[2017.08.02] DSLR Controller v1.05

Search This thread

daveid

Senior Member
Jan 5, 2009
1,891
356
Samsung Galaxy S21 Ultra
i try many time but not work, (7D, 500D) because i am missing USB HOST REQUIRED!!! ha, i buy the cable now. wait for 2 week. thank for tell me NEED USB HOST! =)

What are you talking about? It is mentioned just about every other post in this thread what the requirements are for this to work. And on the Market description. What more do you want?
 

toes2

Member
Nov 28, 2010
23
1
Just got back from vacation to find that there's an update and it is now largely working with my Transformer and 1Ds mk III - marvelous! Thanks a lot Chainfire.

It doesn't allow image capture with the 1Ds-III when in any continuous-shooting modes (which you clearly note is likely on the devices page as it's a VxWorks camera). It would be great if the app allowed you to change the shooting mode to single-shot, but the shooting-mode button isn't active. Is that a VxWorks related issue that you know about and can't be fixed?

Thanks for the work you've done with this so far. Great progress! And have a relaxing vacation :)
 

Chainfire

Moderator Emeritus / Senior Recognized Developer
Oct 2, 2007
11,452
87,862
www.chainfire.eu
Just got back from vacation to find that there's an update and it is now largely working with my Transformer and 1Ds mk III - marvelous! Thanks a lot Chainfire.

It doesn't allow image capture with the 1Ds-III when in any continuous-shooting modes (which you clearly note is likely on the devices page as it's a VxWorks camera). It would be great if the app allowed you to change the shooting mode to single-shot, but the shooting-mode button isn't active. Is that a VxWorks related issue that you know about and can't be fixed?

Thanks for the work you've done with this so far. Great progress! And have a relaxing vacation :)

Can you take a screenshot of the issue ?
 

toes2

Member
Nov 28, 2010
23
1
Can you take a screenshot of the issue ?

Glad to.

DSLRController-066-ss-1.jpg
 

Fraction

Senior Member
Aug 23, 2008
230
5
Bergen
I have a SGS 2, 2.3.4 i9100XXKH3, Modaco custom Rom for SGS2 Gr5 XXKH3. But its not compatible.. Any solution. Which ROM is recommended for this?
 

Fraction

Senior Member
Aug 23, 2008
230
5
Bergen
Please have a read in on the starting post of this topic and you will find your answer.
At the moment the only PHONE that is compatible is the Samsung Galaxy S2, with the 2.3.4 KG series firmware or newer.

DSLR controller has been tested with the following hardware:

- Samsung Galaxy S2, (KG1/2.3.4 firmware or newer), USB Host cable, eBay: "i9100 usb host"

  • I have the KH firmwire. If they go next in the alphabet for each firmwire, H comes after G.
  • I have the 2.3.4 release.
  • I have the USB Host cable.
 

hkiyany

New member
Aug 23, 2011
1
0
issue with s2 installation

the problem is i can't install it on my s2 2.3.4 saying not compatible with my device? any one can help?
 

hoodred

Senior Member
May 21, 2011
175
86
no support for 1ds MK iii

Acer iconia tab , 5d mkii and 1ds mkiii
Work with 5d mkii but does not do anything with 1ds mk iii.
Since 1ds mkiv has not been release yet the 1ds mk iii still canon no 1 line camera however this apps does not even support it.
It can only do Live View with the 1ds (by enabling live view on the camera).

Another suggestion.
to have option where to store the images since acer has two usb port ( you can use external hard drive).
User friendly interface is another usefull feature.

If this apps can do tether like canon eos utility (remote shooting and iame preview) this app will be the winning combination.
 

expostfactor

Member
May 15, 2010
7
0
loving this app using on SGSII @ the minute until usb adapter comes for transformer. I was using onone's app on iphone but think this is far better and is still only in beta!

** Feature Request **

Would adding motion capture be a possibility either using dslr or android device's camera as the trigger

Cheers for a top pro app
 

toes2

Member
Nov 28, 2010
23
1
Work with 5d mkii but does not do anything with 1ds mk iii.

Are you using the up-to-date version of the app? v0.5 didn't have any usefully functioning buttons with my 1Dsmk3, but most features have been working for me since v0.66.

If you are using v0.66, make sure the camera is set to single-shot shutter mode before you connect to your Android device.
 

pootle42

Member
Aug 24, 2011
12
2
Is this the right sort of cable to use?

the recommended USB host cables are a bit hard to find in the UK, but I'm hoping this together with the camera standard USB cable is the right answer....
Code:
wwwDOTamazonDOTcoDOTuk/exec/obidos/ASIN/B004APRKLS/ref=ox_ya_os_product

Can anyone confirm this one way or the other?

Also just upgraded the firmware on my S2 to KG6 using the excellent instructions here:
Code:
androidflipDOTcom/android-2-3-4-gingerbread-xxkg6-firmware-update-for-samsung-galaxy-s2

(sorry about silly urls' tryingo to find some way of getting the info through the site's early user filters)
 

stephandelaat

Senior Member
Mar 15, 2010
68
7
Tilburg
@ Chainfire

Congrats this is a very nice app! Is it also possible to cycle through taken shots and is bulb mode supported?

I'm also waiting for Nikon support! Will the final version (non beta) be more expensive?


Blij dat er van dit soort mooie dingen gemaakt worden in ons mooie Nederland.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 91
    In an effort to de-duplicate a lot of information, I have moved the bulk of it to the DSLR Controller website. This thread still remains the place to get support, discuss, and ask questions, though!

    DSLR Controller was the first and remains the best app to fully control your Canon EOS DSLR from your Android device, through USB cable or Wi-Fi connection. No computer or laptop required, no root required, only a compatible mobile device, a compatible camera, and if connecting through USB, the right cable.

    We strongly suggest you read up on the website ( http://dslrcontroller.com/ ) about what DSLR Controller can do, how it works, and how to use it, before purchasing. The website contains a wealth of information you should know before using.

    Not all devices are compatible, especially if you want to use a USB connection. For a free app you can use to test compatibility, see the "Remote Release" app ( http://market.android.com/details?id=eu.chainfire.remoterelease ). If you need a refund, go to our website ( http://dslrcontroller.com/ ) and follow the instructions in the FAQ entry. We cannot process refunds through email.

    Usage notes, feature lists, device compatibility lists, changelogs, FAQs, can all be found on our website: http://dslrcontroller.com/

    Most questions should go to the support and discussion thread at XDA-Developers.com:
    http://xdaforums.com/showthread.php?t=1202082


    Features

    Features include but are not limited to:

    - Live View
    - Auto Focus (tap Live View)
    - Manual focus adjustments (in AF mode)
    - Histogram
    - Zoom control
    - Grid and aspect ratio overlay
    - Bulb capture
    - Continuous capture
    - Image review (+ follow shot, gallery)
    - Image filters (peaking, contrast, channel mask, grayscale, 4 modes/filter)
    - Video recording
    - HDR/Auto Exposure Bracketing
    - Focus Bracketing (incl. HDR)
    - Focus A-B
    - Mirror Lockup support
    - Timelapse (incl. HDR)
    - Wi-Fi Passthrough
    - Extensive modification of settings
    -- Shutter speed
    -- Aperture
    -- ExpComp and Bracket
    -- ISO speed
    -- Auto-Focus Mode
    -- Focus and Zoom area (tap-and-hold Live View)
    -- Picture Style
    -- Drive Mode
    -- White Balance
    -- Color Temperature
    -- Auto-Lighting Optimizer
    -- Metering Mode
    -- Image and video quality and format

    Available options depend on the mode you have your camera set to (M, Av, Tv, etc) and camera model. Refer to the website ( http://dslrcontroller.com/ ) for further details.


    Supported Android devices:

    If you are connecting using Wi-Fi, virtually all modern Android devices are supported (your camera needs Wi-Fi support, though). If you are connecting over USB, your device needs USB host support - most recent devices do. Please see the 'Devices' section on our website ( https://dslrcontroller.com/devices.php ) for further information.

    If your camera only supports USB, you can modify a TL-MR3040 to provide a Wi-Fi connection ( http://dslrcontroller.com/guide-wifi_mr3040.php )


    Supported Canon EOS models:

    Newer cameras than listed below are usually supported.

    Full support:
    - 1D Mark IV
    - 1D X
    - 1D X Mark II
    - 5D Mark II
    - 5D Mark III
    - 5D Mark IV
    - 5Ds(r)
    - 50D
    - 500D
    - 550D
    - 6D
    - 60D
    - 600D
    - 650D
    - 7D
    - 7D Mark II
    - 70D
    - 700D
    - 750D
    - 760D
    - 80D
    - 1100D
    - 1200D
    - 1300D
    - 100D

    Limited support:
    - 1D mk III
    - 1Ds mk III
    - 30D
    - 40D
    - 400D
    - 450D
    - 1000D

    No support:
    - pre-2006 models
    - EOS M mirrorless devices (work in progress)


    Let us know which hardware you are using with DSLR Controller!
    10
    Must-read information

    Screenshots and video:
    http://dslrcontroller.com/about.php

    Download, BETA usage notes, and changelogs:
    http://dslrcontroller.com/download.php

    Table of supported Android devices and Canon EOS DSLRs:
    http://dslrcontroller.com/devices.php

    FAQ:
    http://dslrcontroller.com/faq.php
    8
    I am a professional architectural photographer and have adopted your DSLR app into my workflow. Thank you for the great design and amazing functionality. It is a pleasure to work with*.

    I would like to know what the future holds for DSLR Contorller. I noticed you are not very active on this forum (last post on 2/26/2015), but wanted to encourage you to keep on developing because I, We need it!!!

    ...
    .

    DSLR Controller was originally built for Android 2.x years ago, and a lot of things have changed both in the camera world as well as the mobile world. Despite bolting on many improvements, the code shows its age. To take it to the next level and get everything I want into it (customizability, compatibility, portability, speed, etc), a lot of the core needs to be changed, the UI needs to be changed (if not in appearance or functionality then certainly how it's been coded), etc. It pretty much comes down to not just overhauling major parts, but completely redoing it from scratch, and rebuilding it as envisioned from the ground up.

    This brings with it a number of issues. It is a lot of development time (and thus money) investment up front, of which you will see no results, until it is almost done. In the mean time, you can't really release anything that isn't up to par with the current version of DSLR Controller, and you can't just replace the current version as old users/devices may no longer be compatible, stranding paying customers. A lot of additional equipment needs to be gotten and tested with to ensure compatibility and portability (remote and end-user testing isn't really workable with apps like these). Not to mention that DSLRs are pretty much doomed, and this is definitely being reflected in daily sales.

    The past year hasn't been very good on a personal level, which isn't your problem of course, but it is one reason for the lapse in development of certain apps. This one adds to the fact that in light of the above, it feels like a waste of resources to spend a lot of time on improvements in the current app. There have been talks with a team (from a big brand in the camera world) to take over the IP, pretty much solving the resource problem, but ultimately that fell through, after the talks taking up a large part of my time for months.

    Also, I know it seems like DSLR Controller has generated a lot of funds, but spread out over the years its been available, subtracting equipment costs, corporate taxes, wage taxes, etc, you wouldn't be able to hire one(!) half-competent coder for the money left at today's going rates, not to mention the risks involved with hiring people. Even though I do get paid and get all these toys to play with, wanting to build it has always been a large part of this, as there are definitely more profitable ways to spend the time. At the same time having to compete with $300 equipment, and people still complaining about the $8 price.

    This app is also a complete nightmare to support, as by far the bulk of the connection issues are not due to the app itself, but due to camera configuration, phone configuration, hardware incompatibilities, firmware incompatibilities, etc. That is, excepting the case where DSLR Controller just hangs, which sometimes (but definitely not always) is an issue with the app. Not to mention the droves of questions and reported issues by people who simply don't understand how their cameras work.

    All of that being said, I do believe there may be a business case where a rebuild with additional features and support for Nikon and/or Sony and/or (insert other brands here) and other OSs like Linux, iOS, OS X, Windows, etc using a shared core may at least break even. That is, providing I can find competent developers to do it (as there is no way I can pull this off by myself), and finding said competent developers with at least somewhat relevant skills might in fact be the biggest problem to solve. Still, even in the best case scenario, I don't believe any work will get started before end-of-summer.

    Don't mistake the lack of visible activity for lack of interest. What to do with DSLR Controller and how to get there is something I consider every day, as in the end, it's still the app I've enjoyed most developing over the years. But if the solution means spending more resources updating the current app, developing a new one, or investing funds to get a whole new company off the ground with a handful of people to cover both major brands and major OSs - that I don't know yet. But I do hope to have an answer to that sooner rather than later.

    (this post was written in a rush as I need to run for another appointment but I didn't want to leave this unsaid, so if it's jumping here and there and not fully coherent, that's why)
    6
    Hey Chainfire, I was wondering if there was an ETA for the next update? I know asking such things is never liked, Im not looking for a hard date just a rough idea and if there is anything else we can do to help?

    After next week I have three weeks reserved for exclusive DSLR Controller work, if that doesn't finished the upcoming update, I'd be surprised :)
    5
    The price will go up once v1.0 is reached, but the upgrade is free for those who have this BETA???

    Why can't I see free version?

    Because it's good software and the developer deserves to get paid. Beta doesn't mean it's not valuable, it means that the software isn't very mature or well tested. if you want it now, you pay. If you want to pay once it's well tested and proven then wait.

    Either way, quit your sniveling people. This is an AMAZING deal at that price. If you can afford a DSLR and know how to use it, you can afford 10 times this and would gladly pay it. If you think otherwise, you likely don't need this software to begin with and have nothing to complain about.