[APP] WiMoSpeed: [2011-09-20] V1.09

Search This thread

iwfratz

Senior Member
Oct 14, 2008
143
248
If you need any shipped ROMs, most are available at the following link for many different devices.

Thank you for the link, that is already my source for the ROMs


How soon we can expect support for Raphael?

Here is my actual to-do-list:

  1. solving Blackstone problem (good news: I hope that this is almost done).
  2. solving problem with radio 2.25.02WVL
  3. add support for a few Imagio ROMs
  4. support for Raphael / Fuze
  5. support for Diamond

I am working on this in my spare time, beside my job, my mate and some other interest. So I can not give you a time table, sorry.

Would be version for SE X1:?

The HTC ROMs are counstructed alike, so adding support for these ROMs is not very difficult. I already had a look into a Toshiba Portege ROM: it has a completly different built-up. So I will not promise support for non-HTC devices. We will see.
 

powinmo

Senior Member
May 5, 2010
65
15
I am working on this in my spare time, beside my job, my mate and some other interest. So I can not give you a time table, sorry.

...

So I will not promise support for non-HTC devices. We will see.

Personally I am grateful for all you have done so far with your spare time... with OCT and now WiMoSpeed.

The developer in me, thinking out loud, would probably hint at you putting some of those quotes as the very first lines of post #1... on the off chance it spares you from having constantly repeat the same statements :)
 

tsalta

Senior Member
Dec 25, 2008
2,459
721
London
I want to Overclock my Backstone too but wit WiMoSpeed when im doing it after sleep the device is ot the HALF cpu performance by itself i hope soon this will be fixet and i can overclock without problem
Thanks
 
  • Like
Reactions: dorimanx

scatman_ii

Member
Jan 6, 2010
7
0
The HTC ROMs are counstructed alike, so adding support for these ROMs is not very difficult. I already had a look into a Toshiba Portege ROM: it has a completly different built-up. So I will not promise support for non-HTC devices. We will see.

Correct me if I am wrong, but since the Xperia X1 was built by HTC it might be easier than adding support for the Toshiba :)

Happy new year everyone!
 
Last edited:

endeavour3d

Member
Jun 29, 2009
5
0
I have a T-Mobile branded Touch Pro2 and it's giving me both errors (Radio and OEMXIP).

ROM Version: 1.20.531.4 (51986) WWE

Radio Version: 3.45.25.14

I do not have a link to my rom presently, I'll look around and see if someone ripped it.
 
Last edited:
S

SaAlWe

Guest
I'm using the ROM on Energy GERMAN and have the same problem with the cpu frequency, so I tried following the instructions to leave. but it works well I guess not because the file paths are different in the German and the files are not found ...

can anyone help or do I just wait for the new version, the so described the problem with the cpu frequency halving the HTC TOUCH HD


mfg saalwe
 

dorimanx

Senior Member
Feb 20, 2010
12,716
93,528
TERA Prime.
www.dorimanx.com
I'm using the ROM on Energy GERMAN and have the same problem with the cpu frequency, so I tried following the instructions to leave. but it works well I guess not because the file paths are different in the German and the files are not found ...

can anyone help or do I just wait for the new version, the so described the problem with the cpu frequency halving the HTC TOUCH HD


mfg saalwe

Hi,

For now any one who using HTC HD phone waiting for CREATOR to find this annoying bug and fix it :)

So join us, and wait with us :rolleyes:

Dear Creator we are waiting for your application update every day!

Thanks for your time that you spend!
 

elander

Senior Member
Oct 23, 2009
213
39
Hello, thanks for this awesome app, it really helps bearing with the lag in winmo on my sprint tp2, I have it set rock steady @ 729mhz not bad for a phone originally thought to run @528mhz, anyways I noticed something a little odd (and imho a little dangerous) is that on the little box where you set your desired multiplier number, if one tries to reach zero, in order to go back to stock speed (I know most people wont do it daily) if you are no careful enough and after reaching zero you hit the down arrow again it jumps fromzero to 63 or something like that, which gets the proccesor to run @ 1200mhz+ which could probably damage something, so I wonder, would it be possible to lock the "little box" so it won´t go from the lowest to the highest setting? you know, as a safety measure? I know most people know what the are doing here, but anyone can make a mistake. thanks, by the way I´m using version 1.02
 

Viper89

Senior Member
Oct 6, 2009
513
35
New York
@ iwfratz thanks for you hard work on this project. Unfortunately it coulden't find my rom or radio.My phone Sony X1i
OS version 5.2.28244
ROM version Nov.12.2010
Radio Version: 1.14.25.55

I don't have a link.
 

joefrank

Senior Member
Jul 12, 2009
1,462
1,502
37
Quebradillas
Thanks bro running my topaz at 710mhz speeds. No problems here. This app is what I was looking for. Although oct was great too. Im running energy and loving it.
 

lesscro

Senior Member
Jul 16, 2007
4,486
2,266
Paris
Did you planned to support more Qualcomm CPU like Snapdragon ?

Other great work on old CPU, it give a second life... :p
 

iwfratz

Senior Member
Oct 14, 2008
143
248
Energy Rom, 21916 with Sense 2.1 on Touch Pro: after a warning the program doesn't start.. :(

read post #1
(hint: Touch Pro == raphael)

@ iwfratz thanks for you hard work on this project. Unfortunately it coulden't find my rom or radio.My phone Sony X1i
OS version 5.2.28244
ROM version Nov.12.2010
Radio Version: 1.14.25.55

I don't have a link.

read post #1.
(hint: read section "limitations")

Do you think that I should have a link to your ROM without having such a device ???
 

Top Liked Posts

  • There are no posts matching your filters.
  • 81
    CAUTION !!!
    - USE THIS TOOL AT YOUR OWN RISK !!
    - Overclocking your cpu may damage your device.
    - Before autostarting the app be sure that your device will not hang.
    - backup is always recommended !!


    DESCRIPTION :
    WiMoSpeed lets you change the CPU-speed. In opposite to other tools, even to the predecessor OverClockTool (OCT), it manipulates the values WM uses for clock control. So it works reliable on battery and AC without any scripting or active components.


    USAGE :
    - WiMoSpeed needs .NET CF 3.5
    - Download and install the CAB
    - Start WiMoSpeed.exe. If it reports that it cannot identify your ROM: read LIMITATIONS/PROBLEMS
    - Select Speed
    - Set Speed
    - Exit WiMoSpeed.exe
    - Your device still runs with speed you set


    Auto start WiMoSpeed to desired speed:
    Note: one advantage to installing WiMoSpeed to storage card is that if device ever won't boot at new speed, the card can be removed and the device will boot at original speed.

    1. MOST IMPORTANT: Ensure WinMoSpeed will function safely on your device at desired speed by using it for several days while setting the speed manually.
    2. Run WiMoSpeed, set to desired speed, click "create link with current settings". This will create a lnk file under the install directory, usually "/Program Files/WiMoSpeed" or "/Storage Card/Program Files/WiMoSpeed".
    3. Copy that lnk file to the "/Windows/Start Up" folder.
    4. Reboot device.
    5. Run WiMoSpeed to verify "current CPU speed" is correct.

    LIMITATIONS / PROBLEMS
    I am working on this in my spare time, beside my job, my mate and some other interest. I own a Rhodium-device only, so I can not reproduce errors on other devices and debugging is very difficult and time-consuming. Be patient.

    WiMoSpeed supports Qualcomm MSM7200 (and compatible) and is actually limited to ROMs of
    • Rhodium,
    • RhodiumW
    • Topaz
    • Blackstone
    • Whitestone / Imagio
    • Raphael / Fuze
    • Diamond
    • Kovsky / Xperia
    • Quartz
    • Pure
    • test (!) support for Jade, Panther, Mega and Rose

    !!! If you have a device listed above and WiMoSpeed could not identify your ROM please post here what part of your ROM WiMoSpeed couldn't identify (OEMXIP and / or RADIO-ROM) and include a download-link of your ROM (OS, RADIO) !!! Otherwise I will ignore your post. Thank you.

    If you are going to report an error please include the ROM identification of WiMoSpeed shown in the GUI (e.g. OS "Rhod016 / PLL2", Radio "4.49.25.91")

    TECHNIQUE
    Basically WiMoSpeed is hardware-independent, because it lets WM change clock speed. But I couldn't get WM to switch the clock reliable on request so WiMoSpeed had to switch the clock registers itself on setting a new speed.
    Therefore WiMoSpeed depends on CPU-hardware, RADIO- and OS-ROM.

    Raising or lowering cpu speed didn't change battery drain or device temperature noticeable. So there isn't dynamic clocking in WiMoSpeed, but WM is still controlling and changing cpu-speed on battery.


    thanks to
    -all donators for the support
    -eboelzner for Sense UI SDK
    -dmvandijk for the icon
    -the internet ;)

    TODO-LIST
    • ?

    Support for
    • non-HTC MSM7200/7201
    • non-MSM7200/7201
    devices is uncertain.

    Please do not mirror WiMoSpeed !

    Version 1.09
    - added support for more OEMXIPs (1xRhodium, 1xTopaz, 1xRaphael)
    - added support for more radios (1.11.30F, 3.54.25.25, 1.20.OliNex)
    - PINVOKE error should be solved (moved to another compiler)

    - test (!) support for Jade, Panther, Mega, Rose and Radios

    Version 1.08
    - added support for more OEMXIPs (1 x Diamond, 1 x Blackstone)
    - added support for more RADIOs (0.93.25.NS16, 1.02.25.32, 1.10.25.18, 1.11.25.71, 1.11.25.76)

    Version 1.07 (3.233 views)
    - set os-versions in CAB-Information-File, maybe it solves installation problems
    - added support for more OEMXIPs (1 x Topaz, 1 x Blackstone)
    - added support for more RADIOs (1.02.25.28)

    Version 1.06 (6.000 views)
    - checks ROM-identification at startup
    - support for Pure
    - added support for more OEMXIPs
    - added support for more RADIOs

    Version 1.05
    - support for Quartz
    - added support for more OEMXIPs
    - added support for more RADIOs

    Version 1.04
    - blackstone problem should be solved now (tested by tsalta with Blac016 / 1.17.25.09)
    - added support for more ROMs
    - support for Raphael / Fuze, Diamond, Kovsky / Xperia
    - GUI shows ROM identification

    Version 1.03
    - blackstone problem (speed cut in half after sleep) should be solved
    - added support for more ROMs
    - changes in GUI (you have to create your links again; old ones starts the GUI only)

    Version 1.02
    - added support for more devices
    - added support for more ROMs

    Version 1.01
    - added support for more OS-ROMs
    - added support for more radio-ROM
    - new function: restore default speed (528 MHz)

    Version 1.00
    - Initial release
    - Rhodium, RhodiumW
    17
    radios
    • 0.93.25.NS16
    • 1.00.25.03, 1.00.25.05, 1.00.25.07, 1.00.25.08, 1.00.25.16
    • 1.02.25.11, 1.02.25.19, 1.02.25.28, 1.02.25.32
    • 1.02.35.31
    • 1.08.25.08, 1.08.25.20
    • 1.09.25.07, 1.09.25.08, 1.09.25.14, 1.09.25.23, 1.09.25.23M, 1.09.25.35
    • 1.10.25.18, 1.10.25.25
    • 1.11.25.01, 1.11.25.71, , 1.11.25.76, 1.11.30F
    • 1.12.25.16, 1.12.25.16D3, 1.12.25.16DE, 1.12.25.19
    • 1.13.25.24, 1.13.25.55
    • 1.14.25.05, 1.14.25.24, 1.14.25.35, 1.14.25.55
    • 1.15.25.14, 1.15.25.55
    • 1.16.25.48
    • 1.17.25.09
    • 1.20.OliNex
    • 1.40.00WF
    • 1.87.00WV
    • 1.88.07WV
    • 1.92.00WV
    • 1.96.00WF
    • 2.05.00WV, 2.05.75WVL
    • 2.18.00WV, 2.18.02WV
    • 2.21.00WV
    • 2.23.00WV
    • 2.25.00WVL, 2.25.02.WVL
    • 2.30.00WV
    • 2.32.00WF, 2.32.00WU
    • 2.35.00WV
    • 2.37.00WV
    • 2.49.25.204
    • 3.43.25.19, 3.43.25.19DE
    • 3.44.25.27
    • 3.45.25.14, 3.45.25.21
    • 3.46.25.18, 3.46.25.30
    • 3.54.25.25
    • 4.46.25.24
    • 4.47.25.24
    • 4.48.25.20
    • 4.49.25.05, 4.49.25.17, 4.49.25.57, 4.49.25.77, 4.49.25.88, 4.49.25.91, 4.49.25.94, 4.49.25.95
    • 1.96.10WU
    • 2.23.00WU
    • 2.32.00WU
    8
    reserved for the OP
    7
    new version released

    • set os-versions in CAB-Information-File, maybe it solves installation problems
    • added support for more OEMXIPs (1 x Topaz, 1 x Blackstone)
    • added support for more RADIOs (1.02.25.28)
    6
    new version released

    WiMoSpeed V1.05
    • support for Quartz (3 OEMXIP)
    • added support for more OEMXIPs (5 x Raphael, 5 x Diamond, 1 x Kovsky)
    • added support for more RADIOs (1.96.10.WU, 1.14.25.35, 1.02.35.31, 1.08.25.08, 1.15.25.55, 1.02.25.31, 1.12.25.19)

    Hope, that I got all ROM-links posted here, there were quite a lot. If I missed one, I am sorry. Please post again.