as per given configuration screenshot(in post 1)
i have set my wall charge to 700ma
misc to 550ma
and usb to 500ma
is it fine?
does it include any risk over here?
I suppose there's no harm in that, the values will default to 450/650ma anyways.
as per given configuration screenshot(in post 1)
i have set my wall charge to 700ma
misc to 550ma
and usb to 500ma
is it fine?
does it include any risk over here?
Guys used these settings on turkby v33 gingerbread rom and changed kernel to neak and very impressed with the results. I have used phone like i do normally just checking email, facebook etc. Do u think i can make it even better?
Sent from my GT-I9100 using xda premium
i need default configuration values for SGS2
can anyone post it ?
The values vary for each device, if you're using Voltage Control then go to the app... press menu and remove boot settings. Then reboot your phone, wait 5 mins after it boots up and open the VC app again... go to the voltage tab and you will see your stock settings.
Ok, here we go as promised...
*** Again though, please be aware that these have not yet been tested thoroughly and some voltages may be too low for some of you... if that happens then please consult me here and I shall guide you. Also, be aware that some of you may have varied performance due to being on different ROMS and having different apps installed. Do not blame me if you don't get exactly the same results as me or someone else ***
---
REQUIRED:
ExTweaks app and SiyahKernel ICS
SETTINGS (CPU):
- CPU Hotplug = Default
- CPU IDLE Mode = AFTR + LPA (default)
- Smooth Scaling Level = 800Mhz
- SCHED_MC = 2
- CPU Undervolting = 100mV
- CPU Step Count = 18 (All available)
- Default CPU Governor = pegasusq
- Default CPU Scheduler = noop
- Scaling Max Freq = 1000Mhz
- Scaling Min Freq = 100Mhz
All other CPU settings as stock.
SETTINGS (GPU freq):
- GPU Freq Step 1 = 40Mhz
- GPU Freq Step 2 = 100Mhz
- GPU Freq Step 3 = 200Mhz
SETTINGS (GPU voltages):
- GPU Voltage Level 1 = 800mV
- GPU Voltage Level 2 = 800mV
- GPU Voltage Level 3 = 900mV
All other GPU settings as stock.
SETTINGS (other):
Screen settings stock. Vibration intensity = 3
Android logger enabled.
---
That's it really, one other thing I want to mention is that I do not use auto-brightness (unless I am outside). Usually my brightness meter is at around 40% all the time.
If you guys could see how these settings go for you, if everything works as it should then the above information will be added to the OP.
Great as always!! Thanks geko! How much juice did you get with this settings?
Sent from my hybrid SII with the power of ParanoidAndroid and Fluxi kernel
Not yet mate, I keep flashing a new CM9 nightly pretty much every day so it's hard to get a stable battery life reading. You're welcome to do it for me if you like
Maybe I can provide you some results on ParanoiAndroid Currently testing Fluxi, but I'll make some tests!
Sent from my hybrid SII with the power of ParanoidAndroid and Fluxi kernel
This is what I have so far...
Looks to me like almost 7 hours screen on time, plus I've been running live wallpaper all this time as well. Not too bad if I may say so
Sent from my 80GB CyanogenMOD 9 + Siyah ICS powered beast. Booya!!
Really good results!! Another battery cycle and I'll show my results with fluxi! But take in mind that I'm not as good as you in these things
Sent from my hybrid SII with the power of ParanoidAndroid and Fluxi kernel
@geko95gek
i am using Fox hound rom with siyah kernal 3.2.4
and using the settings which u have posted in first post of this thread
now what i have to do for applying new setting?
have to remove the previous setting first?
Ah ok, you should update to the latest SiyahKernel. Then boot up into your ROM and wait 5 mins. Then go into voltage control if you're still using that and remove boot settings. Then reboot your phone again.
Wait 5 mins then go to app manager and remove VC cache and date then uninstall it... reboot. After all this, follow the instructions on the previous page.
Haha thanks mate, we can only be as good as our devices are.
Ah ok, you should update to the latest SiyahKernel. Then boot up into your ROM and wait 5 mins. Then go into voltage control if you're still using that and remove boot settings. Then reboot your phone again.
Wait 5 mins then go to app manager and remove VC cache and date then uninstall it... reboot. After all this, follow the instructions on the previous page.
updated to latest Siyah kernal
please confirm that is these settings are for Fox hound rom as well?
does this include any risk ?
and do we have do apply all changed setting at once in Ex tweak ?
or we have to apply setting as soon as we change the value of any specific field in ex tweak?
[B][URL="http://goo.gl/eUPmA"]MagicConfig UV Tweaks[/URL][/B]
Great to see you've created a thread on your configs geko!!!
Been using your configs since around v1 and it has always provided me with the best battery life & performance. Keep up the good work
jermitano said:...btw im using ur config right now on 2.6.9...and with the kernel settling in im experiencing phenomenal batt life...2 hrs watching mkv film/screen on 6hrs/3g-h+ 8hrs/20 mins call/6hrs wifi/download game data (almost 1gb)...18hrs and still have 40% juice on it...
More feedback for you geko. Been using your magic config for about a week now and my phone has been as smooth as a ken doll.
I use bfg and ondemand 200Mhz - 1000Mhz plus all your voltages with the exception 200Mhz I use 875mv as it causes me no issues.
Getting around 48hrs uptime (from 24hrs - 32 hrs) which means the battery saving is great (and if I cared about the environment greener also)
Thanks again.
Since yesterday i'm using last siyah with settings from first post on noop-conservative combo with only difference that I set max to 1200..indeed those values make a huge difference on battery drain and also phone is stable like a rock!(omega 10.2 ROM)
Thanks a lot :thumbup:
Just would like to say thanx and i found this thread most useful, i was using siyah kernels before i went over to trying ics roms and i got amazing battery life out of my phone from following thid thread...
Dude.
3 days on phone, and 5hour display time is sick.
Thank you so much. :-D
Sent from my GT-I9100 using xda premium
Geko thanks for the settings !! Everything is perfect + smooth !!! CheckROM V4 + Siyah Kernel 2.6.7 + Lionheart Governor (deadline+tweaked conservative).......
Sent from my SmoothCriminal using xda premium
Did exactly what you suggested with siyah and voltage control.
Made a huge difference. About 1.5hrs more screen on time.
Previously used cfroot KK5 and setcpu to UV/UC and by 4.5 to 5 hours I'd be looking for a charger.
Thanks a million for this. I have smoother, better performance all round and what is a record for battery performance for me.
I'll be sticking to this setup for sometime now. Unless neak really is better.
All is working good now, unbelievable battery life. Many thanks geko, you have earned my "thanks" and a mention in my signature
Top thread gek. Best starting point for UV I've come across.
Thanks for spending months of your time nutting out a safe and thoroughly tested point for us to start at.
From your research it's easy as to move up or down to find the best settings and governors for our kernel and specific device.
I've found my personal favourite setup and finally can stop chasing performance and battery.
That's it for me with GB. Nothing left to do. If only it came out of the box like this.
Sent from my GT-I9100 using XDA App