Flashing back to stock rom.

Search This thread

Monteee

New member
Oct 18, 2010
4
0
I need to repair my HD2 due to it's digitizer problems and I need to flash back to windows 6.5 and I have no idea how to do that. I was wondering which rom I should flash as my HD2 is from Hong Kong and I was wondering if I have to flash the radio back too. If someone could help me I would appreciate it.

Thanks :D
 

uli71

Senior Member
Apr 8, 2010
827
151
First of all congratualations to your first post. :D

Try this:
- take a SD <= 2GB
- download ROM from HTC homepage by entering your HD2's serial number
- connect your SD to your PC by using a card reader
- format your SD by using to FAT32
- extract your downloaded ROM file by using 7-zip or something similar
- copy the RUU_signed.nbh to your SD
- rename RUU_signed.nbh to LEOIMG.nbh
- power off your HD2
- insert the SD
- press and keep pressed volume down button while you press power on button
- release buttons after you see boot screen
- follow the instructions you see on your HD2

But, don't forget: be sure your HD2's battery is fully charged, at least > 50%!

I hope this will do the job...

... if not, because you have HSPL on your HD2:
- remove HSPL first and switch back to original SPL
 
Last edited:
  • Like
Reactions: Monteee

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    First of all congratualations to your first post. :D

    Try this:
    - take a SD <= 2GB
    - download ROM from HTC homepage by entering your HD2's serial number
    - connect your SD to your PC by using a card reader
    - format your SD by using to FAT32
    - extract your downloaded ROM file by using 7-zip or something similar
    - copy the RUU_signed.nbh to your SD
    - rename RUU_signed.nbh to LEOIMG.nbh
    - power off your HD2
    - insert the SD
    - press and keep pressed volume down button while you press power on button
    - release buttons after you see boot screen
    - follow the instructions you see on your HD2

    But, don't forget: be sure your HD2's battery is fully charged, at least > 50%!

    I hope this will do the job...

    ... if not, because you have HSPL on your HD2:
    - remove HSPL first and switch back to original SPL