[BUILD] **Complete FroYo Bundle** FRX07.1 - Maintenance Release
- Thread starter arrrghhh
- Start date
Have you ever run Android on your DIAM?
For example, if your card is partitioned you need to put "no_partitions" in your startup.txt.
You can also try formatting your internal storage (4gb) with the HP Tool. FAT32.
files.xdandroid.com seems to be down.
Try the .cz mirror.
http://htcandroid.xland.cz/FRX07.1_Full_Bundle_20110901.zip
Button Commmands
Installed full bundle set and ts-calibration_blac but my HTC Touch HD buttons dont work. They just vibrate but no command. Power and volume work fine
Installed full bundle set and ts-calibration_blac but my HTC Touch HD buttons dont work. They just vibrate but no command. Power and volume work fine
Alright, I'm updating this just for Blackstone users... Enough of these posts! Give me a bit to fix and reupload.
Edit, uploading...
Edit2, uploaded, now waiting for it to mirror. Shouldn't be long now.
Edit3, it's up on the mirror... So to those having issues, download this new bundle and follow the same directions in the first post. Should work great...
Should be up on the main site/link shortly.
Edit4, done. Main site is up-to-date.
Last edited:
thanks so much arrrghhh for your great work really appreciated ,just one question if u please when i try to shut down and start again it won't let me boot from the storage card .it start direct my custom wm 6.5 that already installed in the device ,so i have to go to again to the storage card and setup the android ROM again,is there any way to keep the both ROM's working with any option to choice the boot if android or my custom ROM? and if i want to restart the android ROM how can i do that? i have no option to restart when i press the power bottom.thanks in advance for your effort.
There's currently no (stable) option to only boot Android if that's your question. It will always go back to WinMo.
Also, this build is a little older than the GB build. That one has a restart option from the power menu. Shutdown/restart has always been kinda flaky tho... shutdown would sometimes do a restart for example.
SD cards
Thanks for this Build. Running good
..but not on the sd card i want to use..the Transcend Micro SD 8GB - HC
tried putting the code below in the startup.txt inside the quotes with a space separating.. and still not change "SD card waiting.." error
"msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave"
But thought I would post that my San disk 2Gb is working. Hope this helps someone.
Thanks for this Build. Running good
..but not on the sd card i want to use..the Transcend Micro SD 8GB - HC
tried putting the code below in the startup.txt inside the quotes with a space separating.. and still not change "SD card waiting.." error
"msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave"
But thought I would post that my San disk 2Gb is working. Hope this helps someone.
SD card - issues with large cards (8GB and up)
I think I have figured this SD card issue out:
Cards that failed to boot: 2 brands of 8GB, one was a brand new Transcend.
Cards that worked: a 2GB SAN disk and a brand new 4GB Transcend
So it appears (in my experiance) that SDcards of 8GB and up seem to not work and that smaller cards (4Gb and down) do work.
(forgive me if this was already mentioned, i didnt find anything.)
I think I have figured this SD card issue out:
Cards that failed to boot: 2 brands of 8GB, one was a brand new Transcend.
Cards that worked: a 2GB SAN disk and a brand new 4GB Transcend
So it appears (in my experiance) that SDcards of 8GB and up seem to not work and that smaller cards (4Gb and down) do work.
(forgive me if this was already mentioned, i didnt find anything.)
I want to install Android on an other Touch HD, but when it boot cames "Waiting for SD Card".
I have try it with an 4 GB and 8 GB - the same error. With my SD-Card from my other HD it
works. I read that it must be this in the Startup.txt, but it´s not working:
EDIT:
I have found another SD and with this it works.
Transcend 8 GB SDHC - Class 6 = not working
SanDisk 8 GB SDhc - Class 4 = working
I have try it with an 4 GB and 8 GB - the same error. With my SD-Card from my other HD it
works. I read that it must be this in the Startup.txt, but it´s not working:
Code:
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsaveEDIT:
I have found another SD and with this it works.
Transcend 8 GB SDHC - Class 6 = not working
SanDisk 8 GB SDhc - Class 4 = working
Last edited:
My last question (i hope so ):
Is there any solution for my "Battery Problem"? My Battery goes very fast down/empty.
Is there any Solution or Trick? At Windows Mobile i have "Standby" 5 Days, at Android
1 Day - when i use my Touch HD with Android it was in 2 or 3 hours empty.
Thank you for an answer.
):Is there any solution for my "Battery Problem"? My Battery goes very fast down/empty.
Is there any Solution or Trick? At Windows Mobile i have "Standby" 5 Days, at Android
1 Day - when i use my Touch HD with Android it was in 2 or 3 hours empty.
Thank you for an answer.
My last question (i hope so
Is there any solution for my "Battery Problem"? My Battery goes very fast down/empty.
Is there any Solution or Trick? At Windows Mobile i have "Standby" 5 Days, at Android
1 Day - when i use my Touch HD with Android it was in 2 or 3 hours empty.
Thank you for an answer.
Sounds pretty normal unfortunately.
Turning off data when not in use helps a lot...
Is there anyway for us to reboot the phone without it going back into Windows again?
Or do we have to run from Haret every single time?
---------- Post added at 01:48 PM ---------- Previous post was at 01:38 PM ----------
Apologies, just saw a post on the prior pages about my original query.
Thanks!
Or do we have to run from Haret every single time?
---------- Post added at 01:48 PM ---------- Previous post was at 01:38 PM ----------
Apologies, just saw a post on the prior pages about my original query.
Thanks!
clock slows down, while charging
Hi,
I've installed Froyo, works flawlessly compared to WinMo. Battery drainage is a littlebit quick, that's a pitty.
To avoid lack of battery power, I charge the phone nightly. Recently I discovered that my clock is running slower, when charging the phone. It can increase to 1,5 hours in 6 hours of charging. Is this normal, or do I have to change a setting??
It's very annoying, because I use my telephone also as an alarm clock.
Hi,
I've installed Froyo, works flawlessly compared to WinMo. Battery drainage is a littlebit quick, that's a pitty.
To avoid lack of battery power, I charge the phone nightly. Recently I discovered that my clock is running slower, when charging the phone. It can increase to 1,5 hours in 6 hours of charging. Is this normal, or do I have to change a setting??
It's very annoying, because I use my telephone also as an alarm clock.
Hi,
I've installed Froyo, works flawlessly compared to WinMo. Battery drainage is a littlebit quick, that's a pitty.
To avoid lack of battery power, I charge the phone nightly. Recently I discovered that my clock is running slower, when charging the phone. It can increase to 1,5 hours in 6 hours of charging. Is this normal, or do I have to change a setting??
It's very annoying, because I use my telephone also as an alarm clock.
If you bothered to read the FAQ, you'd know there's a way to resolve the clock drift.
Disable data when not in use, helps with battery life.
Whoops, I'm so sorry. I haven't done that at all
I think clock sync will do the trick.....Thank you for your quick response
I think clock sync will do the trick.....Thank you for your quick response
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
43FRX07.1 is here!!
This is a maintenance release - basically taking the newest components to make a completely up-to-date (as of Sept. 1).
Quite a lot has changed since FRX06 - the install process hasn't really, but be sure to read the changelog in the next post and the caveats in post #3!
<<<This is a link to the... FAQ Click it!!>>>
I have created a complete bundle of FroYo with a stable kernel from GIT (August 19 / 1348), and rootfs from GIT (Sept. 2).
Please, feel free to DONATE to the XDAndroid project!
Every little bit helps!
Directions:
1. Download the full bundle (zip). (Updated September 1 2011)
If instead you just want the system.ext2 (zip) (Updated July 15 2011) file by itself... Don't download this if you're not sure! Grab the full bundle!
2. Extract it. You’ll see a folder, FRX07.1, copy its contents to the root of your SD card. If you want to run Android from a folder instead of all the files on the root of the card, follow the steps below.
3. Go into the STARTUPS folder. Grab the appropriate startup.txt for your device (if you don't know what device you have, you should read the FAQ), and move it to the root of the card (or where you run haret.exe from. If you want to change the location of the build, put a rel_path= statement in the cmdline section of the startup.txt. Mine is located two folders deep on the SD, so my rel_path=Androids/TP2Ref)
4. Screen calibration - you have three choices:
- Re-use an old ts-calibration file if you have it and you know it's good.
- Download the ts-calibration.zip file and extract it to where you put the rest of the files (root of SD or in a folder - make sure it all stays together!)
- Manually calibrate - boot with no ts-calibration file and watch the boot process - you'll be asked to hit 5 points to calibrate the screen. If you have issues calibrating, try an older kernel (1225 works well) Once you have the calibration file hold on to it (make 15 copies if it's a good one ), reboot & go back to the newest kernel!
6. Run haret.exe.. Profit!
Let it settle out on the first boot. Many have reported they had to reboot basically because it was so slow - if you let it sit for about 10 mins so the media scanner can go thru everything, etc. it will be much more pleasurable experience. If you want adb in and watch the processes via top, you'll see why the phone seems so slow - there's lots of background processes cranking because this is the first boot.
Troubleshooting:
Please read the... FAQ
If you have any issues with the kernel, feel free to change it:
There are some devices that are having issues with the newest kernels. Please see the kernel autobuild service to get archived kernels. Once you download a replacement kernel, go to where you run haret.exe from - remove your old zImage/modules-xxxxx.tar.gz. Take the new zImage/modules-xxxxx.tar.gz and replace the old ones, same folder - where you run haret.exe from. Make sure the ‘zImage’ is named just that. Do not rename the modules file, do not extract it - should be in .tar.gz format.
See Incremental Updates for more information on updating the kernel and other components.
Random issues can often be solved by forcing the system to create a new data.img. If you're worried about losing data (all user data is stored in the data.img!!), Titanium Backup works quite well. If you wish, you can rename the data.img to something else, and let the system create a new one - just to see if it resolves your problem.
Similarly, if you wish try formatting your SD card - I prefer to use the HP Tool - do a full format, FAT32.
Even though this build is considered fairly stable, you are more than likely going to run into issues. The next post will address issues particular to this build - PLEASE READ THESE before asking questions! Feel free to post questions in this thread, I will do my best to address them. Big thanks to stinebd for releasing the system image, and of course the other developers for their hard work on making these kernels available.9Caveats:
- BT - works! But audio doesn't route. See this thread if you're feeling adventurous and want to play with/don't mind using some unstable/incomplete code...
- Audio stutters every 10sec. The only fix I've heard is using a kernel from G3rmo (unfortunately it is old), or
Which kills the [battery] process. I'm sure this will have negative effects on the battery meter/battery life...Code:
su kill -9 28 - SD Card not working...? "Waiting for SD Card" appearing on boot...? Try putting this command in your startup.txt
See gummbah30's post reminding us of these commands.Code:
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave - SD Card has partitions? (If you used a non-XDAndroid build the answer is YES) Then you need to add "no_partitions" to your startup.txt. Between the quotes on the set cmdline line. Do not put it on its own line, it goes in between the quotes! Make sure there is one space between each item.
- Front buttons messed up/wrong?
You can use my rootfs which incorporates g3rm0's layout.This custom rootfs is no longer necessary, I have committed the changes so you can use the autobuild rootfs (in conjunction with physkeyboard=blac in your startup.txt)! - Keyboard tiny/unusable? Either change the IME (long press on the input box) Get rid of it! I've heard "Hackers Keyboard" is a good alternative - many options. There's also "Better Keyboard", Swype, etc... Side load the APK using AndroidApps, adb install, etc.
6
I didn't have any issues with sleep/wake on current kernel and build (there is pm.sleep_mode=1 in my startup.txt but it's probably irrelevant). Camera can take stills but not video - known bug.
If you follow this tutorial you should be able to build your own system image with minimum effort. However there are few things to note:
1. You need to use Ubuntu 10.04. It won't work on older version and there are additional steps in Ubuntu 11.10 (not covered by this tutorial).
2. First build takes absurdly long time. It was something like 10 hours on my Linux VM. May be faster on quad-core native Linux machine but still it will be hours.
3. Using OpenJDK may not work! It's better to use latest sun-java6-jdk.
4. In step "Build Dependencies" you need to do everything as described with two exceptions.
a) signed-dream_devphone_userdebug-ota-14721.zip is no longer available on HTC Developer Center - google it.
b) HW3D driver is outdated. Google hw3d-20111216.zip.
5. Last thing to do before build is add booksphone.apk manually because it's missing from the latest gapps package. Google it and place under vendor/xdandroid/msm/proprietary.5stinebd's Changelog:
stinebd said:
Layman's Changelog
(As in, the changelog I wrote)
FRX07.1 Changelog:
- RHOD - all buttons on the front no longer wake the device. Only the power button wakes the device now.
- Updated to the newest RIL
- hyc's modified libs for video now baked in - *most* HQ YouTube videos (and other HQ videos) should finally work!
- RHOD & TOPA - Userland (Android) now controls the LED by default now. If you need to debug sleep, you will have to change the behavior manually.
- Facebook sync should now work, out-of-box.
FRX07 Changelog:
- Updated RIL (thanks hyc!) - this covers many different bugs that were in the old RIL - I'm only going to cover the major ones...
- CDMA now works correctly (for the most part). force_cdma (and north_am_dialing) is now deprecated (not needed/ignored!)
- You can boot with a SIM in on a CDMA device and choose your GSM or CDMA on the fly under Settings.
- Location based on towers now works on CDMA.
- 1xRTT now displays correctly, but I never seem to get EVDO Rev.a... I always get 0. This is represented by a 3g icon, as this is what the Android framework provides.
- Full MMS support! Please see this page for configuration instructions. Will need help fleshing out the list of carriers folks!
- Spotty service, switching towers, etc should no longer cause the dreaded SoD (Sleep of Death) condition!
- (Basic audio) 3.5mm support for RHOD400/500
- Droidwall works out of the box now
- Keyboard backlight now fades in/out
- Gallery3D back in! Picasa Web Sync comes with it
- A couple new apps added to AndroidApps folder:
- rpierce99's app GetLogs
- Titanium Backup
3
It's also provided in the AndroidApps/Other folder - it has no ad's.
ok if i mix arrrghhh's rootfs and mod with g3rm0 patched kernel my phone wont finish its android boot.... again....
if i use both g3rm0 kernel and roofts with arrrghhh's FRX07 build it freezes in the android boot again
i tried an older version of his kernel and it still didnt work with FRX07 .... temprimental mod isnt it
what is a ROOFTS???? whats the difference between yours and this guys?
could arrrghhh add this key formating from his roofts into urs?
EDIT: Tried the latest g3rm0 kernel again after a few restarts and its working playing music much better, occasional hickup but nothing as bad
rootfs changed quite a bit for FRX07. Not sure why it would cause issues with g3rm0's kernel...
This "music patch" literally disables the [battery] process... while it's a noble effort to fix BLAC's music woe's, it is not an acceptable patch for mainline kernels... sorry. Someone's actually going to have to figure out what in the battery code is causing the issue for BLAC's.
I think that's just part of Zeam launcher. You can use any launcher you please on FRX07 - I prefer ADW myself. All on ze Market.
Yea, emwe hasn't been able to fix this bug... sorry!
New posts
-
-
Features disabled on fastboot and bootloader. How do I enable them?- Latest: mayberandomparable
-