[APP] NSTools v1.16 for managing various Ezekeel's MOD and tweaks

Search This thread
By:
Advanced…
superhil

superhil

Member
Jul 20, 2010
37
6
arifhn said:
the script should be there. what device do you use?
Click to expand...
Click to collapse
@arifhn
what is default file name?
i'm using nexus S i9023

---------- Post added at 03:53 PM ---------- Previous post was at 03:47 PM ----------
michalurban said:
What would the recommended Battery life extender value be? I want long battery life but also dont want to destroy the battery quickly ...
Click to expand...
Click to collapse

afaik, BLX doesn't increase battery capacity, it's only accesories to make the number 100%
 
S

sas_sas

Senior Member
Sep 13, 2007
943
96
İzmir
I have device i-9000 w/ ICS 4.0.4 Rom and Glitch v14 B6 kernel..

Regarding the BLN function,

Settings are as follows;

-Status ON
-Led time out 30 sec
-Bling Status ON
-Blink interval 500 ms

Happenings, when SMS or any Miscall comes the Leds are on, it is ok.
But 30 sec later it is supposed to start blinking but NEVER starts blinking WHY ?
Any comment?
 
Last edited:
M

mikiept

Senior Member
Mar 24, 2010
150
66
BUG report

@arifhn,

NSTools is applying governor settings before applying LiveOC and that means that:

We set LiveOC to 114% step 400000Mhz is now 456000MHz.

If the governor settings are set before applying LiveOC this frequency doesn't exist and after a reboot it automatically applies the next frequency available (probably 800000MHz).

I think you have to apply governor settings after applying LiveOC for the new frequencies to be valid.

Am I wrong?

Thank you for your work!
 
purpleraintoxicity

purpleraintoxicity

Senior Member
Feb 7, 2011
3,749
832
Jerusalem
sas_sas said:
I have device i-9000 w/ ICS 4.0.4 Rom and Glitch v14 B6 kernel..

Regarding the BLN function,

Settings are as follows;

-Status ON
-Led time out 30 sec
-Bling Status ON
-Blink interval 500 ms

Happenings, when SMS or any Miscall comes the Leds are on, it is ok.
But 30 sec later it is supposed to start blinking but NEVER starts blinking WHY ?
Any comment?
Click to expand...
Click to collapse

as far as I know, led time out means the time which after led if OFF

Sent from my GT-I9000 using Tapatalk 2 Beta-5
 
  • Like
Reactions: sas_sas
nexus.prime

nexus.prime

Senior Member
Mar 14, 2012
360
120
Hi arifhn

Plz support ch33kybutt's CMPlus-Tuna kernel when you are free :)

The best app for Setting Kernels

http://xdaforums.com/showthread.php?t=1586508

NS I/O Scheduler sysfs

/sys/block/mtdblock4/queue/scheduler
/sys/block/mmcblk0/queue/scheduler


GN I/O Scheduler sysfs

/sys/block/mmcblk0/queue/scheduler
/sys/block/mmcblk0boot0/queue/scheduler
/sys/block/mmcblk0boot1/queue/scheduler
/sys/block/mtdblock0/queue/scheduler
 

Attachments

  • 99cmplus.zip
    1 KB · Views: 2
  • 99glados.zip
    1.1 KB · Views: 2
Last edited:
vitoski

vitoski

Senior Member
Mar 1, 2009
944
780
Poland
Has anyone experience an issue with disabling Touch-wake? My phone keeps waking after I turn off the screen with Lock Screen Widget due to touch sign after clicking on the widget.
Tried to enable and disable touch wake but without any luck.

I did wipe cache and reflash kernel along with restoring default settings for NStools but no joy:-(

I am on AOKP b32 with Devil 0.65

Wysłane z mojego GT-I9000 za pomocą Tapatalk
 
jgreene1014

jgreene1014

Senior Member
Aug 8, 2011
495
127
CT
My apologies if it was answered prior. I charge my nexus s4g overnight while sleeping. If I leave on BLN and receive a message over night can any harm be done to the phone with the lights staying on so long?
 
daskalos.healing

daskalos.healing

Senior Member
Apr 20, 2012
74
27
The best app for kernel-settings! Thanks, sir :)

---------- Post added at 10:14 PM ---------- Previous post was at 09:51 PM ----------
nexus.prime said:
Hi arifhn

Plz support ch33kybutt's CMPlus-Tuna kernel when you are free :)

The best app for Setting Kernels

http://xdaforums.com/showthread.php?t=1586508

NS I/O Scheduler sysfs

/sys/block/mtdblock4/queue/scheduler
/sys/block/mmcblk0/queue/scheduler


GN I/O Scheduler sysfs

/sys/block/mmcblk0/queue/scheduler
/sys/block/mmcblk0boot0/queue/scheduler
/sys/block/mmcblk0boot1/queue/scheduler
/sys/block/mtdblock0/queue/scheduler
Click to expand...
Click to collapse

would greatly appreciate that. :) ch33kybutt's CMPlus-Tuna kernel needs NSTools
 
arifhn

arifhn

Retired Recognized Developer
Nov 5, 2010
197
426
Jakarta
nexus.prime said:
Hi arifhn

Plz support ch33kybutt's CMPlus-Tuna kernel when you are free :)

The best app for Setting Kernels

http://xdaforums.com/showthread.php?t=1586508

NS I/O Scheduler sysfs

/sys/block/mtdblock4/queue/scheduler
/sys/block/mmcblk0/queue/scheduler


GN I/O Scheduler sysfs

/sys/block/mmcblk0/queue/scheduler
/sys/block/mmcblk0boot0/queue/scheduler
/sys/block/mmcblk0boot1/queue/scheduler
/sys/block/mtdblock0/queue/scheduler
Click to expand...
Click to collapse
Ok, i just need to add those sysfs to my config


nexus.prime said:
http://code.google.com/p/android-php-translator/

PASTT: PHP Android String Translation Tool
Click to expand...
Click to collapse

thanks, i will take a look
 
  • Like
Reactions: daskanda, reference.phone, daskalos.healing and 1 other person
A

anuj_blaster

Senior Member
Oct 22, 2011
261
17
are these mods for all types of rom.. how do I know my rom is supported?

I am currently using stock rom with cfroot 4.3
baseband xxjvt
build no. gingerbread xwjw1

Sent from my GT-I9000
 
J

Jamalsid

Senior Member
Oct 20, 2010
448
92
Swansea, Wales, UK
anuj_blaster said:
are these mods for all types of rom.. how do I know my rom is supported?

I am currently using stock rom with cfroot 4.3
baseband xxjvt
build no. gingerbread xwjw1

Sent from my GT-I9000
Click to expand...
Click to collapse

These mods are kernel related not ROM related. You must run a kernel that supports them. On the galaxy S I think it is only the Glitch kernel that has support (at least it used to be, got rid of my galaxy s a while back so things may have changed.)
 
  • Like
Reactions: anuj_blaster
A

anuj_blaster

Senior Member
Oct 22, 2011
261
17
Jamalsid said:
These mods are kernel related not ROM related. You must run a kernel that supports them. On the galaxy S I think it is only the Glitch kernel that has support (at least it used to be, got rid of my galaxy s a while back so things may have changed.)
Click to expand...
Click to collapse

the creator writes in bold red that the kernel is only tested on CyanogenMod / MIUI based roms :(
and i like to stay with stock..

should i try in on stock rom?
 
Last edited:
bleuxeon

bleuxeon

Senior Member
Jan 25, 2012
800
282
Near COGNAC (FR)
I have found a major mistake in NSTools french translation :


Screenshot_2012-05-04-22-38-45.png



"Tension puce graphique" states in french for "GPU chip voltage" and not for what it is : Internal Voltage.

Also could you please make an option to use english in NSTools rather than using automatic detection?

I allways avoid using "localized" language in all app, now I have one more reason to do so...:p
 
You must log in or register to reply here.

Similar threads

djdarkknight96
[Theme] DA JELLY Themes - "NEW" CLEARJELLY & TeamBlackout Black and Transparent Apps
Replies
825
Views
246K
djdarkknight96
djdarkknight96
chris378
[APP] One Click Root for NS4G!
Replies
407
Views
95K
P
poudigne
decalex
[MOD+THEME] ☆ [Amoled BLUE 3.1  AOKP b40] ☆ [26.JUN.2012] ☆ [NS+NS4G]
Replies
639
Views
94K
sasokutenshin
sasokutenshin
fergie716
  • Locked
[MODS+GUIDES+THEME+REF][CARRIER LOGOS] ICS MODS, LunarUICS and Guide for Theming ICS
Replies
1K
Views
163K
Mr. Clown
Mr. Clown
devgee
[APP]Latest DSP Manager for ICS
Replies
56
Views
93K
Z
Zoli1972

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 232
    arifhn
    arifhn
    Search for 'nstools' in market, its FREE

    You can manage this tweak:
    - BLD
    - BLN
    - BLX
    - CPU Governor
    - Custom Voltage, now also support uv_mv_table (some kernel still use this)
    - Deepidle
    - Liveoc
    - Max/min scaling frequencies
    - Touchwake
    - CM Led
    - IO scheduler selection
    - Fast charge toggle

    this app will restore seting on boot,
    so you don't need to create/edit init script

    NSTools icon by Ziv Feldman

    German translation and tab icons by fschaefer
    Italian translation by mattia.b89, updated by etoy
    French translation by benseoul
    Korean translation by phone_user
    Dutch translation by jorim.tielemans, updated by micha3lvd
    Polish translation by marekcichecki
    Portuguese translation by Mykos

    Source code:
    https://github.com/arifhn/NSTools

    Notes:

    - If something bad happenned and you want to reset NSTools config,
    install reset_nstools.zip in recovery (if its not work, try to mount /data from recovery menu before applying the zip)

    - If you want to switch kernel, i recommend to uncheck 'restore on boot' setting.
    It will reset to default kernel setting. You can recheck that after reboot.

    - starting in v1.8 app will detect kernel version on boot, if the version has changed the settings will be discarded.

    - The new permission on v1.12 and up: read contacts is used for detect missed call. You can check the source code on my github to make sure this app don't read/send your contacts data.

    - read this thread about CPU governor

    - for those who have problem with smartassV2 governor settings, ask your kernel developer to patch their source, see this post
    krfoy said:
    just fix the issue in smartassV2

    it's not a NSTools issue.
    Click to expand...
    Click to collapse

    - visit http://cyann.mobi/ for more information



    For ROM developer
    I've added Android.mk file so you can directly build NSTools with android build system
    I've also publish my certificate here https://github.com/arifhn/platform_build

    View
    10
    arifhn
    arifhn
    released version 1.15
    with ondemand, conservative, smartass2 and interactive governor parameters


    frenccw said:
    The latest NSTools is overriding the blinking settings that i have on my BLN Control Pro app. Is there a workaround for this?

    (I noticed this only happened after i updated to a new ROM though, would this be ROM-related?)
    Click to expand...
    Click to collapse
    Sorry, I dont understand. What is the problem?
    View
    10
    arifhn
    arifhn
    nexus.prime said:
    Hi arifhn

    You seem busy these days in real life.

    GN CMPlus and Air kernel users are waiting for the support of NSTools :D

    Thanks, dev :)
    Click to expand...
    Click to collapse

    I'm sorry, a bit busy :(

    Be patient, pls wait for ver 2.0


    Sent from my Crespo using XDA
    View
    10
    arifhn
    arifhn
    released v1.14

    whats new?
    - slide to change tab
    - fix FC if service enabled
    - updated translation
    View
    8
    arifhn
    arifhn
    loonieryan said:
    Excellent, thank you sir! Do you have a new APK that we can test?
    Click to expand...
    Click to collapse
    new apk

    coldplay3 said:
    I am wondering if this problem is to know.

    Rom : Codename Android Nightly.
    Kernel : Air kernel.

    Of course, I'd like tell about NSTools.
    Live OC reboot after applying the maximum value of the minimum values ​​are same.
    This problem can be solved, if you already want to know what is going to resolve known issues.
    Finally, my English a horrible. Thanks.
    Click to expand...
    Click to collapse

    sorry I don't understand. I've tried to set liveoc target low and high with same values, but didn't get reboot.
    View

New posts