RC Camera
~~~~~~~~~~~
version 2.1 Freeware
© 2009-10, Real Colonel
IP cameras monitoring software for Windows Mobile 6.x.
Download: rccamera21.zip
Application uses a jpeg-mode of a camera (to reduce the traffic).
The communication with the camera is accomplished by the use of CGI-commands.
The definite commands are set in the camera working profile. Included profiles allow
the communication with TRENDnet, AXIS, Edimax, Ipux, Panasonic, D-Link
and Linksys cameras.
The ability of setting user's profiles, let the application be set for any* IP-cameras,
supporting CGI-commands.
To set the connection to the camera up one should:
1. Fill in the parameters of your camera, choosing the ready
profile or setting a new one ("Menu/Settings" menu point).
2. Check them up ("check" button).
3. Add the new camera to sources list ("add" button).
4. Save the settings ("OK" menu point).
5. Tap on the menu point "Start" in the main window.
The basic operation can be chosen from the context menu (tap-and-hold).
A tap on the image renew it despoticly.
Double tapping on the picture switches the full-screen mode.
The folder for the saved snapshorts is set in the settings menu.
The sliding movement a finger on a screen can be use for operating a
camera's PTZ-control.
To display the program messages correctly in the localized versios of
the Windows Mobile, the resource files System_SR_ENU_wm.cab (for Compact
Framework 2.0) or NETCFv35.Messages.EN.wm.cab (for Compact Framework 3.5)
should be installed.
_
* Not all manufacturers publish information about the CGI-commands, which are used to communicate
with their IP-cameras. Probably for this reason, RC Camera could not be adapted to work with the
following cameras: SPARKLAN CAS-670W, Linksys WVC54G
_
~~~~~~~~~~~
version 2.1 Freeware
© 2009-10, Real Colonel
IP cameras monitoring software for Windows Mobile 6.x.
Download: rccamera21.zip
Application uses a jpeg-mode of a camera (to reduce the traffic).
The communication with the camera is accomplished by the use of CGI-commands.
The definite commands are set in the camera working profile. Included profiles allow
the communication with TRENDnet, AXIS, Edimax, Ipux, Panasonic, D-Link
and Linksys cameras.
The ability of setting user's profiles, let the application be set for any* IP-cameras,
supporting CGI-commands.
To set the connection to the camera up one should:
1. Fill in the parameters of your camera, choosing the ready
profile or setting a new one ("Menu/Settings" menu point).
2. Check them up ("check" button).
3. Add the new camera to sources list ("add" button).
4. Save the settings ("OK" menu point).
5. Tap on the menu point "Start" in the main window.
The basic operation can be chosen from the context menu (tap-and-hold).
A tap on the image renew it despoticly.
Double tapping on the picture switches the full-screen mode.
The folder for the saved snapshorts is set in the settings menu.
The sliding movement a finger on a screen can be use for operating a
camera's PTZ-control.
To display the program messages correctly in the localized versios of
the Windows Mobile, the resource files System_SR_ENU_wm.cab (for Compact
Framework 2.0) or NETCFv35.Messages.EN.wm.cab (for Compact Framework 3.5)
should be installed.
_
* Not all manufacturers publish information about the CGI-commands, which are used to communicate
with their IP-cameras. Probably for this reason, RC Camera could not be adapted to work with the
following cameras: SPARKLAN CAS-670W, Linksys WVC54G
_
Attachments
Last edited: