flash back the stock SPL 1.54.0000 run "flash-stock-1.54.0000.bat"
- to flash your original SPL run "flash-your-backup.bat"


Roms
------

Original Asian and Orange ROMs can be found here:
http://xdaforums.com/showpost.php?p=5137413&postcount=1
I have reconstructed Elusivo's dumped rom WM 6.1 build 20279 (german):
http://www.sendspace.com/file/je1iyu

With these rom you can easily set up a kitchen for ROSE.
Check this Kaiser kitchen tutorial for a jump start:
http://wiki.xda-developers.com/index.php?pagename=Kaiser ROM Kitchen Tutorial


Credits
--------

- itsme for his fantastic open source itsutils package
- pof and Olipro for many HardSPL patches
- Elusivo for testing HardSPL


Donate
--------

If you like the HardSPL and appreciate the time and effort I have put into this then feel free to send a PayPal donation to jocky_wilson@hotmail.com
or click the donate button in my signature.


Enjoy,
JockyW
 

Attachments

  • Rose-S740-HardSPL-Kit-by-jocky2001.zip
    625 KB · Views: 8,021
  • tricolor.jpg
    tricolor.jpg
    99.6 KB · Views: 1,169
Last edited:
  • Like
Reactions: milaq and Bockske

stone81

Member
Jun 1, 2009
15
1
belfast
hardspl kit for the rose never thought i would see the day

this is the best news ive had all week lol

many thanks Jockyw2001 and to all others who helped make it happen
 

Elusivo

Senior Member
Oct 5, 2008
271
26
TESTED and WORKING!

wooohoooo :DDD works 100% without any hiccups :D

thanks JockyW ^^ and count on my donation ^^
 

jockyw2001

Inactive Recognized Developer
May 17, 2007
1,709
77
HardSPL was tested and working with a ROSE100.
I've published it now and looking forward to your generous appreciation ;)

Have fun!
 

Profy_X

Senior Member
Aug 4, 2007
391
7
Straßburg
Good job dude!Mine did not pass the test so my phone si stucked in the bootloader :(.But maybe i`ll fixe it this days..hope so..:p.It`s good that someone thaught about a HSPL and managed to make it :D
 

Semmelknoedel

Member
Feb 8, 2009
47
0
Great Great Phantastic

Hi jockyw2001,

What a good and surprising news. I wanted sell my S740 because there was no HardSPL to expect and WinMo 6.1 isn't a hit. But now I'm looking forward to all ROM's based on WinMo 6.5. Thanks a lot for your great work!

regards
Semmelknoedel
 

50watt

Member
Jul 5, 2006
9
0
My experience with JockyW (jockyw2001) HardSPL:

I could not install the referred "PHM Registry Editor - v0.70" (not build for WM 6.1 standard?)
"Total Commander" (for smartphone) ghisler.com/smartphone.htm worked for me though (I'm not allowed to post an external link - sorry).

There is an inconsistency in the first post of this thread and the output of flash-hardspl.bat concerning the application unlock:
JockyW (jockyw2001) writes in the first post of this thread:
Modify this registry key:
HKLM\Security\Policies\Policies
valuename '00001001' was set to dword:2, change it to dword:1 "
flash-hardspl.bat writes:
Phone must be application unlocked !!
If not, add the Registry value "HKLM/Security/Policies/Policies/0000101B" with D
WORD = 1

I guess the output of flash-hardspl.bat is correct but I'm not an expert.

flash-hardspl.bat has the word "ERROR" in its output:
ITSUTILS stream-ERROR: 80072746: Readresult=80090041
The tri-colour bootloader screen indicates that the hard-spl is installed though.

To enter tri-colour bootloader screen follow the instructions of of baliles in this other thread

To leave tri-colour bootloader screen remove the battery

Attached is a screenshot of the output of flash-hardspl.bat
 

Attachments

  • 25.03.jpg
    25.03.jpg
    21.5 KB · Views: 130
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    HardSPL kit for ROSE (S740)
    ====================


    Brought to you by JockyW (jockyw2001)
    March 20, 2010

    Download: http://xdaforums.com/attachment.php?attachmentid=296559&d=1269109944

    DISCLAIMER: I WILL NOT BE RESPONSIBLE IF YOU BRICK YOUR DEVICE USING THIS TOOL


    Instructions
    -------------


    1. connect your ROSE with your PC by USB cable and boot into Windows Mobile
    2. wait until ActiveSync is ready (icon green)
    3. run "flash-hardspl.bat" to flash the HardSPL. It will create a backup of your current SPL
    (called "spl-backup.bin") and creates a file "check.bin" in subdirectory "1" (for diagnostic purposes)
    4. the phone will be rebooted automatically
    5. you can now flash any cooked or original rom, splash screen or radio rom


    Notes
    -------

    - if your device is application locked the batch file will run with errors. To app unlock your device
    Download PHM Registry Editor - v0.70 from here:
    http://www.pocketpcfreeware.com/en/index.php?soft=31

    Copy it to your device and execute it.

    Modify this registry key:
    HKLM/Security/Policies/Policies/0000101B if set to dword:2, change it to dword:1

    Reset using power button and try again.

    Alternatively run the cab posted: here

    - the HardSPL is based on the SPL v1.54.0000 (Rose, Shipped) for ROSE with modelID ROSE100 (check your modelID in battery compartment)
    - a quick verification for correct installation is to boot into SPL tri-colour bootloader screen. In the top-left corner it should display "1.54.Hard"
    - to flash back the stock SPL 1.54.0000 run "flash-stock-1.54.0000.bat"
    - to flash your original SPL run "flash-your-backup.bat"


    Roms
    ------

    Original Asian and Orange ROMs can be found here:
    http://xdaforums.com/showpost.php?p=5137413&postcount=1
    I have reconstructed Elusivo's dumped rom WM 6.1 build 20279 (german):
    http://www.sendspace.com/file/je1iyu

    With these rom you can easily set up a kitchen for ROSE.
    Check this Kaiser kitchen tutorial for a jump start:
    http://wiki.xda-developers.com/index.php?pagename=Kaiser ROM Kitchen Tutorial


    Credits
    --------

    - itsme for his fantastic open source itsutils package
    - pof and Olipro for many HardSPL patches
    - Elusivo for testing HardSPL


    Donate
    --------

    If you like the HardSPL and appreciate the time and effort I have put into this then feel free to send a PayPal donation to jocky_wilson@hotmail.com
    or click the donate button in my signature.


    Enjoy,
    JockyW