[I9003] [HOWTO] flash Samsung I9003 Galaxy SL Firmware

Search This thread

kkrraazzyy

Inactive Recognized Developer
Jan 24, 2009
2,804
2,948
32
XDA 24/7
Xiaomi Poco F1
Samsung Galaxy S10e
Since there is no guide for flashing the Samsung galaxy S gt i9003 I have thought to make a thread on it so here it goes


1. Download and run odin.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file: latona_20110114.pit
4. Put your phone into download mode: Press Volume down + OK + Power.
5. Connect USB cable and the program will detect the phone's Com number.
6. Click Start button to download the PIT file to phone.
7. After it is Done Click on Reset button, then unselect Re-Partition box.
8. Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5
9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5
10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5
11. Remove the battery, then enter Device into Download Mode again.
12. Click Start button to flash these files to phone.
13. Do not touch anything till you see PASS on the program window.
14. Just do a factory reset after flashing using recovery

DOWNLOAD THE FIRMWARES FROM THIS THREAD : http://xdaforums.com/showthread.php?p=12310841#post12310841

IF there is only a file of the f.w i.e. pda file then do NOT use a pit file for flashing just select the pda and flash it

I have also attached the Odin and .pit file for download

Enjoy flashing and do at your own risk
 

Attachments

  • latona_20110114.zip
    459 bytes · Views: 92,958
Last edited:

sgsI9003

Senior Member
Mar 13, 2011
1,382
271
New Delhi
Thanks downloaded it now from the 1st post.
after entering captcha it should show me the link instead its shows
404 - Page not found
The file or page you tried to access is no longer accessible.
 

rex4u

Senior Member
Mar 8, 2008
847
310
@trip
No. This is generic European version. Indian version will be like I9003DDxxxx.
I will not advice any Indian friends here to flash this as there is no Indian firmware available and you could not give your phone for service in case if something goes wrong.

Sent from my GT-I9003 using XDA App
 
  • Like
Reactions: yaxx

sgsI9003

Senior Member
Mar 13, 2011
1,382
271
New Delhi
@sgsI9003
Source is www.samfirmware.com and you can trust the OP. Correct me if I am wrong.
See the attached screenshot of www.samfirmware.com, its not even available there hence I was wondering where did he get it from.

My main concern is that samsung is not giving any info as to what is new or what bugs are fixed/updated etc.

Android is an open source platform & samsung should have the courtesy to post a change log on its updates.
 

Attachments

  • 2011-03-24_102307.jpg
    2011-03-24_102307.jpg
    85.4 KB · Views: 1,141

yerfdes

Senior Member
Mar 26, 2011
210
1
sir my baseband version is I9003DXKB2 do you hace a link where can i find the files to be downloaded in order to flash my phone... thanksi n advance
 

rex4u

Senior Member
Mar 8, 2008
847
310
@yerfdes
Right now there are no Asian firmwares available. You will have to wait for some time :(
 
Apr 10, 2009
19
2
Udupi
Worked

Thanks, I tried the XXKB3 and it worked :). Wouldn't have tried if Kies was working properly. After many failed attempts and wasted bandwidth tried this method. Initially my phone didn't go to download mode and instead restarted. But Kies messed up my upgrading to firmware and got stuck in download mode. Then followed your method and it worked. Have no problem using European firmware. I too would like to know from where you got the ROM :confused: cause it's not listed in samfirmware.com
 

Top Liked Posts

  • There are no posts matching your filters.
  • 79
    Since there is no guide for flashing the Samsung galaxy S gt i9003 I have thought to make a thread on it so here it goes


    1. Download and run odin.
    2. Check Re-Partition, Auto Reboot and F. Reset Time.
    3. Click PIT button and select this file: latona_20110114.pit
    4. Put your phone into download mode: Press Volume down + OK + Power.
    5. Connect USB cable and the program will detect the phone's Com number.
    6. Click Start button to download the PIT file to phone.
    7. After it is Done Click on Reset button, then unselect Re-Partition box.
    8. Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5
    9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5
    10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5
    11. Remove the battery, then enter Device into Download Mode again.
    12. Click Start button to flash these files to phone.
    13. Do not touch anything till you see PASS on the program window.
    14. Just do a factory reset after flashing using recovery

    DOWNLOAD THE FIRMWARES FROM THIS THREAD : http://xdaforums.com/showthread.php?p=12310841#post12310841

    IF there is only a file of the f.w i.e. pda file then do NOT use a pit file for flashing just select the pda and flash it

    I have also attached the Odin and .pit file for download

    Enjoy flashing and do at your own risk
    3
    wat type of error
    2
    after entering captcha it does not show the download link instead gives error.
    2
    @ sgs

    dude i have attached the odin and .pit file on the first post you can download them from the first post
    1
    Thanks,
    but the links to odin are dead
    404 - Page not found
    The file or page you tried to access is no longer accessible.