Hi
I have a used Qtek 9100 with preinstalled NBD 9.3 ( Do not know who did it? ). I know it is a G4 and it may be CID Unlocked. I wanted to flash a new or another ROM so what should I do.
What is the HardSPL and SoftSPL, do I need to use these to flash new rom to my mobile.
I have installed/checked the Wizard Service Tool v4.2.2. These are the info..
--------------------------------------------------------------------
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384008852681
=> Bootloaders:
IPL: 2.17.0001 (G4 device)
SPL: 2.17.0001 (G4 device)
Built on Feb 10 2006 at 11:55:14
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.2.xxx (Build 18125.0.4.2)
ROM: 0.0
Registry AKU: .0.4.2
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
4fb80df6 - 19.00k (0x4c00)
ee9ce08e - 9.99M (0x9fd800)
ceadaa12 - 43.24M (0x2b3e000)
eeb28aa2 - 50.88M (0x32e0000)
eeb287ee - 3.00M (0x300000)
0eb2879a - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000fd23020138300e891503067f
Key Index: 2
------------------------------------------------------------
Please guide me.
At last, BT icon is disabled in taskbar. How to enable it? Please help....
Many Thanks
Srikanth.K
With IPL/SPL 2.17.0001 and running NBD 9 series,which is a wm6 rom,it must have be upgraded through 'SoftSPL' method,now you can change the rom either with SoftSPL or if you want to get your phone semi-CID unlocked,you can apply 'HardSPL',it'll flash patched IPL/SPL to make it semi-CID unlocked,remember,a G4 device cannot be permanantly CID unlocked like a G3 phone,but you'll be able to flash any wm6 or 6.1 rom easily with HardSPL.
HardSPL method is done only once and after that you can flash and change rom easily,where as,with SoftSPL,you'll have to do the Flash every time through SoftSPL,but it doesn't change the original Bootloaders (IPL/SPL).
The choice is your !