[Q] help stuck in boot loop after flashing Android Revolution HD 53

me.aakash · Mar 23, 2014

my bootloader show the following

***UNLOCKED***
M7_WLV PVT SHIP S-OFF RH
CID-VZW__001
HBOOT-1.54.0000
RADIO-1.12.42.0731
OpenDSP-v31.120.274.0617
OS-1.10.605.8
eMMC-boot 2048MB
Aug 7 2013,16:38:58.0

after flashing the custom rom android revolution hd it said "flashed successfully please perform a full system reboot". when performed a reboot its stuck into a loop

into a panic situation right now cant use my phone please help guys

i am having recovery TWRP 2.7.0.0

cmlusco · Mar 23, 2014

Cant you just restore a backup or flash another rom? What is android revolution hd based on, jb, kk? Make sure your firmware matches the base of your rom. So if you flash a rom based on jb also flash jb firmware, if your on a kk rom, flash the kk firmware.

Also you say you have twrp 2.7.0.0? That is not a valid version for the verizon htc one.

me.aakash · Mar 23, 2014

cmlusco said:
Cant you just restore a backup or flash another rom? What is android revolution hd based on, jb, kk? Make sure your firmware matches the base of your rom. So if you flash a rom based on jb also flash jb firmware, if your on a kk rom, flash the kk firmware.

Also you say you have twrp 2.7.0.0? That is not a valid version for the verizon htc one.

sorry i just heard a lot about this ROM and made up my mind to use it permanently, but after flashing when i got the problem, I searched for it everywhere and found that it does not provide support for Verizon HTC one....feeling like a buge dumbbo right now as i didn't do a backup.

Can you please suggest me a good custom rom for verizon HTC One and/or also any way to return to the stock firmware?

me.aakash · Mar 23, 2014

what is the valid version of TWRP for Verizon HTC One?

cmlusco · Mar 23, 2014

Well there are tons of good roms in the develompent and original development threads. I my self prefer to just use rooted stock.

The latest twrp is 2.6.3.4 http://vzw1files.dyndns.org/RECOVERIES/twrp/openrecovery-twrp-2.6.3.4-m7vzw.img

If you wanted to you could do an ruu to get back to the stock firmware. http://vzw1files.dyndns.org/RUUs/

HypostaticOnion · Mar 24, 2014

There is a 2.7.0.1. Also try ViperOne ROM.

Sent from my HTC6500LVWBLU using Tapatalk 4

If I've helped, please hit the thanks button

cmlusco · Mar 24, 2014

Thats cool, i didnt realize a new twrp had been released.

HypostaticOnion · Mar 24, 2014

I don't remember if it's an official build, but it's faster and smoother.

Sent from my HTC6500LVWBLU using Tapatalk 4

If I've helped, please hit the thanks button

me.aakash · Mar 24, 2014

ruu gives error during flash

cmlusco said:
Well there are tons of good roms in the develompent and original development threads. I my self prefer to just use rooted stock.

The latest twrp is 2.6.3.4 http://vzw1files.dyndns.org/RECOVERIES/twrp/openrecovery-twrp-2.6.3.4-m7vzw.img

If you wanted to you could do an ruu to get back to the stock firmware. http://vzw1files.dyndns.org/RUUs/

i downloaded the 1.10.605.8/ version from the link you provided but this gives an error during flash

cmlusco · Mar 24, 2014

What was the error exactly?

me.aakash · Mar 24, 2014

cmlusco said:
What was the error exactly?

i used usb otg and copied the zip file to the sd card and then clicked on install and then selected the zip file and the swiped...the following comes written on the screen

Updatind partition details...
Full SELinux support is present.
E:Storage partition '//TWRP/BACKUPS/FA37KS92245
Installing '/sdcard/rom.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
Error flashing zip '/sdcard/rom.zip'
Updating partition details...
Failed

me.aakash · Mar 24, 2014

i also wiped the cache and dalvik and tried again but same error

my mid is PN0731000

and currently cid is SuperCID but tried to flash the zip file with both VZW__001 and SuperCID and got same error

cmlusco · Mar 24, 2014

You do not flash ruus in recovery. You flash them using fastboot and a cmd prompt on your pc.

fasboot oem rebootRUU

fastboot flash zip nameoffile.zip

fastboot reboot

thaunknownartist · Mar 24, 2014

I'm having this same problem, but the issue I'm having is the fact that I'm running on Windows 8.1 x64 and it's not recognizing my fastboot. I'm getting the error 10 code for the device and I've tried updating the drivers and yes I do have driver verification off. Please help

me.aakash · Mar 24, 2014

cmlusco said:
You do not flash ruus in recovery. You flash them using fastboot and a cmd prompt on your pc.

fasboot oem rebootRUU

fastboot reboot

fastboot flash zip nameoffile.zip

after issuing the first command the reboots and a htc logo with black background is shown now after waiting for around 10 seconds i issue the second command aand here the problem arises as device enters into boot loop and restarts again and again, should i skip the second command or there's a way around?

cmlusco · Mar 24, 2014

My bad, i put those in the wrong order. It should be

fastboot oem rebootRUU

fastboot flash zip nameoffile.zip

fastboot reboot

Sorry about that.

---------- Post added at 12:14 PM ---------- Previous post was at 12:06 PM ----------

thaunknownartist said:
I'm having this same problem, but the issue I'm having is the fact that I'm running on Windows 8.1 x64 and it's not recognizing my fastboot. I'm getting the error 10 code for the device and I've tried updating the drivers and yes I do have driver verification off. Please help

Try these drivers. They work for me on win 8.1 x86, but should also work for x64. http://vzw1files.dyndns.org/ADB/ADB_Drivers.zip

Also when was the last time you update the adb.exe and fastboot.exe files on your pc? http://vzw1files.dyndns.org/ADB/miniadb.zip

thaunknownartist · Mar 24, 2014

cmlusco said:
Try these drivers. They work for me on win 8.1 x86, but should also work for x64. http://vzw1files.dyndns.org/ADB/ADB_Drivers.zip

Also when was the last time you update the adb.exe and fastboot.exe files on your pc? http://vzw1files.dyndns.org/ADB/miniadb.zip

This is the code I just got. "This device cannot start. (Code 10)

A request for the USB BOS descriptor failed." and I updated both adb and the drivers.

me.aakash · Mar 24, 2014

cmlusco said:
My bad, i put those in the wrong order. It should be

fastboot oem rebootRUU

fastboot flash zip nameoffile.zip

fastboot reboot

Sorry about that.

---------- Post added at 12:14 PM ---------- Previous post was at 12:06 PM ----------

Try these drivers. They work for me on win 8.1 x86, but should also work for x64. http://vzw1files.dyndns.org/ADB/ADB_Drivers.zip

Also when was the last time you update the adb.exe and fastboot.exe files on your pc? http://vzw1files.dyndns.org/ADB/miniadb.zip

thanx by the way skipping the second code worked....

cmlusco · Mar 24, 2014

thaunknownartist said:
This is the code I just got. "This device cannot start. (Code 10)

A request for the USB BOS descriptor failed." and I updated both adb and the drivers.

Im not sure. If you google "adb fastboot win 8.1 x64" there are tons of threads and youtube vidoes on how to get it working. Also make sure your using usb2.0 ports not usb3.0 ports on your pc.

thaunknownartist · Mar 24, 2014

cmlusco said:
Im not sure. If you google "adb fastboot win 8.1 x64" there are tons of threads and youtube vidoes on how to get it working. Also make sure your using usb2.0 ports not usb3.0 ports on your pc.

I've been doing this since 8am EST lol this is why I came to my forum. And my USB 3.0 is broke so I couldn't use it if I wanted too, I'm also running AMD not Intel so most of the fixes I see are for Intel or require USB 3.0 :/

[Q] help stuck in boot loop after flashing Android Revolution HD 53

Member

Senior Member

Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Member

Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Similar threads

Top Liked Posts