[Mod] [CM7] Status Bar With JB Header Brightness Slider & Transparent Theme 14/03/14

Search This thread

TheFixItMan

Senior Member
Jul 8, 2012
7,844
4,052
London
[Mod] [CM7] Status Bar With JB Header Brightness Slider & Transparent Theme 14/03/14

Status Bar With JB Header Brightness Slider And Transparent Theme For CM7​




This Mod Is For Any CM7 Only
If You Require The Stock Version Go Here
If You Require The AOSP Version Go Here

My Other CM7 Theme Can Be Found - Here


Take Note Of The Following
Anyone is free to use and develop this with the following conditions
you do not mirror the download link or add any ads to my download link on blog sites
post the link to this thread if you blog this
credit me



gl0zg.jpg
5l1n.jpg





Install Instructions
Step 1 - Flash Status Bar
Go into CWM
Make A Nandroid Backup In Case Your Status Bar Goes Walkies For Some Strange Reason
Mount System Data Cache Sdcard (on bieltv.3 kernel unmount and remount system at least twice)
Install Zip From SD
Select Zip
Restart

Note - If you still cant work out how to flash it on bieltv.3 kernel just flash percys kernel and then flash the zip then flash back to bieltv.3 kernel

Step 2 - Set Transparent Theme
Goto Phone Settings
Select ADWLauncher
System Preferences
Disable (untick) Wallpaper Hack
Press home key
Open dock
Open Theme Chooser app
Select MarcusSmithTransTheme
Select Apply
Select Apply Anyway
Done - Your status bar is now transparent



Changelog
V1
Initial release
Added/edited smali/xml files to SystemUI.apk
Added JB header
Added brightness slider
Added transparent theme

V1.1
Changed updater script to make it flashable on bieltv.3 kernel

V1.2
Resigned SystemUI.apk with a platform key - now fully works with bieltv.3 rom/kernel



Downloads
For Galaxy Y GT-S5360 - Transparent Theme V1.2




Do Not Post Things Like
Will this work on xyz rom - This is for any CM7 Only!
Will this work on stock rom or AOSP - NO!! See link at the top of the thread for stock/AOSP version

To make it clear - this is for any CM7 only!


credits
UOT
petrukgrinder
 
Last edited:

TheFixItMan

Senior Member
Jul 8, 2012
7,844
4,052
London
doesn't work with. beilt cm7 totoro.

yes it does cause iv tested it and using it
like I said in the rom thread you may not be able to flash things with his kernel due to mount points

if you want to flash someting switch to percys kernel first flash this then flash back to his kernel if you have problems with flashing the zip!!



also saying something doesnt work is not very helpful - either provide a full description of the problem with screenshots if possible or i'll predend it never happend
 
Last edited:

TheFixItMan

Senior Member
Jul 8, 2012
7,844
4,052
London
will this affect my current theme if i apply this?

if you just flash the zip you will get the status bar without changing the theme as in colours
if you want the status bar to be transparent you need to apply my theme which is the androidian theme just with the status bar transparent

you can make your own theme if you wish to or apply any other theme in theme chooser but the status bar will only become transparent if the theme contains transparency


my zip contains two elements

1. a patched system ui which contains modded smali to enable transparency and the layout you see in screenshot
2 a theme chooser theme apk which is based on the androidian theme which contains the transparency
 

TheFixItMan

Senior Member
Jul 8, 2012
7,844
4,052
London
Sir marcus,
I already mount the system thrice but it never succed -_-
Should i try manually put the apk ?

you can do - I flashed it used percys kernel


just extract both the systemui and the theme apks and push to system and set permissions to rw-r-r


edit - i'll look into changing the updater script to work with bieltv.3 kernel

update - iv changed the updater script and its now flashable on bieltv.3 kernel - its now available on the 1st post
 
Last edited:
  • Like
Reactions: Mranggapo

TheFixItMan

Senior Member
Jul 8, 2012
7,844
4,052
London
version 1.1 with changed updater script so it is flashable on bieltv.3 is now on the 1st post

remember to unmount and mount system at least twice
 
  • Like
Reactions: Mranggapo

TheFixItMan

Senior Member
Jul 8, 2012
7,844
4,052
London
Still doesnt work -_-, i flash mount and remount it thrice

it did with my testing - I will delete it and reflash it and confirm


edit - I have retested version 1.1 on bieltv.3 kernel and bieltv.3 cm7 and it works and flashes fine
make sure EVERYTHING is mounted and you unmounted and remount system at least twice

it does work



If you still cant work out how to flash it on bieltv.3 kernel just unzip it and push both apks to system/app and set permission to rw-r-r
 
Last edited:

Mranggapo

Senior Member
Mar 31, 2013
965
195
Jakarta
it did with my testing - I will delete it and reflash it and confirm


edit - I have retested version 1.1 on bieltv.3 kernel and bieltv.3 cm7 and it works and flashes fine
make sure EVERYTHING is mounted and you unmounted and remount system at least twice

it does work



If you still cant work out how to flash it on bieltv.3 kernel just unzip it and push both apks to system/app and set permission to rw-r-r

When i manually push, the statusbar gone
 

TheFixItMan

Senior Member
Jul 8, 2012
7,844
4,052
London
When i manually push, the statusbar gone

Dunno what you are doing then cause it works perfectly well on mine

I think with my statusbars you do have to flash them
if you are having trouble flashing them switch to percys kernel reboot to recovery flash the zip and then flash back to bieltv.3 kernel

put your orig status bar back first so you get your status bar back before attempting to reflash it
 
Last edited:

TheFixItMan

Senior Member
Jul 8, 2012
7,844
4,052
London
Check this marcus it also wont work for me check logcat.
genyru9e.jpg


---------- Post added at 07:59 PM ---------- Previous post was at 07:51 PM ----------

HERE IS THE SOLUTION .
Use This SystemUI
https://www.dropbox.com/s/oph7daqhboichnm/SystemUI.apk

oh certificate of entry - what if you just resign it with a platform key? hang on i'll resign it and you can test it

m using bieltv.3 rom bieltv.3 kernel and it flashes totally fine and im using it so I still havent worked out why its not working with others

yes the systemui is from percys build because I created it a while ago but it shouldnt matter - so im a little confused

and it needs to be flash when you are on the orig status bar - if you flashed a modded one before it wont work
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 4
    [Mod] [CM7] Status Bar With JB Header Brightness Slider & Transparent Theme 14/03/14

    Status Bar With JB Header Brightness Slider And Transparent Theme For CM7​




    This Mod Is For Any CM7 Only
    If You Require The Stock Version Go Here
    If You Require The AOSP Version Go Here

    My Other CM7 Theme Can Be Found - Here


    Take Note Of The Following
    Anyone is free to use and develop this with the following conditions
    you do not mirror the download link or add any ads to my download link on blog sites
    post the link to this thread if you blog this
    credit me



    gl0zg.jpg
    5l1n.jpg





    Install Instructions
    Step 1 - Flash Status Bar
    Go into CWM
    Make A Nandroid Backup In Case Your Status Bar Goes Walkies For Some Strange Reason
    Mount System Data Cache Sdcard (on bieltv.3 kernel unmount and remount system at least twice)
    Install Zip From SD
    Select Zip
    Restart

    Note - If you still cant work out how to flash it on bieltv.3 kernel just flash percys kernel and then flash the zip then flash back to bieltv.3 kernel

    Step 2 - Set Transparent Theme
    Goto Phone Settings
    Select ADWLauncher
    System Preferences
    Disable (untick) Wallpaper Hack
    Press home key
    Open dock
    Open Theme Chooser app
    Select MarcusSmithTransTheme
    Select Apply
    Select Apply Anyway
    Done - Your status bar is now transparent



    Changelog
    V1
    Initial release
    Added/edited smali/xml files to SystemUI.apk
    Added JB header
    Added brightness slider
    Added transparent theme

    V1.1
    Changed updater script to make it flashable on bieltv.3 kernel

    V1.2
    Resigned SystemUI.apk with a platform key - now fully works with bieltv.3 rom/kernel



    Downloads
    For Galaxy Y GT-S5360 - Transparent Theme V1.2




    Do Not Post Things Like
    Will this work on xyz rom - This is for any CM7 Only!
    Will this work on stock rom or AOSP - NO!! See link at the top of the thread for stock/AOSP version

    To make it clear - this is for any CM7 only!


    credits
    UOT
    petrukgrinder
    1
    I was waiting for this :) thanks marcus :good:
    1
    Sir marcus,
    I already mount the system thrice but it never succed -_-
    Should i try manually put the apk ?

    you can do - I flashed it used percys kernel


    just extract both the systemui and the theme apks and push to system and set permissions to rw-r-r


    edit - i'll look into changing the updater script to work with bieltv.3 kernel

    update - iv changed the updater script and its now flashable on bieltv.3 kernel - its now available on the 1st post
    1
    version 1.1 with changed updater script so it is flashable on bieltv.3 is now on the 1st post

    remember to unmount and mount system at least twice
    1
    Check this marcus it also wont work for me check logcat.
    genyru9e.jpg


    ---------- Post added at 07:59 PM ---------- Previous post was at 07:51 PM ----------

    HERE IS THE SOLUTION .
    Use This SystemUI
    https://www.dropbox.com/s/oph7daqhboichnm/SystemUI.apk