hiiii all!
Thread move to http://xdaforums.com/showthread.php?p=11604686#post11604686
thanks so much!
Thread move to http://xdaforums.com/showthread.php?p=11604686#post11604686
thanks so much!
Last edited:
PPC_SHIFTPDA GINGERBREAD V3 [Kernel Tytung r1_oldcam] (09.01.11)
Working
3G / Data, Audio, Bluetooth, GPS is working and don't need to disable GPS setting now. (No 60mA battery drain issue.) (Credit to Gauner1986)
Network Location, Wi-Fi, Phone, Camera (5MP), Camcorder (720x480)
WiFi Tethering/Hotspot
USB Tethering
Installation [*IMG]
- You should have at least MAGLDR 1.11 on device.
- For installation you need to enter MAGLDR (hold "Power" button during boot)
and select "Flasher" via "VolUp" and "VolDown". Confirm key is green "Call" button.
Installation [*ZIP] Recovery
1. You should have at least MAGLDR 1.11 on device.
2. Extract downloaded zip to a folder of your choice
3. Copy contents of copy_to_sd_root (initrd.gz and zImage) to the root of your sd card
4. boot into magldr and select USB Flasher option while phone is connected to PC
5. Run DAF.exe included in the zip and follow onscreen instructions.
6. coppy "update" to storage card
7. After complete, again boot into magldr and select "Boot AD SD" option
ANDROI-PPC-SHIFTPDA-GingerBread- V3 NAND (09.01.11)[*IMG]
ANDROI-PPC-SHIFTPDA-GingerBread- V3 Recovery (09.01.11)[*ZIP]
Error happen
Read below for more information
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)
Error Description: SI flash must have all sectors full.
Info: .\RSPL\RSPL.cpp (645)
On a device the insertion isn't has reached 100 %...
On the personal computer an error
Code:Error happen Read below for more information Error Description: send partition data failed Info: .\RSPL\RSPL.cpp (802) Error Description: SI flash must have all sectors full. Info: .\RSPL\RSPL.cpp (645)
However, all works))
Same here, very fast ROM, I'm very impressed.
blinking key pad lights here too.
PPC_SHIFTPDA GINGERBREAD V3 [Kernel Tytung r1_oldcam] (09.01.11)
Working
3G / Data, Audio, Bluetooth, GPS is working and don't need to disable GPS setting now. (No 60mA battery drain issue.) (Credit to Gauner1986)
Network Location, Wi-Fi, Phone, Camera (5MP), Camcorder (720x480)
WiFi Tethering/Hotspot
USB Tethering
Installation [*IMG]
- You should have at least MAGLDR 1.11 on device.
- For installation you need to enter MAGLDR (hold "Power" button during boot)
and select "Flasher" via "VolUp" and "VolDown". Confirm key is green "Call" button.
Installation [*ZIP] Recovery
1. You should have at least MAGLDR 1.11 on device.
2. Extract downloaded zip to a folder of your choice
3. Copy contents of copy_to_sd_root (initrd.gz and zImage) to the root of your sd card
4. boot into magldr and select USB Flasher option while phone is connected to PC
5. Run DAF.exe included in the zip and follow onscreen instructions.
6. coppy "update" to storage card
7. After complete, again boot into magldr and select "Boot AD SD" option
ANDROI-PPC-SHIFTPDA-GingerBread- V3 NAND (09.01.11)[*IMG]
ANDROI-PPC-SHIFTPDA-GingerBread- V3 Recovery (09.01.11)[*ZIP]
Same here, very fast ROM, I'm very impressed.
blinking key pad lights here too.