Thank you so much,Reallyyy indebted,Permanent CWM was a dream that faded away.But you came brought light to us.
Kernel didn't boot, but CWM remained.The best thing I can flash stock from CWM.
Please clarify sir. You flashed the new kernel then installed the ext4.zip but it did not boot so you reverted back to stock kernel and the cwm remained and is working with stock kernel now? Is that what happened sir? If so its very nice!
Sent from my GT-S5360 using xda premium
Chaitanya , good comment, The kernel,ext4 didnt boot in me,I will try odin,I have used Faqbly flasher 2.
Root privilege is gone, SU has force close in updating binary,Titanium back has no root excess.Gonna flash a stock Rom.
Root privilege is gone, SU has force close in updating binary,Titanium back has no root excess.Gonna flash a stock Rom.
@maroc
I tried to flash your latest build in creeds rom and DXLB1 Firmware but still, stuck at boot logo.,,but the CWM working fine.,I used Mai77, Faqbly and Odin method but the same result., hope it will fix soon sire,. btw, you're awesome Sir )
yeah i 2 tried but no luck newayz SU BINARIES are outdated and getting error while updating this is probably the reason for not getting rooting privilege and secondly i 2 flashed fresh stock rom as i lost baseband aftr flashing dis and yeah i know it wont brick as i ma self posted in ma previous post entire stuff abt dis kernel
@maroc
I tried to flash your latest build in creeds rom and DXLB1 Firmware but still, stuck at boot logo.,,but the CWM working fine.,I used Mai77, Faqbly and Odin method but the same result., hope it will fix soon sire,. btw, you're awesome Sir )
Have you solve it by flashing stock?
---------- Post added at 01:39 PM ---------- Previous post was at 01:37 PM ----------
Check your root status?
well i guess u shud plug in ur phone 2 ur pc via USB to make ur phone boot i cant really understand dis logic but it boots wid out any fuss if we follow dis dat is flash kernel and allow ur phone connected 2 pc via USB and it boots in guess USB some how bring dat speed to phone seems WEIRD but dis is how i booted in and when tried wid out connecting USB itz like i have been waiting for ages 2 boot
just give dis a try it wud boot
Swap Support.
Some Bug Fixes.
CPU Spy App Fix.
Game-Port Modules.
Graphic Engine Driver.
Security Patches Added.
TUN/TAP, Virtual Adapter.
Added USB CORE Support.
HID, EHCI, OHCI, Support.
VibeTunz (TM) Technology.
MERRUK Tempfs for SU Binary.
EXT2/EXT3 & EXT4/JBD2 support.
SD-EXT Support, System & Recovery.
CIFS Support. (Mount Shared Folders).
NETFILTER Compatibility with DROIDWAL.
Recouvery in Read/Write mode & [ADB Root].
Added IO Scheduler. (Deadline, CFQ, VR, SIO).
BLMUNLOCK Added, & a Script to run it at boot.
INIT.D Support & Auto Create init.d in /system/etc.
BusyBox Support PreInstalled (Busybox binary in /sbin).
Root Support [ADB Root] & PreInstalled (SU binary in /sbin).
Added MFC, (MULTI FORMAT CODEC) Firmware From Samsung.
Multi-language Module Support For UTF-8 on CIFS Mount Shares.
/Cache and /Data, Can be mounted as EXT4. (/System Need's Fixes).
Add The Permanent Modded / Fixed CloclWorkMode Recovery. (V.5.8.0.2).
Mount SDCARD WITH EXT4 FS Supported (You Need to Format it With EXT4).
New J4FS SUPPORT. (We Can Mode it to have our new optimized j4fs rw filesystem).
Modules for VPN/IPSec Support. (IPsec AH, IPsec user configuration interface, IP Tunneling, )
Added CPU Governor Feature. (SmartassV2, Conservative, Ondemand, Powersave & Userspace, etc...) (Not All of them for now)
------------------------
DEBUG SCRIPTS ADDED FOR SYSTEM & RECOVERY.
FIXES SCRIPTS ADDED FOR SYSTEM & RECOVERY.
IMPORTANT MODULES LOAD'S NOW AT BOOT.
Plus A Lot of Other Improvements & Fixes.
USB OTG Driver.
A2SD Complete Support.
DROIDWALL App Fully Working.
Overclock/Undervolt Tricks Support.
Modded ZYGOTE Service for Detailed Catlog.
Increase Internal Memory UP, /Data now is on SDCard.
Versions:
Test Kernel
Alpha v0.1
Alpha v0.5.2
Alpha v.0.5.7
V0.6 RC 80
V0.7 RC 10
V0.7.50 RC 10
V0.7.50 RC 20
V0.8.50 RC 10
V.1.0_Beta_1
V 1.0.0
V 1.0.1
V 1.0.5 [For Flashing via mai77 method here's the boot.img ONLY]
V 1.0.8 [For Flashing via mai77 method here's the boot.img ONLY This Kernel Needs the 1.0.8 System]
MerrukTechnology 2.0
Merruk 2.5(boot.img only)
Download the following and place to the Root Of SD card
CWM
KernelUpdate.zip
Ext4
MerrukTechnology v2.0 Pre-Final(boot.img ONLY)
System 1.0.8
(Note : For system 1.0.8 it contains "system" folder, extract that folder and place in root of SD card)
Now we are all set
1. Turn off phone and boot into CWM
(Note: To boot into CWM press Vol Up, Home, and Power at the same time and in the stock recovery choose update from zip and select the CWM.zip)
2. Once in the CWM recovery, simply choose install from zip and select KernelUpdate.zip
(Note : Kernel Update.zip looks for a boot.img file in SD card and flashes it)
3. After successful kernel up press power to return to CWM
4. Press Reboot now, and your kernel is updated
5. Reboot twice and it will automatically delete the system folder in SD card
6. Repeat step 1 and select install from zip, this time choose the Ext4.zip
7. Press power to return to CWM and Press Reboot now
INSTRUCTIONS :
Short PDA Flashing Guide
- download the .tar file
- install Kies, or Samsung driver pack
- download Odin3 1.84 or 1.85 (download links above)
- stop Kies
- stop all active ADB sessions
- start odin
- power off Your SGY
- boot into download mode
- Press Vol Down, Home, and Power at the same time
- When (about 5 sec) Warning screen appears, release Volume Down and Power, then (a bit later) Home
- press Vol Up (You'll get Odin mode screen)
- in the PDA field, browse for the kernel tar
- leave all other fields and checkboxes default!
- connect your phone, You must see yellow 0:[COMxx] in the first ID:COM and "Added" in the message box
- Start flashing by the START button.
- flashing will start immediately, see the progress in the message box, and progress bar on the phone
- Wait 1-3 minutes, until green PASS! in the upper left
- SGY will reboot, leave it as is for 2-5 minutes until startup finishes
If Ever Problem Occurs, Just Flash Back To These Kernels
Stock XXLA2
Stock DXLA1
Terma Kernel
Test Kernel
How To Get Logcat For Windows User
Here's how to do a logcat, providing you have installed android sdk.
1. Turn off your phone (if stuck, just remove the battery).
2. At your command prompt, do "adb logcat > logresult.txt".
3. Plug your phone to your usb and power it.
4. After at least 1-2 minutes or until the phone has fully booted up, terminate your logcat session (ctrl+c).
By then you have created a logresult.txt which contains your logcat entries. PM your results to the devs.
---------------------------Sir Maroc,I Dont have Use System 1.0.8 to v2,its make any issue?
Amazing PowerSave Governor ;P
---------------------------
---------------------------I'm not using it, I just flashed the kernel using faqbly method and that's it. Not sure about custom roms though