[TOUCHCOVERY] 4EXT Recovery Touch v1.0.0.6 RC 2

madmaxx82 · Dec 5, 2011

Proudly presenting:
4EXT Recovery Touch

brand new user interface: "4EXT UI"
touchscreen only
extremely fast
much more useful features than the already feature-packed 4EXT Recovery Classic v2.2.7 RC5 (see 2nd post)
optionally save space by configuring recovery to exclude /cache from backups
you can configure recovery to save even more space by excluding dalvik-cache from backups
calculates real space needed to complete a backup to save you from troubles
detects your local time zone
-> correct time is used for backups you start from within recovery
allows you to change md5sum check behaviour
displays and updates your current battery level in real time
scrollable texthistory (drag down the statusbar)
built-in interactivity (yes/no questions) for updater-scripts
built-in screenshot functionality
extensive theming capabilities!
nearly ALL YOU SEE is changeable.
"worker bar": create your own custom animations, there are (nearly) no limits! Use any shapes/sizes/animations et.c.
extra low cpu needed for that: absolutely no negative impact on backup/restore speed.
async UI rendering for optimal performance for the "heavy tasks" like backup/restore
backups even faster than with usual recoveries.
.. explore the new interface to see more
includes all features of 4EXT Recovery Classic

INFO:

For App and Rom devs:

Make use of the Recovery Interface Api provided by the (free and paid) 4EXT Recovery Apps to push updates/mods/addons for auto installation.
Very easy to use and to integrate into Apps or even shell scripts.

Please check 3rd post.

Info regarding 4EXT Recovery Touch and its yesno feature, or any interactive installer scripts you might already use, please see 3rd post.

Themes for 4EXT Recovery Touch:

Official 4EXT Recovery Themes Index & Discussion Thread

Download

All downloads are available through 4EXT Recovery Updater.
It's free, no ads, no tracking, no nothing, don't worry
..and of course via 4EXT Recovery Control

This ensures that your downloads are ok by automatically verifying md5sums and that known issues and changelogs are easily accessible
When you install or download a recovery via the app it makes sure that your recovery config is correctly set up.
It allows to automatically setup your time zone for recovery.
You can use it to get notified about updates regarding your recovery version
You can configure it to get notified in case any critical bugs have been discovered of the recovery version you currently have installed.
It allows me to update known issues/changelogs immediately and to quickly pull a newly released version if there were reports about critical bugs
You can also use it to just download a recovery.zip containing the image. The download will be automatically verified for correct md5sums!

By default the app also saves the recovery.img you flash on your sdcard,
so you can use it to flash the recovery via fastboot in case you need to do that one day.

If you somehow lost those files, there's a direct download for a version you can flash via fastboot.

4EXT Recovery Control

Free version: Recovery Updater
Fully featured: Recovery Control

For a list of its many features, visit www.4ext.net

Some examples :

Very easy to use, but also includes an extensive set of features available via "advanced mode"
Comfortable configure all settings of recovery
Calculate the space needed to create a new full or advanced backup

So you can make sure the backup will succeed before even rebooting into recovery.
Advanced Backups: While you are selecting / deselecting partitions, it will display and update the currently needed space to complete that custom backup set.
Identifies and adds your romname so you don't need to type so much when chosing a meaningful name for your backup
When you restore a backup, the app does the md5sum check instead of the recovery

This ensures that you know whether the restore process will succeed before even rebooting into recovery
Flash as many zip files you want in one go
Automatically calculate and display the md5sums of all zip files you are going to flash
Check your backups' health to ensure they will restore later when you need them, by verifying their md5sums!
Optionally, but highly not recommended:

If md5sums don't match but you really need that backup badly, you might want to restore it anyway.
You can you this app to fix the md5sums of a given backup
As an example, the following is possible to do in just one session:

Restore a backup, set to create a backup / advanced backup before the restore,
format all partitions with a file system of your choice before the restore process starts,
flash additional zip files afterwards, fix permissions and select to stay inside recovery or to reboot automatically once all actions are complete.
Much, much more! See www.4ext.net

Big thanks to craacK for a lot of great icons!

Thanks:

Big thanks to DolphiCom for all the graphics, the worker bar and a whole lot of great ideas and to the many great testers who spent all day/night testing, reporting bugs, making suggestions, helping with decisions:

Jotha, craacK, Patrics83, Euphorie, Mike1986, Whiskey103, ptr_hamilton, Lizard, TheUntouchable

Big thanks to Jotha and Whiskey103 for testing the themes features creating and their first themes for 4EXT Recovery Touch.

Also Big thanks to all the donators to 4EXT Recovery and everyone who has bought 4EXT Recovery Control! Without you I wouldn't be able to spend as much time with the project:

SO A HUGE THANK YOU!

FRANKIE-BOY, SYRAKUS, FISHA21, ZJXPOT, ZEEKIZ, A USER, PHILOS64, STEVEATHOME, PREACHER65, BEN_PYETT, HAWST, ANIT77, ULTRA DROID, PTR_HAMILTON, BEANBEAN50, SEBASTIAAN15 and LOVEBOATCAPTAIN

Of course BIG THANKS to KOUSH for ClockworkModRecovery!
Without him, 4EXT Recovery wouldn't exist!

Thanks a lot to the following users for initial testing for specific devices :

PTR_HAMILTON, SEBASTIAAN15, THEUNTOUCHABLE, BMONSTER, ANDREIGHERGHE, PRESTON74, MADKAI, YASIR, PLAYPETEPP
IPERZAMPEM0, THESHAWTY, JBBANDOS, GREGFERNS and INCREDULOUS
Special thanks to Invasion2 and Stlouie65 for spending at least 10 hours of their time helping me debug a really nasty issue on the myTouch 4G!

Also thanks for obtaining calibration values for the touchscreen:

Wolfepakt
Jaibar
Jayallen1980
Stlouie65
Invasion2
PacerguyDon
Ben_Pyett
Dargocitfer
Darknessrise1234
Lizard
Azazel71

Kernel: official HTC kernel sources.

madmaxx82 · Dec 5, 2011

Features of 4EXT Recovery Classic:
(Use 4EXT Recovery Control or Recovery Updater for complete Changelogs and Known issues!)

not all features may be relevant for all devices

Displays additional information:

Identifies your current rom and displays its name
Current filesystems on your partitions
Free space remaining of all of your volumes
Current battery charge level

Backup | Restore:

Correctly calculates free space needed to complete a backup ( version > 2.2.6 RC4 )
Tar backups (can be switched on or off)
Complete CWMR5 compatibility
All Backups you create will be named after your currently installed Rom for easier identification.
Never unwillingly get "downgraded" to EXT3 again
Always restores backups using the file systems you HAD on your partitions at the time of creation!

-> all partitions formatted with ext4 at that time, will be restored to ext4. The same is true for ext3.
You can manually change any existing Backup to ext4 or ext3

-> so that after a restore, all partitions and up with the file system you wanted!
Advanced Backup: backup only a single partition
Convert any of your partitions to EXT4 or EXT3 without data loss.

Formatting:

When you wipe or format it will always use the same file system you currently have.

-> but you can change that
When you format ext4 it will always create an aligned file system
Correctly identifies unformatted sd-ext partitions

-> if it finds one it displays a warning and suggests you may format them by visiting the 4EXT menu
Filesystem check and repair option in advanced menu

Partitioning:

Alignment check of your partitions
Full support for up to 2 sd-ext partitions + swap (Backup/restore/format/convert, fsck, et.c.)
(RE-) Partition your sdcard for sd-ext without removing your fat32 partition.
All partitions created with 4EXTRecovery will be perfectly aligned to 4k

Installing:

Integrated md5sum checking option

Menus:

Most popular menu items rearranged
Format menu
Power Menu + option to reboot into bootloader
Changed Advanced Restore: first select what you want to restore, then select the backup

-> Useful for restoring from "Advanced Backups"

4ext.prop:

Configuration file on your sdcard where you can set options to be used by 4EXTRecovery
Change all settings conveniently with 4EXT Recovery Control
Many more options to come
Share your settings / themes by packing your config into a flashable theme

Other stuff:

USB Storage Autostart (must be switched on)
Mount usb storage exposes all partitions on your sdcard to the os (not just fat32)

-> you could even partition your sdcard from your PC while connected via USB
Switch haptic feedback on/off
Button backlights

madmaxx82 · Dec 5, 2011

Recovery Interface Api for Apps and Scripts

Both: free and paid 4EXT apps now provide a very easy to use interface you can use to access 4EXT Recovery from within your shell scripts or apps.

Features:

wipe cache
wipe dalvik
wipe data / factory reset
install multiple zips at once
backup

If you are interested, please download this zip file with examples

How to make use of 4EXT Recovery Touch from within updater-scripts:

Since Beta 1.0.0.3 Beta 4 you can do the following:

identify whether the user is running 4EXT Recovery Touch or not (to use or not to use the following commands)
make use of the native yes/no dialogue (confirm / cancel buttons)
prevent recovery from redrawing the screen ( in case you need to use your own 3rd party interactive binary )

To identify 4EXT Recovery Touch:

Code:

if getprop("ext.edition") == "ng" then

<your code>

endif;

To use the native confirm dialogues:

Code:

ui_print("4ext: show_yesno"); # <-- recovery will pause your script and display "yes / no" buttons.
run_program("/sbin/sleep", "2"); # <-- for safety since the above is executed asynchronous 

#check the return value by calling:

if getprop("ext.confirm") == "yes" then

<yourcode>

endif;

To prevent recovery from redrawing the screen ( if you want to use an external binary that needs to occupy the screen and get the focus )

Code:

ui_print("4ext: disable_scrn_update");

# don't forget to enable it again after your yesno binary or graphical installer is finished, by calling:

ui_print("4ext: enable_scrn_update"); #otherwise the recovery will appear to be frozen as it won't update the screen anymore.

proxuser · Dec 5, 2011

wow very interesting man!

will try now! thanks

dan-fish · Dec 5, 2011

man i've been looking forward to trying this!!! Forgot about it in the midst of all the ics craziness going on.

blindndumb · Dec 5, 2011

WOW! This is SPECIAL.. Its Just awesome..
Trying It Now

Floatshow · Dec 5, 2011

Thanks a lot !

kylon · Dec 5, 2011

great job
but i have a doubt.
in this way there is the possibility to launch accidentally a comand,unless you added a prompt with confimation
there will be the possibility to choose the touch mode or the classic one?

malachay · Dec 5, 2011

Amazing! Thanks!

devwithzachary · Dec 5, 2011

A recovery that uses the touch screen

this has made my day, I have always thought this made more sense

gordo79 · Dec 5, 2011

Very nice cheers

Sent from my Desire S using XDA App

Tectas · Dec 5, 2011

Flashed it and it works and looks pretty nice, great work, only the confirmation window isn't the fastest^^

Swyped from my Desire S

harshs23 · Dec 5, 2011

I have 4EXT recovery control, the update notification takes me to the market to update but the update button is missing on the update page.

gordo79 · Dec 5, 2011

Harshs23 had the same trouble had to remove updates for markethall through manage apps then the update showed

Sent from my Desire S using XDA App

Tectas · Dec 5, 2011

harshs23 said:
I have 4EXT recovery control, the update notification takes me to the market to update but the update button is missing on the update page.

Uninstall it and download the new one from the 4ext site.
I made a fresh instal and it worked like a charm.

Swyped from my Desire S

harshs23 · Dec 5, 2011

Did not need to do any of that, a reboot sorted the issue. Thanks though.

Mental_Atom · Dec 5, 2011

Okay this is so awesome :-D flashed already!

Sent from my HTC Desire S using XDA App

Deleted member 4123551 · Dec 5, 2011

....

Awesome!

Sent from my HTC Desire S using XDA App

harshs23 · Dec 5, 2011

Unable to convert ext3 ( original sense 2.1 stock rooted ROM backup) to EXT4, just hangs and have to use the 3 button combo. Is it a bug or is it the ROM?

aajk · Dec 5, 2011

Interesting stuff guys..Will try too!

Sent from my HTC Desire S using XDA App

[TOUCHCOVERY] 4EXT Recovery Touch v1.0.0.6 RC 2

Retired Recognized Developer

Attachments

Retired Recognized Developer

Retired Recognized Developer

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Inactive Recognized Developer

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Deleted member 4123551

Guest

Senior Member

Member

Similar threads

Top Liked Posts