<Postedit> I hope you guys don't mind me detailing out all of what I've done with hopes that someone will find it helpful, it's very... verbose. Plus, if I have to share the source, I can remember exactly what files were tweaked to send a smaller than 700Mb file.
Alright, here's my current plan once I get my build environment stable again (oh hey, Ubuntu 10.10? Do it!):
The N1 code has two layers, a wrapper layer and the interface layer. The Liquid E code has only an interface layer which appears compatible to (but different than) the wrapper layer on the N1. I'm going to replace the N1's interface layer to see if it still runs. If it does, we now will have a current kernel build that would allow both drivers to operate, barring complications.
The current driver would have all the wrapper layer code it needs, but the new driver will have the correct interface layer code it needs.
Then, I'll bust open a Liquid E rom (Aren't the Liquid and Liquid E roms interchangeable? That worries me.), hunt down the driver, find out how it starts up in the system, add it to a current rom, test it for differences, and then break the interface layer by putting no-op asm.
This is all simplified (and possibly horribly wrong) of course, but anyone looking at this project may be interested in trying something similar.
Edit: Alright, I found out that both of them have an on-boot frame buffer, but the new Qualcomm one is much larger and more capable. I'll start my porting project there, as that quite literally could be the difference.
Edit2: Oh god the Kconfig errors! They've overtaken the ramparts!
Edit3: It looks like I'm missing a large series of .h files, but other than that, there have been no compilation errors. Also, if you end up where I am, you want MDP31 instead of MDP40, kinda caught me off guard.
Edit4: I like keeping things written down for everyone. Anyways, here's the list of file movements I've done so far for anyone interested, as I need to make sure that if I get a result, it must be duplicatable.
Acer Kernel linux/include/msm_mdp.h must be moved to the same place in a Cyan kernel.
All of Acer Kernel's drivers/video/msm/ must be copied over but the kgsl folder must stay intact.
A blank Kconfig must be made in the same folder.
The Acer Kernel's drivers/video/Kconfig must be copied over. The options you want:
- We have a MDP31 chip
- Not sure yet, but autodetecting the panel is what I've chosen
- MDDP 2.0 doesn't seem to matter, so best left disabled.
After all of this, there seems to be missing a single .h file, which has the function dma_cache_pre_ops() and related in it.
Edit5: I really hope that putting this much detail out doesn't bother anyone... Anyways, the next step fixed most of this, I modified msm_fb.c to have this in the definitions:
Code:
#define pgprot_noncached(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
#define pgprot_writecombine(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
#define pgprot_device(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_DEV_NONSHARED)
#define pgprot_writethroughcache(prot) \
__pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_WRITETHROUGH)
#define pgprot_writebackcache(prot) \
__pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_WRITEBACK)
#define pgprot_writebackwacache(prot) \
__pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_WRITEALLOC)
This does throw some errors cause this isn't supposed to be there, but this is just a temporary hack.
The dma problem disappeared after that (don't know why...) and now I just have to find out why "info" is undefined at line 840 now.
Edit6: It looks like disabling the boot logo (as dumb as that is) gets rid of that error, but it throws a warning that the system needs the logo to be enabled. It's just a temporary measure, plus, I'd love to see a logo-less boot screen.
Edit7: Added a NULL to line 104 in drivers/video/msm/msm_fb_bl.c before
Posted in the Evo section as well. Told some idiots to stay back
I think one thing that we had an issue with before was the fact that it wasn't integrated in the full Qualcomm kernel. There could have been other code in there it depended on that we didn't pull. We need to clone the whole CodeAurora kernel repo (.32) and build it and see if it boots.
Then there's the Liquid E stuff. And the new FroYo Sense kernel is a .32, so once we get HTC's source it may be able to be implemented there too. I don't think any of the Nexus kernels that are around are .32 so that could be why it wouldn't build.
Just my $.02
I have been using
http://tomoyo.sourceforge.jp/cgi-bin/lxr/source/drivers/staging/msm/mdp.c as a base reference for my work and for bugfixes, as the staging area has the driver implemented as a .35. I'm going to try something, maybe downloading the whole source from this one repo and using the config I got, maybe it will spare me the issue. It's so clean, so error free, I'm liking it.
Edit9: Alright, downloaded 2.6.35 kernel, copy-pasted staging driver, got rid of all the errors prior.