Fix soft bricked LG Optimus G(E975K)

Search This thread

Tezza98

New member
May 5, 2014
1
1
HOW TO FIX SOFT BRICKED LG OPTIMUS G
E975
E975K
E971
E972
E973
E974
THIS HAS BEEN TESTED ON THE E975K ONLY!
USE THIS METHOD AS A LAST RESORT!


Requirements:(i cant post links to download because this is my 1st post)
KDZ UPDATER
STOCK FIRMWARE.KDZ

STEPS FOR ROOTED LGOG WITH CWM BUT SOFT BRICKED
Put LGOG into Download mode
Hold up and down volume rockers
then hold power button and quickly insert usb connected to pc
Open kdz updater and set up like this:
TYPE: 3GQCT
PHONE MODE: CS_EMERGENCY


Load your stock firmware. kdz
Select “Launch software update”
Let the magic happen.
If the bootloader or cwm interrupts the flash then:
Unplug and then power off the device
Enter it into download mode and let kdz updater continue its flash.
If you phone is stuck on the lg or carrier screen then:
Power off device
Hold the down volume rocker and power button until you see a hard reset warning

Contiunue with the hard reset.
Finally you should boot into the stock lg setup wizard
Enjoy your new phone!
 
  • Like
Reactions: jancis201991

MitoTakatori

Senior Member
Jul 20, 2013
2,992
486
Quezon City
www.itman.philwebsite.com
HOW TO FIX SOFT BRICKED LG OPTIMUS G
E975
E975K
E971
E972
E973
E974
THIS HAS BEEN TESTED ON THE E975K ONLY!
USE THIS METHOD AS A LAST RESORT!


Requirements:(i cant post links to download because this is my 1st post)
KDZ UPDATER
STOCK FIRMWARE.KDZ

STEPS FOR ROOTED LGOG WITH CWM BUT SOFT BRICKED
Put LGOG into Download mode
Hold up and down volume rockers
then hold power button and quickly insert usb connected to pc
Open kdz updater and set up like this:
TYPE: 3GQCT
PHONE MODE: CS_EMERGENCY


Load your stock firmware. kdz
Select “Launch software update”
Let the magic happen.
If the bootloader or cwm interrupts the flash then:
Unplug and then power off the device
Enter it into download mode and let kdz updater continue its flash.
If you phone is stuck on the lg or carrier screen then:
Power off device
Hold the down volume rocker and power button until you see a hard reset warning

Contiunue with the hard reset.
Finally you should boot into the stock lg setup wizard
Enjoy your new phone!

There are so many of this tutorials in here already mate. But nice effort.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    HOW TO FIX SOFT BRICKED LG OPTIMUS G
    E975
    E975K
    E971
    E972
    E973
    E974
    THIS HAS BEEN TESTED ON THE E975K ONLY!
    USE THIS METHOD AS A LAST RESORT!


    Requirements:(i cant post links to download because this is my 1st post)
    KDZ UPDATER
    STOCK FIRMWARE.KDZ

    STEPS FOR ROOTED LGOG WITH CWM BUT SOFT BRICKED
    Put LGOG into Download mode
    Hold up and down volume rockers
    then hold power button and quickly insert usb connected to pc
    Open kdz updater and set up like this:
    TYPE: 3GQCT
    PHONE MODE: CS_EMERGENCY


    Load your stock firmware. kdz
    Select “Launch software update”
    Let the magic happen.
    If the bootloader or cwm interrupts the flash then:
    Unplug and then power off the device
    Enter it into download mode and let kdz updater continue its flash.
    If you phone is stuck on the lg or carrier screen then:
    Power off device
    Hold the down volume rocker and power button until you see a hard reset warning

    Contiunue with the hard reset.
    Finally you should boot into the stock lg setup wizard
    Enjoy your new phone!