Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss , I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
NOTE:- Archos 45 Platinum too has similar device specifications.The same CWM version worked for @best98 who is using an Archos 45 Platinum.
Tip:Using CWM touch recovery
When using the CWM Touch recovery you may notice that it is not really working properly and that touch is not doing anything. The fact is the touch is being registered and that the touch method is different than normal android because of limited drivers in recovery.
The working
Use one finger touch to scroll
Use two finger touch to select item
Installing a Recovery Menu
Rooting Your Device
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss , I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
NOTE:- Archos 45 Platinum too has similar device specifications.The same CWM version worked for @best98 who is using an Archos 45 Platinum.
Tip:Using CWM touch recovery
When using the CWM Touch recovery you may notice that it is not really working properly and that touch is not doing anything. The fact is the touch is being registered and that the touch method is different than normal android because of limited drivers in recovery.
The working
Use one finger touch to scroll
Use two finger touch to select item
Installing a Recovery Menu
Using PC
1) Install the Mobile Drivers.
2) Download Minimal ADB And fastboot [Windows users] Linux and Mac users might have to download the whole Android sdk as of now.
3) Download the recovery you want from the attachments below.
4) Rename them to recovery.img after extracting and copy it to a folder of know location.
5) Boot your device into fastboot mode.i.e Power on your mobile by pressing and holding Power button and vol+ Key.until you see A green screen.
6) Connect your device to the PC and open Minimal ADB and fastboot
7) Run the command " fastboot flash recovery C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG".
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
8) Wait untill it completes and VOILA new recovery installed.
Note: In case you want to preserve your stock recovery, run the command "fastboot boot C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG"
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
Using Mobile
Simple Method.
Just install the TACK Manager from here and install the recovery .Enjoy .
Not so simple method
Download the flashable recoveries from Below and flash it through CWM Or TWRP [Yes, you need custom recovery for this to flash]
Rooting Your Device
Method 1: Through CWM/TWRP
1) Download the SuperSU package provided below.
2) Copy it to the root of your SDCard
3) Select Install zip from SDCard
Method 2:Through Framaroot
Personally I Did not get any success by this method.But lot of users reported it to to work by using the Gandalf exploit.
Also some versions of framaroot work better on some devices as compared to others.So maybe just have to check which version works for our Mobile.
1) Download and install Framaroot.apk
2) On the exploits list select Gandalf
3) It'll probably crash the first time and apparently work the second time you launch it.
As I Am not sure which version of framaroot works for this mobile hence no upload
Attachments
Last edited: