[Q] Some one help me!!! MOTO SPICE XT300

Search This thread

danidesi

Member
May 8, 2010
10
1
I have this POS Motorola Spice XT300 Android 2.1 Eclair (Non upgradeable, locked bootloader, no .zip update), I uninstalled some applications then I master reset the phone. Now phone is stuck at setup wizard (its in a loop).
I reset couple of more times but still the same problem. I can somehow manage to fix that problem if I get debug mode on.

some one help me to
1. "How I can enable debug mode" in this situation I cant find any way to get out that setup wizard, I tried menu + comb keys, they open only open wireless setup menu.
2. Is there any way to install .apk files without adb, cuz major problem is I cant do anything unless debug is not ON.

3. I got update file from same phone even the update file was signed(by using Droid , but i get error wrong footer and not verified signed blah blah error.

thanks
 
Last edited:

mipcomp

New member
Feb 1, 2011
1
0
(English)
Hello, before I apologize for my English.
My SPICE XT300 No boot and only the Motorola logo remained on the screen.
After many attempts and several readings I was able to reinstall the entire system in my motorola XT300.
Using RSD Lite 4.9, and when trying to use the ROM "SESLAU301.72.0" gave me the error: "Unable to retrieve interface handle. (0x7027); phone connected" and I could not do it until I did what I describe below.

1 - Download the SESLA_U3_01.72.0.sbf (Copy it to C: \)
2 - Install all drivers SPICE XT300.
3 - Connect the SPICE XT300 with the USB cable.
4 - Run RSD Lite 4.9.
5 - Remove the battery from the phone and wait a few seconds.
6 - Insert the battery cell phone and when it starts, hold down the X key on the keyboard until the XT300 a triangle with an exclamation point after that press the key combination ALT + X to access the RECOVERY.
7 - Select WIPE DATA / CACHE using the volume control keys and the ENTER key.
8 - Pay attention now, and remember that you already have a cell phone connected to the USB port and have run the RSD Lite 4.9 (in steps 3 and 4), so just select reboot option and immediately hold down the bar space until the blue screen appears with a message saying BOOTLOADER.
9 - If all this is done step by step you at this time on the screen of your computer would be seeing the RSD Lite 4.9 informing you that you have entered the ENGINEERING MODE.
10 - Using the mouse click on the button with ... (three points) and select the file you copied SESLA_U3_01.72.0.sbf C: \ (in step 1)
11 - Using the mouse, click the START button on the RSD Lite 4.9

And then on screen you will see that SPICE XT300 begin installing the system showing different messages, and at the same time, the window of the RSD Lite 4.9, you will see the progress of the process of flashing.

When it reaches 86% of the process is stopped momentarily, but then continues, so do not worry.

When the process ends, the XT300 SPICE will automatically restart.

Remember the first time the SPICE XT300 starts, it can take about 3 to 10 minutes.

I hope that what I just explained it helps someone.

Until next time!
Mariano

mipcomp@gmail.com
windor98@hotmail.com


(Español)
Hola, quería realizar mi aporte para ayudar a los que han pasado por lo mismo que yo y mi SPICE XT300.

Mi SPICE XT300 no booteaba y solo quedaba el
logotipo de Motorola quedaba en la pantalla.
Luego de muchos intentos y de varias lecturas logré
instalar nuevamente el sistema por completo en mi
motorola XT300.
Usando el RSD Lite 4.9, y cuando intentaba utilizar
el ROM "SESLAU301.72.0" me daba el error: "Unable to
retrieve interface handle.(0x7027);phone connected"
y no pude realizarlo hasta que hice lo que describo
a continuación.

1- Descargar el SESLA_U3_01.72.0.sbf (Copiarlo al
C:\)
2- Instalar todos los drivers del SPICE XT300.
3- Conectar el SPICE XT300 con el cable USB.
4- Ejecutar el RSD Lite 4.9.
5- Quite la batería del celular y espere unos
segundos.
6- Inserte la batería al telefono celular y cuando
éste se encienda, mantenga presionada la tecla X en
el teclado del XT300 hasta que aparezca un triángulo
con un signo de admiración, luego de esto presione
la combinación ALT+X para acceder al RECOVERY.
7- Seleccione WIPE DATA/CACHE usando las teclas de
control de volumen y la tecla ENTER.
8- Preste atención en este momento, y recuerde que
usted ya tiene el teléfono celular conectado al
puerto USB y ha ejecutado el RSD Lite 4.9 (en los
pasos 3 y 4), así que solo debe seleccionar opción
REBOOT e inmediatamente mantener presionada la barra
espaciadora hasta que la pantalla azul aparezca con
un mensaje diciendo BOOTLOADER.
9- Si todo esto lo realizó paso a paso usted en este
momento en la pantalla de su computadora estaría
viendo que el RSD Lite 4.9 le informándole a usted
que ha ingresado al MODO INGENIERÍA.
10- Utilizando el mouse haga click en el botón que
aparece con ... (tres puntos) y seleccione el
archivo SESLA_U3_01.72.0.sbf que usted copió en C:\
(en el paso 1)
11- Utilizando el mouse haga click en el botón START
en el RSD Lite 4.9

Y entonces en la pantalla del SPICE XT300 usted verá
que el sistema empieza a instalarse mostrando
distintos mensajes, y al mismo momento, en la
ventana del RSD Lite 4.9, usted verá el progreso del
proceso de FLASHING.

Cuando llega al 86% del proceso se detiene
momentáneamente, pero luego continua, así que no hay
que preocuparse.

Cuando termina todo el proceso, el SPICE XT300 se
reiniciará automáticamente.

Recuerde que la primera vez que el SPICE XT300
inicia, puede demorar alrededor de 3 a 10 minutos.

Espero que esto que acabo de explicar le sirva a

alguien.

Hasta la próxima!
Mariano

mipcomp@gmail.com
windor98@hotmail.com