[PORT] TWRP 2.5.0.0 For Micromax A116 Touch Recovery + Auto Root

Search This thread
By:
Advanced…
kumar abhishek

kumar abhishek

Senior Member
Jan 6, 2012
1,194
1,980
27
Dhuri, Punjab

Using Flash Tools to Flash TWRP Recovery to A116​
​


Requirements:
TWRP Rewcovery
Flash Tool
A computer
A Micromax A116 (obviously)


Steps:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with TWRP recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.


Auto Root Installation:-
This version has the built-in Auto-Root feature for non-rooted devices...

Steps :
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:


Downloads :
TWRP Rrecovery :
http://d-h.st/IsY

Kernel Sources :
http://yadi.sk/d/fmIOi_ee6ADpi

MT6589 Scatter File :
https://www.dropbox.com/s/p0oc0769t5igt8s/MT6589_Android_scatter_emmc.txt

SP Flsh tools:
http://www.mediafire.com/?7ccl2tw67tklxdk

Drivers:
http://www.mediafire.com/download.php?nv96xclhjmaiclu

64bit drivers:
http://xdaforums.com/showthread.php?t=2206421

TWRP is tested working. :)

Changelog :

[23/05/2013]
1. TWRP Updated to 2.5.0.0
2. Auto Root Fixed

Credits:
TWRP Tool- yuweng
Testing And Screenshots- Mohammad Abdul Sajid, Vijay
Press Thanks button if I helped!! :D
 

Attachments

  • DSC_2647.jpg
    DSC_2647.jpg
    243.3 KB · Views: 5,185
  • DSC_2649.jpg
    DSC_2649.jpg
    242.7 KB · Views: 4,440
  • DSC_2654.jpg
    DSC_2654.jpg
    263.2 KB · Views: 3,925
  • DSC_2655.jpg
    DSC_2655.jpg
    241.3 KB · Views: 3,636
  • DSC_2664.jpg
    DSC_2664.jpg
    245 KB · Views: 3,171
  • DSC_2660.jpg
    DSC_2660.jpg
    245 KB · Views: 2,774
  • DSC_2661.jpg
    DSC_2661.jpg
    246.9 KB · Views: 2,883
  • DSC_2662.jpg
    DSC_2662.jpg
    251.1 KB · Views: 2,569
Last edited:
  • Like
Reactions: minealex2244, jackreaper, Tizon and 27 others
haree

haree

Senior Member
Sep 13, 2008
4,021
720
CHENNAI
reboot problem

hi
i seem to be having some problem rebooting system does it take some time to reboot i waited for some time it did not reboot and then i pulled out the battery and booted the phone kindly advise on the same
thanks in advance:good::laugh:
 
peekeje

peekeje

Senior Member
Jun 14, 2012
300
37
Singapore
www.peekeje.com
After installing TWRP recovery successfully........it doesnt happen automatically when i reboot the phone as below.
Then i tried to install the SuperSU and BIN files thru Recovery, and SuperSu can be found in the App drawer. but the Phone is not rooted when i check thru rootchecker. and even Titanium backup or any other app cant work which require root access.

Pls tell me, how to successfully ROOT the phone. Even SuperSU installed, it cant update the binary.


1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:


kumar abhishek said:

Using Flash Tools to Flash TWRP Recovery to A116





Steps:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with TWRP recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.


Auto Root Installation:-
This version has the built-in Auto-Root feature for non-rooted devices...
Steps
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:





TWRP is tested working. :)
[/COLOR]

Credits:
TWRP Tool- yuweng
Testing And Screenshots- Mohammad Abdul Sajid, Manoj Nair
Uploading- Kushal Gupta
Press Thanks button if I helped!! :D
Click to expand...
Click to collapse
 
kumar abhishek

kumar abhishek

Senior Member
Jan 6, 2012
1,194
1,980
27
Dhuri, Punjab
peekeje said:
After installing TWRP recovery successfully........it doesnt happen automatically when i reboot the phone as below.
Then i tried to install the SuperSU and BIN files thru Recovery, and SuperSu can be found in the App drawer. but the Phone is not rooted when i check thru rootchecker. and even Titanium backup or any other app cant work which require root access.

Pls tell me, how to successfully ROOT the phone. Even SuperSU installed, it cant update the binary.


1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
Click to expand...
Click to collapse

First of all please dont quote whole post.
It has been confirmed that there is some problem with autoroot
Pls follow root procedure posted in cwm thread

Sent from my C6502 using Tapatalk 2
 
  • Like
Reactions: hackorgan
peekeje

peekeje

Senior Member
Jun 14, 2012
300
37
Singapore
www.peekeje.com
kumar abhishek said:
First of all please dont quote whole post.
It has been confirmed that there is some problem with autoroot
Pls follow root procedure posted in cwm thread

Sent from my C6502 using Tapatalk 2
Click to expand...
Click to collapse

Sorry to quote full.
I tried also the CWM procedure... and flashed both the SU and BIn files. and after reboot, its there in the app drawer. And when i open the SU, and try to update binary also, it fails.
Also, root checker says, Not root access.
 
melander

melander

Senior Member
Dec 31, 2011
441
123
Parañaque
@kumar abhishek
how were you able to keep the size of this twrp recovery to just within 6mb?.
from what i have checked on the porting tool of yuweng, twrp 2.5.0.0 requires the recovery partition to be adjusted to 7mb?
i am trying to port twrp for the a919i which is similar to the a116 hd.
tia
 
haree

haree

Senior Member
Sep 13, 2008
4,021
720
CHENNAI
cant see SD

hi
i flashed the twrp and the root also done thanks
but this does not show the external SD do i need to do any thing to see it
any way i have flashed the SD swap and it is also working fine
thanks again for ur great contribution:good::laugh:
 
You must log in or register to reply here.

Similar threads

hyperion70
[Discovery][★ 4.4.2 ★] ROM for Micromax A116
Replies
1K
Views
306K
D
dangunmax
kashifmin
[ROM][CM11][PORT][UNOFFICIAL] CyanogenMod 11 For Canvas HD V0.1 - NxtGen
Replies
1K
Views
467K
A
Andy kale
thunderising
[INDEX] :: Micromax A116 Canvas HD :: {ROOT/RECOVERY/ROMS}
Replies
463
Views
238K
R
robbi1970@gmail.com
kumar abhishek
[ROM] [4.2.1] SamHD V3.2 Custom Rom For Micromax A116 [Discontinued]
Replies
564
Views
198K
P
pcbpradeep
droidiser
Micromax A116 Canvas HD: Discussions & All Things Thread
Replies
467
Views
187K
K
krishna baghel

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 30
    kumar abhishek
    kumar abhishek

    Using Flash Tools to Flash TWRP Recovery to A116​
    ​


    Requirements:
    TWRP Rewcovery
    Flash Tool
    A computer
    A Micromax A116 (obviously)


    Steps:-
    1. Install drivers for your phone using Micromax drivers.
    2. Extract the Stock ROM folder and replace recovery.img with TWRP recovery.
    3. Extract and open the SP Flash Tools.
    4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
    5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
    Check only recovery.img, preloader and uncheck all others.
    6. Switch off your phone (Remove the battery to make sure it is switched off).
    7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
    8. Click the Download option (present on the right of Firmware
    > Upgrade option) and the flash tool will start looking for your phone.
    9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
    **Don't interrupt this process as it can potentially brick your device.
    **Make sure no power interruption takes place. (Use a laptop to ensure this).
    10. After the process completes, a green ring will appear on your device signalling that the process was successful.
    11.Disconnect your phone.


    Auto Root Installation:-
    This version has the built-in Auto-Root feature for non-rooted devices...

    Steps :
    1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
    2. After reboot, there is a SuperSU Installer
    3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
    4. After reboot, SuperSU.apk will be there at app drawer... :good:


    Downloads :
    TWRP Rrecovery :
    http://d-h.st/IsY

    Kernel Sources :
    http://yadi.sk/d/fmIOi_ee6ADpi

    MT6589 Scatter File :
    https://www.dropbox.com/s/p0oc0769t5igt8s/MT6589_Android_scatter_emmc.txt

    SP Flsh tools:
    http://www.mediafire.com/?7ccl2tw67tklxdk

    Drivers:
    http://www.mediafire.com/download.php?nv96xclhjmaiclu

    64bit drivers:
    http://xdaforums.com/showthread.php?t=2206421

    TWRP is tested working. :)

    Changelog :

    [23/05/2013]
    1. TWRP Updated to 2.5.0.0
    2. Auto Root Fixed

    Credits:
    TWRP Tool- yuweng
    Testing And Screenshots- Mohammad Abdul Sajid, Vijay
    Press Thanks button if I helped!! :D
    View
    3
    Darklord96
    Darklord96
    kumar abhishek said:
    Add me in group ;)

    Btw for kitkat there must be a manufacturer releasing kitkat for mt6589 first ;)

    Sent from my C6503 using Tapatalk
    Click to expand...
    Click to collapse

    Added u and welcome to the group
    and edit this post remove your no. there may be stalkers here lol
    Be Safe :good:
    View
    2
    kumar abhishek
    kumar abhishek
    Add me in group ;)

    Btw for kitkat there must be a manufacturer releasing kitkat for mt6589 first ;)

    Sent from my C6503 using Tapatalk
    View
    2
    Darklord96
    Darklord96
    kumar abhishek said:
    Actually we both trust each other and its not about trust he was the most reliable tester i have ever had. He has test more than 500 rom builds for SamHD V4 though it qas never stable and hence we failed :(

    About kitkat i am also waiting for manufacturers to release kitkat build so that i can port it to canvas hd ;)
    Click to expand...
    Click to collapse

    u have us to test your roms
    u can join my whatsapp group
    @skd @Dhogai vannan @rajneeshk @Megatron007 @WalkerBales @kashifmin aka kernel development
    @manunair @MatrixGuy and darshan bro
    we can test your roms whenever u want
    View
    1
    kumar abhishek
    kumar abhishek
    peekeje said:
    After installing TWRP recovery successfully........it doesnt happen automatically when i reboot the phone as below.
    Then i tried to install the SuperSU and BIN files thru Recovery, and SuperSu can be found in the App drawer. but the Phone is not rooted when i check thru rootchecker. and even Titanium backup or any other app cant work which require root access.

    Pls tell me, how to successfully ROOT the phone. Even SuperSU installed, it cant update the binary.


    1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
    2. After reboot, there is a SuperSU Installer
    3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
    4. After reboot, SuperSU.apk will be there at app drawer... :good:
    Click to expand...
    Click to collapse

    First of all please dont quote whole post.
    It has been confirmed that there is some problem with autoroot
    Pls follow root procedure posted in cwm thread

    Sent from my C6502 using Tapatalk 2
    View

New posts