By the way, if you've already updated, then you don't need to reapply this update. The build.prop version number is exactly the same as the OTA update and the only difference between this build and the OTA is that they are built 43 minutes apart.
Full 3.1 Update (Not OTA) - Acer_A500_4.010.38_COM_GEN1
- Thread starter vache
- Start date
-
- Tags
- development
just instaled this with CWM, now when i try to boot to recovery with vol+ and power there is only picture with droid and note of exclamation. it mean i have no recovery now ?
everythink working good, but im little scared with no recovery.
everythink working good, but im little scared with no recovery.
Merci, téléchargement effectué, chargement de la batterie et backup avant mise à jour. J'avais fais l'update Acer_500_1.139.05_1.141.05_COM_GEN1 et il me tardait d'avoir le 3.1.
Merci Monsieur, et tout mon respect
ps. : j'aurais pu le dire en anglais mais c'est tellement sympa d'avoir un compatriote aussi dévoué
Merci Monsieur, et tout mon respect
ps. : j'aurais pu le dire en anglais mais c'est tellement sympa d'avoir un compatriote aussi dévoué
I am on the 3.1 Stock "Chinese" version rooted......
the version of this thread works for me?
sorry for my english
the version of this thread works for me?
sorry for my english
well,
I installed it over a custom rom, so should work you too also.
I used it with CWM.
Copied the update.zip to sdcard, booted into recovery and flashed the update.zip, thats it, nothing else.
everything is working fine.
Thanks for the update!
I installed it over a custom rom, so should work you too also.
I used it with CWM.
Copied the update.zip to sdcard, booted into recovery and flashed the update.zip, thats it, nothing else.
everything is working fine.
Thanks for the update!
ota dont work on my iconia
Hello everyone. My ota will not work. I have version 3.0.1 - kernel 2.6.36.3 - Build Acer_A500_1.139.05_COM_GEN1. I live in Italy. I can install the attached file in first post?
Hello everyone. My ota will not work. I have version 3.0.1 - kernel 2.6.36.3 - Build Acer_A500_1.139.05_COM_GEN1. I live in Italy. I can install the attached file in first post?
hello siriokeliang
I am almost in the same case 1.141.05 and before 1.39.05, I shall say that to you in a moment because in 5 mn I begin to do the update
update done.... rebooot i cross my fingers
I am almost in the same case 1.141.05 and before 1.39.05, I shall say that to you in a moment because in 5 mn I begin to do the update
update done.... rebooot i cross my fingers
Last edited:
Mine was not rooted, but you can unroot, i read also that many had done update with rooted tab, some loose the root others not
Now i have 3.1, i am going to test, and after root
After some tests, the only issue : I cant see my hard disks, before with ntfs mount (root) i saw them
Playing video HD a little better, but ....
Now i have 3.1, i am going to test, and after root
After some tests, the only issue : I cant see my hard disks, before with ntfs mount (root) i saw them
Playing video HD a little better, but ....
Last edited:
It means you have the stock recovery now. I imagine it overwrites CWM if you had it installed. If you want CWM back, reflash it with Acer Recovery Installer.
Vache: great upload! Now we have a single method to get back to stock regardless of what recovery is installed. Fantastic!
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
37Enjoy this full version :
Acer_A500_4.010.22_COM_GEN1 : http://www.multiupload.com/ZHWIIPAAD4
Acer_A500_4.010.38_COM_GEN1 : http://vache-android.com/v1/download.php?fileID=75
No more issue about wrong SHA1
Thx to my source for this.
Edit : You can flash it with stock Acer recovery. Put the update.zip on your SDCard without renaming the filename, and reboot into recovery with Power / Vol+.11
