[ROM] [INTL] DSC v2.3

Search This thread
By:
Advanced…
streakOwner

streakOwner

Senior Member
Aug 23, 2011
112
26
The 406 ROM IS SAFE

The 406 ROM IS safe and the problem was not ın the rom ıtself or any low level baseband at all , but ınstead was a typo ın the ınstall.bat fıle whıch make automated ınstallatıons of the baseband fıles , namely the amss.mdb and the dsp1.mdb , somethıng lıke the maxıcets MIDFLASHERLITE or Multırecoveryflasher from UKSheep. So everythıng ıs SAFE ıf you dont use the automatıc ınstaller on that fıle , _n0p_ wıll soon provıde a updated versıon of the ınstaller for less advanced users havıng trouble flashıng the baseband fıles.


Lınk of the 406 pkg
http://www.multiupload.com/75ZNXCB370

Lınk of the Offıcıal 406 ROM
http://www.multiupload.com/L5VWGSX6EB

Enjoy the SAFE and the most stable custom ROM uptodate.
 
Last edited:
D

dsteinberg

Senior Member
Aug 26, 2010
108
22
milan
streakOwner said:
The 406 ROM IS safe and the problem was not ın the rom ıtself or any low level baseband at all , but ınstead was a typo ın the ınstall.bat fıle whıch make automated ınstallatıons of the baseband fıles , namely the amss.mdb and the dsp1.mdb , somethıng lıke the maxıcets MIDFLASHERLITE or Multırecoveryflasher from UKSheep. So everythıng ıs SAFE ıf you dont use the automatıc ınstaller on that fıle , _n0p_ wıll soon provıde a updated versıon of the ınstaller for less advanced users havıng trouble flashıng the baseband fıles.


Lınk of the 406 pkg
http://www.multiupload.com/75ZNXCB370

Enjoy the SAFE and the most stable custom ROM uptodate.
Click to expand...
Click to collapse


hello, and thankyou for your update. i am now runnning dsc 0.51b, flashed the zip 0.50b then the update 0.51b AFTER having copied over the update.pkg (406 olleh) on my SD fastboot flashed recovery.img (compatible with 14 ) and flashed the update.
all went fine, i then flashed the portrait.zip file from themanii and my streak boots up fine.
only strange The BB version shows GAUSB1A140514-US.
Advice: should i start all over again using the link provided by n0p or streakowner and download the 406 update, the 406recovery then factory reset then the 50b, then wipe dalvik and cache then 51b and that should fix and i should have the 406 BB?
ty
 
_n0p_

_n0p_

Senior Member
Apr 9, 2009
2,560
1,833
47
Kyiv
n0p.8bit.fm
dsteinberg, i think it would be sufficient to flash BB and DSP using
This package (just prepared and tested).
Extract it somewhere and run flash (flash.cmd)
--
Reorganized first post. I'm not good at it...
--
Quick update to v0.52b - possibly-not-working-at-all SoD workaround.
 
Last edited:
U

uglyrooster

Senior Member
May 13, 2005
68
12
Same issue here:

- Complete install from 406 via fastboot: GAUSB1A140514-EU

- Additional install via package: GAUSB1A140514-EU
 
streakOwner

streakOwner

Senior Member
Aug 23, 2011
112
26

Attachments

  • shot_000001.jpg
    shot_000001.jpg
    24.9 KB · Views: 223
_n0p_

_n0p_

Senior Member
Apr 9, 2009
2,560
1,833
47
Kyiv
n0p.8bit.fm
Guys, that's a really strange issue.
I don't have a PC right now at least to do a simple "fc /b " check.
To start: dsteinberg and uglyrooster - you have flashed 405 baseband before, am I right?
 
U

uglyrooster

Senior Member
May 13, 2005
68
12
Solution was possible with zip-file update to 406.

Sounds strange but was the last and only step that finally worked.

Btw: SOD solution with screen on in 0.52 works fine so far.

Thanks for that great ROM!

Sent from my Dell Streak using Tapatalk
 
D

dsteinberg

Senior Member
Aug 26, 2010
108
22
milan
uglyrooster said:
Solution was possible with zip-file update to 406.

Sounds strange but was the last and only step that finally worked.

Btw: SOD solution with screen on in 0.52 works fine so far.

Thanks for that great ROM!

Sent from my Dell Streak using Tapatalk
Click to expand...
Click to collapse
Hello can you outline in detail the steps you took to successfully have the 406 bb please

Sent from my Dell Streak using XDA App
 
U

uglyrooster

Senior Member
May 13, 2005
68
12
@dsteinberg:

Solution is easyier than everything else. Load this file from streakOwner:

http://www.multiupload.com/75ZNXCB370

Go into streakmod and make an update via update.zip, but choose the zip-file above.

At least you have to delete dalvik cache and cache, even a factory reset was not necessary coming from _n0p_'s ROM (I tested both ways).

You are not rooted afterwards and some settings are overwritten but even a restore afterwards from nandroid worked fine.

For sure a factory reset and building up from scratch will be the perfect way...
 
Last edited:
idkidk

idkidk

Senior Member
Oct 1, 2009
411
44
Piacenza
Hi _n0p_,

I have maxicetdroid 1.2 and streakmod recovery installed, can i flash directly the whole rom via streakmod (and do a factory reset) or i must restock the streak?

Tia
Idk

Sent from my Dell Streak using Tapatalk
 
U

uglyrooster

Senior Member
May 13, 2005
68
12
@idkidk:

I switched several times from maxicetdroid to _n0p_, no problems with deleting dalvik cache and cache.

As mentioned before: A factory reset is always recommended!
 
_n0p_

_n0p_

Senior Member
Apr 9, 2009
2,560
1,833
47
Kyiv
n0p.8bit.fm
smnc, that what logs are for :)
Glad to hear.
--
New wway's GingerTrue theme (v1.1) is available in new "themes" section.
 
Last edited:
T

takodijkman

Member
May 20, 2008
30
4
Hall
takodijkman said:
Thanks a million!!!

e.g. here on our forum: http://xdaforums.com/showthread.php?p=18826340#post18826340

Everywhere you see 406 Olleh in the same sentence with super-brick or low-level brick.
The truth is that those are mainly assumptions and I don't believe it really. I have also read that there are no real clues. Nevertheless, made me a bit more cautious with this type of ROM :).
Click to expand...
Click to collapse

Me posting the above post, makes me obliged to tell my experiences with your ROM installed now.

Ready???

It's simply awesome :p!!!

Love this one, really stable, fast, snappy.

Spent a lot of time and attention to the installation, to make that absolutely clean. Maybe a good thing to share for everyone having problems.

* factory reset
* reboot and fastboot; flash amss, dsp1 and recovery for 406
* reboot and update to 406 with recovery
* reboot and fastboot; flash StreakMod recovery
* reboot and go into SM, update with DSC's zip
* reboot and factory reset
* reboot and go into SM, update with DSC's update zip
* wipe Dalvik, cache and fix permissions
* reboot and factory reset
-> you're off to a great experience!

Don't forget to calibrate the battery (app from market, or use 'clean battery stats' in SM)
 
D

dsteinberg

Senior Member
Aug 26, 2010
108
22
milan
_n0p_ said:
New wway's GingerTrue theme (v1.1) is available in new "themes" section.
Click to expand...
Click to collapse

Fantastic, just installed and looks great, the percentage now is gone but it looked awful with higher dpi's.

/david

---------- Post added at 01:06 PM ---------- Previous post was at 12:35 PM ----------

Hello n0p,
as per this post
http://xdaforums.com/showpost.php?p=19010892&postcount=15

im having same issue: wifi signal is good, wifi icon shows as connected and im able to receive and send data. Then i put down the phone for some time or just dont have any input/output data and when i try again to use any application that needs connectivity i still have the wifi icon on top but i get no data error. a fix is to go into wifi disable and re enable it again to get it back to business.
ty
 
_n0p_

_n0p_

Senior Member
Apr 9, 2009
2,560
1,833
47
Kyiv
n0p.8bit.fm
dsteinberg, you know what i'll ask :)
Let's take a look at your log.
And try set WiFi Sleep to Never.
How's your baseband number problem?
--
I've actually experienced similar thing even on Dell's 351 firmware. WiFi zone, put Streak in pocket, out to have a sigarette, back - and WiFi cannot connect to network. Only difference - it was not shown as connected.
 
Last edited:
You must log in or register to reply here.

Similar threads

K
[ROM][Early pre-alpha] AOSP ICS 4.0.4_r2.1 for DS5.
Replies
614
Views
228K
H
hunderteins
tenorntex
[ROM] Longhorn 2.9.3 Updated 9-5-12
Replies
1K
Views
368K
DorkyDev
DorkyDev
Strephon Alkhalikoi
[DISCONTINUED][ROM][INTL][FORK]Traveller DSC ROM 2.4.6
Replies
145
Views
38K
M
Maria_Vartholomeos
S
[ROM] Simple Streak 1.2 - Lite ROM
Replies
835
Views
207K
djmax81
djmax81
D
  • Locked
[ROM] StreakDroid GingerStreak 2.4.4 RELEASE
Replies
404
Views
218K
rsfinsrq
rsfinsrq

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 121
    _n0p_
    _n0p_
    Let's start.
    System: Android 2.3.3 (Gingerbread)
    DSC ROM is based on Olleh 407/406 beta ROM.
    Our team point is to provide best ROM for Streak, stable and fast enough for everyday use.
    (and making waiting offical Dell release a bit less stressful :))
    DSC name was an acronym for Dell Streak Club, but now i'd say it's Dell Streak Community ROM, due to all efforts of everyone, involved in the project (v1.0 download count from my server is over 100.000 now). Thank you guys!
    Take a look at Quick Solutions section. It may have an answer for your problem.

    Announcement

    v2.0 Release information.

    Latest update information.

    Using 366 BB (AMSS) without blinking leds issue. (Just for information, superseded with 1.2 update)

    List of currently supported languages.

    Knowing your way around here.

    DSC Team Phoenix Universal kernel

    Arabic patch:
    http://n0p.8bit.fm/streak/v2.0-Arabic.zip
    With PDroid:
    http://n0p.8bit.fm/streak/v2.0-Arabic-PDroid.zip

    Please carefully read all information contained in this post. It will save you a lot of time later.​
    Introduction and changes from original 407/406 Olleh ROM:​
    • Initially made by two members (n0p and wway) of Russian Dell Streak Club. Russian users are advised to start from here.
      Current team list:
      n0p - it's me :)
      wway - theming/testing.
      streakOwner - lots of ideas and testing.
      ltrifonov - kernel development/system builder.
      greg9100(GSpecial) - kernel development/system builder.
      hunderteins - USSD hack, 14 channels WiFi hack.
      hPa – kernel/Wifi driver hacks.
      lordmorphous - theming/testing/framework hacking.
      btvbtv - testing/cable solution/support :)
      uglyrooster - testing/WiFi solution.
      khoacoi - file hosting/support.
      dsteinberg - testings/ideas.
      Trankvilli - testing.
      attila.m - extensive testing.
      _2bad4u_ - theming.
      dr.nemro - Arabic patch.
      Ace38 - Wonderful new boot animation for 2.0.
      uluvali - testing/support.
      Huge thanks to everyone who uses this ROM - for testing, support and important feedback.
    • Custom DSC-Team kernel. UV/OC, CIFS an TUN support, USB automount/OTG cable support.
    • Mugen Power batteries support - DSC Mugen Power config.
    • Deodexed.
    • Rooted with SimpleSU
    • Internationalized/Localized
    • Contains great GingerTrue theme by wway
    • ICS animations and QuickPanel added by wway.
    • Stock dialer works on non-stock DPI > 160.
    • One of random reboot bugs (division ny zero) nailed down.
    • Changed memory management and OOM grouping a bit.
    • CPU governor is set to "conservative" to preserve battery. CPU ramp tweaked for less lag.
      Manual change instructions. Also please look here.
    • Stage Launcher removed. Available as additional update.
    • Some engeneering leftovers removed.See this.
    • Added theme-independent CRT animation and enabled hardware UI acceleration.
    • DalvikVM changed. Dalvik parameters changed.
    • Screen turns on after power disconnect.
    • Battery level on standard lockscreen.
    • Revised tweaks (configurable).
    • Rogers tethering (removed APN lock).
    • "Backcover removed" detection removed.
    • Custom bootanimation by Ace38
    • Patches in WiFi driver - sleep timeout and power management.
    • DSConfig (system) – DSC ROM configuration tool.
    • DSC Gain - audio driver gain / brightness control.
    • Vibration on poweroff/reboot configurable.
    • Theme-independent Reboot option.
    • DSC Wallpapers - Launcher-free wallpapers pack.
    • Third-party apps, included in ROM can be removed due to new post-install process.
    • WiFi driver hacked to enable 14 channels
    • Proximity sensor (touchpad freeze) fixes.
    • Phase2 auth setting fixed.
    • Power button dejitter patch.
    • USB automount.
    • Number of SoD drastically redused. I personally haven't experienced any in two months.
    • init.d support.
    • zipalign script added.
    • Volume levels altered.
    • Media sounds from FroYo added.
    • USSD requests work.
    • Built-in WiFi fixer.
    • Camera has Torch mode.
    • Configurable CPU undervolting.
    • FPS uncap patch.
    • BB check removed.
    • EXT4 driver for EXT2/3 filesystems.
    • Configurable wake by other keys.
    • Boot time significantly reduced.
    Please read following before flashing!​

    Known bugs:​
    • Google Maps causes battery drain. Freeze it if you're not using it.

    DSC ROM downloads:​
    --
    Add-ons:​
    Themes: (Warning: themes under hide tag are incompatible with DSC > v1.2)​
    Traveller ICS Theme
    Quick solutions:​
    Changelog:​

    • 22.01.2013 - v2.3 Released Release post.
    • 24.12.2012 - v2.2 Released Release post. Merry Christmas!
    • 05.12.2012 - v2.1 Released Release post.
    • 27.11.2012 - v2.0.1 Released Release post.
    • 23.11.2012 - v2.0 Released Release post.
    • 29.10.2012 - v1.7 Released Release post.
    • 15.10.2012 - v1.6 Released Release post.
    • 11.09.2012 - v1.5 Released Release post.
    • 16.08.2012 - v1.4 Released Release post.
    • 31.07.2012 - v1.3 Updated Release post.
    • 30.07.2012 - v1.3 Released Release post.
    • 18.07.2012 - v1.2 Updated Release post.
    • 17.07.2012 - v1.2 Released Release post.
    • 14.05.2012 - v1.1 Released Release post.
    • 26.03.2012 - v1.0 Released Release post.
    • 23.03.2012 - v1.0 Testing Open test.
    • 19.03.2012 - v0.74 Testing Open test.
    • 27.02.2012 - v0.73 Released Release post.
    • 09.02.2012 - v0.72 Released Release post.
    • 30.01.2012 - v0.71 Released Release post.
    • 17.01.2012 - v0.7 Released Release post.
    • 16.01.2012 - v0.7 open test Release post.
    • 16.01.2012 - v0.7b-pre-3 Release post.
    • 13.01.2012 - v0.7b-pre-2 Release post.
    • 12.01.2012 - v0.7b-pre-1 Release post.
    • 05.01.2012 - v0.66b Release post.
    • 28.12.2011 - v0.65b Release post.
    • 21.12.2011 - v0.64b Release post.
    • 14.12.2011 - v0.63b Release post.
    • 05.12.2011 - v0.62b Release post.
    • 25.11.2011 - v0.61b Release post.
    • 21.11.2011 - v0.6b Release post.
    • 11.11.2011 (11.11.11) - To keep this date and to whose experiencing troubles with v0.54b:
      v0.55b.
      CPU governor set to conservative.
      New streakOwner's tweaks.
      wpa_supplicant.conf changed back.
    • 10.11.2011 - v0.54b:
      I'd consider this release as experimental, due to the following:
      1. CPU lowest frequency is set to 128MHz. This frequency also works on even lower power consumption. streakOwner's idea that proved it's usefullness. Again
      2. WiFi watchdog removed, as it consumes energy without actually helping the problem.
      3. Change in wpa_supplicant.conf (to eth0), that at least seems to help uglyrooster, while not breaking anything.
      4. New, revised version of tweaks by streakOwner
      5. As a side effect of my USSD/Tether research - framework contains less Olleh/KT code, but it only make size smaller.
      --
      I would like to have any report of any regression here or in PM.
      Thank you.
    • 06.11.2011 - v0.53b:
      GingerTrue theme v1.1.
      Enforced internal WiFi watchdog.
      Battery level on lock screen.
      streakOwner tweaks.
    • 02.11.2011 - v0.52b - Quick change - screen now turns on after disconnecting power (test-me SoD workaround)
    • 01.11.2011 - v0.51b - Kernel undervolted (direct binary hack).
    • 29.10.2011 - v0.5b - branch merge. New system framework from 406 Olleh ROM used.
    • 28.10.2011 - v0.34b - Latest kernel from Olleh used.
    • 27.10.2011 - v0.33b/0.42b - Factory Reset was causing a boot loop. Fixed.
    • 25.10.2011 - v0.41b. Put back memory management from v0.3b-v0.32b
    • 25.10.2011 - v0.4b. Added DJ_Steve's kernel.
    • 24.10.2011 - v0.32b. Hardware UI acceleration enabled. CRT animation enabled (just for fun)
    • 22.10.2011 - First public release (v0.31b)

    Wishlist/ToDo:​

    • Clean :)
    View
    33
    _n0p_
    _n0p_
    Instructions by SJackal​
    First install

    1. Charge Streak to 100%
    2. Copy DSC_v1.0 to root SD card
    3. Get streak into Fastboot, (don't plug usb connector to pc, power on with Camera button pressed. Wait 20 sec, then plug usb connector)
    4. Run flash.bat from 'DSC_flashme2' folder via command prompt, and follow all instructions
    5. When rebooting, immediately press both Volume buttons to enter the Dell menu
    6. With the Volume button navigate to the second option, 'upgrade...', and select by pressing the Camera button
    7. The StreakMod menu appears, navigate to 'update using zip', then select the DSC_v1.0.zip file
    8. When done, navigate back to the first screen, (back button), and select to reboot
    9. While rebooting, again press both Volume buttons and when entered the Dell menu, choose the first option to Factory reset
    10. And then wait for a long time


    Updates

    1. Copy updDSCvx.x.zip to root of SD card
    2. Make sure battery is charged at 100%, and that usb is still connected
    3. Shutdown and power on with both Volume buttons pressed
    4. In the Dell menu, with the Volume buttons choose second option, 'upgrade...'
    5. In the StreakMod menu navigate to 'update using zip', then select the updDSCvx.x.zip file
    6. When finished, in the StreakMod menu's (also Advanced section), wipe the Dalvik-cache, Cache partition, Fix permission, and optionally wipe the Battery data
    7. When finished, navigate back to the first screen using the back button, and select to reboot
    8. Unplug the usb connector when the reboot starts
    9. And then wait a few minutes
    --
    Quick flashing the ROM:​
    Instructions for fast flashing:
    DSC ROM "flash me before installing" pack.
    link@khoacoi
    Extract it to some folder and run flash(flash.cmd). Instructions provided in batch file itself.
    Then flash latest ROM and update.
    --
    Guides:​
    1.Guidelines for migrating from previous releases of DSC Roms.

    Since you are already using a version of DSC (Dell Streak Community) you know how to do upgrade, just a reminder please dont neglect, do a dalvik-cache wipe, a cache partition wipe and a fix permission from the StreakMod advanced menu.
    Optional, you can also recalibrate your battery by wiping battery data, while you are still flashing things , but be sure the battery was at 100 % before you stared flashing the updates and that the usb is still connected at the time of instalation, once you reboot, remove the usb cable and dont forget to let the first time your battery to drain out totaly until the phone shuts down by itself.

    2.Guidelines for migrating form other Gingerbread based ROMs.

    Coming from other Gingerbread Custom ROMs to DSC you need to be sure that you have the latest baseband 406 installed already,if you dont know which one you are actually using you can check easily on your phone, find Settings/About Phone/ and check the Baseband version (7th row), should read something like GAUSB1A140614-XX, if you dont see the 406 numbers than you have to update your baseband, as DSC requires and is tested to work with the latest 406 from Dell. To be sure nothing will go wrong during the flashing, it is highly adviced and recommended to use the DSC_flashme2.zip provided by (_n0p_) this way the human error during the flashing process is omitted. All you need is working Windows installation (32bit versions are tested) and the latest drivers form Dell installed on the PC. You need to extract the content of the zip file on any folder you like or the default folder offered by the system, DSC_flashme , but be sure to be easily accesed, you can remove the folder to any place you like after the flashing process, but since the adb.exe sits there , better dont delete it since logcats are highly apprechiated by the DSC team, to find out and erradicate bugs and problems. After the folder is in place , locate the flash.bat and double click on it, a windows DOS terminal will open, the instructions are clear for you , since you are supposedly familiar with such procedure before.

    After the first reboot, continue with StreakMod menu to flash DSC which you have already put on your SDcard beforehand. You are required to wipe dalvik, wipe cache partitions and fix permissions before you conntinue with the reboot, due to changes between kernels used in different customs ROMs you are required to calibrate your battery first thing after the system boots.

    3.Guide for migrating from Custom Froyo ROMs.

    Many of the things are the same as above " Migrating form Other Gingerbread based ROMs", such as the upgrading of the Baseband files, the procedure is the same, note that some apps arent optimised or you might have trouble running them in GB , that is a issue you have to deal with your application developer.

    4.Guidelines for migrating from Stock Froyo ROMs.

    Running a custom ROM has its advantages and disadvantage (you woid your warranty), advantages are many thou nandroid backups, speed , flexibility, root ability, imporved battery life, tweaks to make your Streak do more than you are used to, quick response from the devs for daily issues etc.

    Custom ROMs dont come in .pkg format as do OTA from Dell, but custom ROMs do come in .zip files, which then need to be flashed (installed) into your Streak.To make this possible you need first to install a modified image called StreakMod which would make it possible for you to install DSC. StreakMod is provided also from DSC in the pack DSC_flashme2.zip provided by (_n0p_).

    Download the DSC_flashme2.zip provided by (_n0p_) All you need is working Windows installation (32bit versions are tested) and the latest drivers form Dell installed on the PC.

    You need to download the main DSC ROM only form the links provided on the first post of DSC in XDA thread, copy it on the root of your SDcard where they can be easily accesed, or you can open a folder called DSC, and you can put there all the zip files from DSC, but remmember the place , as you will need to find those files later from StreakMod menu.


    You need to extract the content of the DSC_flashme2.zip file on any folder you like or the default folder offered by the system, DSC_flashme , but be sure to be easily accesed, you can remove the folder to any place you like after the flashing process,

    Now be sure you have charged your streak to 100% before you start installing DSC. DO NOT connect your Streak with the PC using the usb connector yet. Power your streak on and immedialty press the camera button, you will see a white screen, this is called the FASTBOOT mode "Wait for SD detect...." then you will see "FastBoot" tap on it and the streak will enter the FastBoot-Mode , you will see "Wait for USB FastBoot detect ...." wait 20 seconds then plug your usb connector to the mobile and after some seconds you will see "FASTBOOT_MODE", now you are ready to turn to your PC again and .....

    After the folder is in place, locate the flash.bat and double click on it, a windows DOS terminal will open, follow the instructions there and reboot immediatly after you see the Dell logo within seconds you need to press and keep pressed both volume butons on the side of and then you will have access to Dell menu, select the second option by using the Volume buttons to go up and down the menu, once the second choice "upgrade...." press the camera button and wait several seconds, then a Dell logo with a triangle will appear, that is the StreakMod menu, try navigating the menu up and down with the volume buttons, and once second choice there " update using zip" is highlighted, press the camera button , then you will go to a another menu , where using the same volume buttons , you can navigate thru to find the place where you uploaded the DSC zip file , then once highlaghted press the camara button again and you will see the DSC_script doing its job, once finished , you need to press back button, and go back to the first menu where you select reboot. Once streak is rebooting agian keep your fingers press on both volume buttons, where you will see the Dell menu, now chose the first option, factory reset,streak will reboot by itself, let it reboot , you will see Dell logo, and then the DSC boot animation, wait now patience, if you have done all the above , nothing can go wrong, wait a little , then wait some more , bcs a lot of files is being genearated for first time, etc so this process can take some time, 15 minutes, if you have seen the DSC boot animation, it means everything is ok, otherwise you need to repeat the process again.
    --
    Manual flashing instructions:​
    Find and download 407 Olleh ROM and corresponding recovery.
    Rename 407 .pkg to update.pkg. Rename 407 recovery to recovery407.img
    Get StreakMod recovery. Rename StreakMod recovery to recoverysm.img
    Put recovery407.img and recoverysm.img to folder with your fastboot tools.
    Download DSCv1.0.zip.
    Download latest update - updDSCv1.1.zip.
    Connect Streak to PC.
    Copy update.pkg, DSCv1.0.zip and latest DSC update to SD card of your Streak.
    Reboot. When Dell logo appears, press and hold Camera button. Select FASTBOOT.
    Issue this commands using Windows command console (cmd.exe) - you should do a "cd PATH_TO_FASTBOOT_TOOLS%" first.
    Code: 
    fastboot -i 0x413c flash recovery recovery407.img
fastboot -i 0x413c reboot
    Don't close the command line.
    Streak will reboot, now on Dell logo press and hold both volume buttons.
    Select "2. Update...". Be patient while 407 ROM is flashing. Note that volume buttons are used as cursor arrows and Camera button as Confirm.
    After 407 ROM is installed, Streak will reboot. Press and hold Camera button again when Dell logo appears. Select FASTBOOT.
    Issue this commands using Windows command console.
    Code: 
    fastboot -i 0x413c flash recovery recoverysm.img
fastboot -i 0x413c reboot
    Streak will reboot, now on Dell logo press and hold both volume buttons (this time we have StreakMod recovery installed).
    Select "2. Update...". StreakMod recovery will boot.
    Flash DSCv1.0.zip.
    Flash latest update (updDSCv1.1.zip).
    Reboot, on Dell logo press and hold both volume buttons. This time select "1. Factory reset"
    You set!

    --
    Help us, sending bugreports:​
    Connect Streak to PC.
    Dump log (i assume if you have flashed this ROM, you know what "adb" command is):
    Code: 
    adb logcat -d >mylog.txt
    If bug causes Streak to reboot, do this:
    Connect Streak to PC, issue command:
    Code: 
    adb logcat >mylog.txt
    and try to reproduce the issue. (adb will automatically disconnect on reboot).

    Send me "mylog.txt" or attach to this thread.
    My e-mail is n0p[at]ukr[dot]net
    I don't promise immediate responce, but this log would be very helpful.
    Thank you for attention.
    View
    24
    _n0p_
    _n0p_
    DSC v2.0

    DSC v2.0
    Since 1.0:
    Kernel changes:
    Optional UX impovement. Kick CPU on device resume for faster wakeup. Check DSConfig. Reported to cause instability, so check yourself if it works ok for you.
    Added timeout and power mode control parameters to wifi driver - dhd_pm_active and dhd_pm_suspended. DSConfig.
    Rewritten power button dejitter code.
    Switched to Linaro toolchain (thanks abauer and hunderteins!) and added compile-time optimizations.
    Better Mugen Power percent calculation.
    Configurable voltage levels. (DSC CPU Voltage configuration)
    Disabled baseband version check.
    Used ext4 driver for ext2/3 filesystems.
    Advanced routing enabled.
    Added SmartassV2.
    Conservative governor hacks - faster response, less lag.

    System/Framework changes:
    ICS Animations and Notification Toggles by wway. And i've revamped Brightness button for full functionality.
    DalvikVM from CyanogenMod (2.3.7)
    Rooted with SimpleSU
    Great Phoenix bootanimantion by Ace38
    QuickPanel Reboot can reboot to fastboot and recovery (hunderteins).
    MTD-Utils included.
    crond activated (tab in /system/etc/cron/root).
    ntpd syncs time on boot.
    Better portrait mode (no or almost no firstlock problem). DSConfig.
    DroidWall script symlinked to init.d for leaks elimination.
    Busybox updated, installer removed.
    Optional Phone process priority increase. DSConfig.

    Application changes:
    DSC Utils:
    DSConfig heavily updated. Run it, take a look at options!
    DSC CPU Voltage - set your own voltage levels.
    DSC Gain - alter sound driver gain levels.
    DSC Mugen Power - use your Mugen battery with correct percentage.
    DSC SimpleSU ACL - control root access. Freeze/Thaw apps as bonus feature :)
    Camera now has Torch(flashlight) mode, Jpeg quality set to 100 instead of 75.
    SMS 2 MMS conversion treshold can be changed.
    Zeam updated to 3.1.10 (number of vertical app drawer columns altered to 5/7), got nice folders and app drawer animation looks better with ICS anims.
    Fonts updated.
    Internationalization updated (EXPERIMENTAL) - included Arabic, some other (sorry, have no time to update the list). Indonesian locale switched from in to id, Hebrew - from iw to he. Can't get Hindi to work - that's whose unresolved symbols in list.
    Timezones updated.
    Put back optional SetupWizard, as i cannot find that privacy settings.

    Included third-party apps (can be uninstalled):
    Flashplayer, CPU Master Free, AutoReassociate, DSPManager, Ghost Commander, Google Maps, Youtube, DroidWall Free, Swype, DSC Wallpaper pack, SuperDim, System Panel Lite, ClockSync, FM Radio (by hunderteins).

    For faster flashing - flash PDroid right after ROM to skip cache rebuilding twice

    --
    http://n0p.8bit.fm/streak/DSCv2.0-rel.zip
    PDroid patch (lightweight privacy solution, you'll need to install the control app from Play):
    http://n0p.8bit.fm/streak/PDroid-v1.31-DSCv2.0.zip
    --
    Mirror:
    http://www.littlemaruko.com/Nopteam/DSCv2.0-rel.zip
    PDroid:
    http://www.littlemaruko.com/Nopteam/PDroid-v1.31-DSCv2.0.zip
    --
    If you using 2.0 open test, you need only this quick update:
    Link
    Mirror
    View
    20
    _n0p_
    _n0p_
    DSC v2.0.1

    DSC v2.0.1
    A mostly cosmetic microupdate.
    --
    DSC Utils fully exit on back button press (except DSConfig)
    Long forgotten option enabled in DSConfig - should Phone follow orientation sensor or not (Rotation limit).
    DSC SimpleSU ACL updated (russian translation, mounts /system in rw mode before changing access list and to ro after).
    --
    http://n0p.8bit.fm/streak/updDSCv2.0.1.zip
    Mirror:
    http://www.littlemaruko.com/Nopteam/updDSCv2.0.1.zip
    --
    WBR,
    Sergei
    View
    19
    _n0p_
    _n0p_
    v1.0 Release post.

    v1.0
    --
    What is done since 0.7 release:
    • Further work on Phoenix kernel. Lite version included in ROM. Read more about this project.
    • New DalvikVM (from CM7)
    • More sounds.
    • WiFi changes (reverted binaries to 407)
    • Optional patched WiFi driver (by hPa) to increase stability at cost of battery life.
    • Refined notification led mod by watch_mania. Now lights menu button after a missed call.
    • USSD requests work! hunderteins hack.
    • DSC Gain tool. Controls audio driver parameters.
    • Enabled init.d.
    • Zipalign script added.
    • USB automount with OTG cable.
    • VoiceDialer added.
    • WiFi all-channels hack by hunderteins.
    • Settings app hacked to allow saving WiFi autorization mode.
    • Setup wizard disabled.
    • Removed SmartVolume. No longer needed.
    • DSConfig (DSC ROM configuration tool)
      Allows you to change with single reboot:
      DPI.
      Video driver mode (for that quick whitescreen preview fix).
      CRT Animation.
      Landscape/Portrait mode.
      Notification led mod.
      Vibration on reboot.
      WiFi driver.

      Forgive me, if i've forgotten someone.
    --
    Included as user apps:
    Busybox, ClockSync, CpuMaster Free, DroidWall, DSC Wallpapers, Equalizer, Flashplayer, Ghost Commander, Google Maps, RootDim, Swype, SystemPanel Lite, WiFi Reassociate, Youtube.
    --
    Remember, Streak'll auto reboot after first installation / Dell factory reset.
    --
    Download links:
    http://n0p.8bit.fm/streak/DSCv1.0.zip
    link @ khoacoi's file hosting:
    http://www.littlemaruko.com/Nopteam/DSCv1.0.zip
    --
    Update 0.7x -> 1.0
    http://n0p.8bit.fm/streak/updDSCv1.0.zip
    link @ khoacoi's file hosting:
    http://www.littlemaruko.com/Nopteam/updDSCv1.0.zip

    26.03.2012: Voice Dialer moved to system apps.
    View

New posts