[Q] gs2 att i777 died while charging overnight

Search This thread
By:
Advanced…
V

vprabs

New member
Aug 30, 2014
2
0
i had my phone plugged to the charger overnight about 2 weeks back. it was charging then, however it was completely dead in the morning.

tried holding the power button, nothing on the screen
tried removing the battery (had it out for > 1hr) and then inserted the battery back and tried charging/starting , nothing on the screen
i tried the power + volumerUP + volumeDown and nothing on the screen
Tried plugging the USB to a computer and tired to put the phone in download mode , but screen was dead.

i tried replacing the battery with a new one (from ebay) and it is still dead. the battery show about 3.8V when i check the + and - terminals using a multimeter.

it was working the night before and was dead in the morning, the phone is about 22 months old and it was running the original rom (i had rooted the phone about a year back),

i am not sure if the phone is bricked, please help guys.
 
C

creepyncrawly

Senior Member
Sep 3, 2010
2,768
3,276
vprabs said:
...Tried plugging the USB to a computer and tired to put the phone in download mode , but screen was dead.

...i am not sure if the phone is bricked, please help guys.
Click to expand...
Click to collapse

bricked = no sign of life under any circumstances

Try putting the phone into download mode when the battery is removed. Pull the battery and leave it out. Connect the phone to the PC via USB cable, and hold down vol+ and vol- (but not pwr). The USB cable will supply the power. Let us know if it will boot into download mode using this method.
 
  • Like
Reactions: SteveMurphy and cyril279
V

vprabs

New member
Aug 30, 2014
2
0
creepyncrawly said:
bricked = no sign of life under any circumstances

Try putting the phone into download mode when the battery is removed. Pull the battery and leave it out. Connect the phone to the PC via USB cable, and hold down vol+ and vol- (but not pwr). The USB cable will supply the power. Let us know if it will boot into download mode using this method.
Click to expand...
Click to collapse

Thanks for the reply.

I tried to put the phone in download mode when battery is removed, however there was no message/flicker either on the screen and the computer did not recognise any device. I held the vol+ and vol- buttons together for about 15 seconds.
 
C

creepyncrawly

Senior Member
Sep 3, 2010
2,768
3,276
vprabs said:
I tried to put the phone in download mode when battery is removed, however there was no message/flicker either on the screen and the computer did not recognise any device. I held the vol+ and vol- buttons together for about 15 seconds.
Click to expand...
Click to collapse

Sounds like a true brick. The phone is getting old enough that it may not be cost effective to send it out for repair. But if you do choose to go for a repair, Mobile Tech Videos in LA has a very highly respected reputation here.

There are several ways to put the phone into download mode. You should try all of them that you can before you give up.

Recovery mode:

With the phone off (and not connected to the computer), and battery installed, hold all three buttons, vol- vol+ pwr continuously until the initial boot screen appears the second time.

Download mode:

1. With the phone off and connected to the computer via USB cable, and battery installed, hold all three buttons, vol- vol+ pwr.

2. With the phone off and battery installed, hold vol- and vol+ (but not pwr) while plugging in the USB cable.

3. With the phone off and battery installed, hold vol- (but not vol+ or pwr) while plugging in the USB cable.

4. Attempt each of the above three options with the battery removed from the phone. The computer will supply the power to the phone.

5. Use Android Debug Bridge (adb) which will only work if USB debugging has been already turned on in Developer Options, since you can't boot into the system to turn it on. With the battery installed and the phone connected to the pc via USB cable, use the command "adb reboot download".

6. Use a USB jig. With the battery installed insert the USB jig into the USB connector of the phone. Some have reported that this method works when no other method would work.
 
  • Like
Reactions: pepe100, SteveMurphy and cyril279
You must log in or register to reply here.

Similar threads

E
[Firmware][SGH-I777][JB][4.1.1] CyanogenMod 10 preview | USER THREAD
Replies
4K
Views
780K
S
sam3000
SeanHacker
  • Locked
[Rom] AOKP(Jellybean 4.2.2) | Task650 (6.24.13) AT&T
Replies
29K
Views
4M
SeanHacker
SeanHacker
atinm
[ROM][SGH-I777][4.0.4] CyanogenMod 9 nightly builds | DISCUSSION THREAD
Replies
4K
Views
676K
Lekerstein
Lekerstein
shoman94
[RoM][XWLPY-4.0.4-ICS]SHOstock2 v6.2 [11/13/2012](FINAL)
Replies
10K
Views
1M
V
Vintage144
t3chn0s1s
  • Sticky
[INDEX]AT&T I777 GSll {Root/ROM's/Tools}
Replies
106
Views
222K
T
Tmobilefan906

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 3
    C
    creepyncrawly
    vprabs said:
    I tried to put the phone in download mode when battery is removed, however there was no message/flicker either on the screen and the computer did not recognise any device. I held the vol+ and vol- buttons together for about 15 seconds.
    Click to expand...
    Click to collapse

    Sounds like a true brick. The phone is getting old enough that it may not be cost effective to send it out for repair. But if you do choose to go for a repair, Mobile Tech Videos in LA has a very highly respected reputation here.

    There are several ways to put the phone into download mode. You should try all of them that you can before you give up.

    Recovery mode:

    With the phone off (and not connected to the computer), and battery installed, hold all three buttons, vol- vol+ pwr continuously until the initial boot screen appears the second time.

    Download mode:

    1. With the phone off and connected to the computer via USB cable, and battery installed, hold all three buttons, vol- vol+ pwr.

    2. With the phone off and battery installed, hold vol- and vol+ (but not pwr) while plugging in the USB cable.

    3. With the phone off and battery installed, hold vol- (but not vol+ or pwr) while plugging in the USB cable.

    4. Attempt each of the above three options with the battery removed from the phone. The computer will supply the power to the phone.

    5. Use Android Debug Bridge (adb) which will only work if USB debugging has been already turned on in Developer Options, since you can't boot into the system to turn it on. With the battery installed and the phone connected to the pc via USB cable, use the command "adb reboot download".

    6. Use a USB jig. With the battery installed insert the USB jig into the USB connector of the phone. Some have reported that this method works when no other method would work.
    View
    2
    C
    creepyncrawly
    vprabs said:
    ...Tried plugging the USB to a computer and tired to put the phone in download mode , but screen was dead.

    ...i am not sure if the phone is bricked, please help guys.
    Click to expand...
    Click to collapse

    bricked = no sign of life under any circumstances

    Try putting the phone into download mode when the battery is removed. Pull the battery and leave it out. Connect the phone to the PC via USB cable, and hold down vol+ and vol- (but not pwr). The USB cable will supply the power. Let us know if it will boot into download mode using this method.
    View

New posts