This is a development thread, if your question belongs to general topic, please check the General topic
IMPORTANT : if you've just bought the device, and it is still under 4.2, DO NOT UPDATE with OTA. You would not be able to root the device (unless you buy an expensive cable)
STATUS
TWRP is fully working - selinux is available
On 4.2.2, Root is available via two methods : with cable improved here (great work guys) or without by using Towelroot
On 4.3, root is only achievable with the cable method : unlocking bootloader, booting recovery and flashing the supersu.zip
Recovery, root and unlock
Recovery (updated on 27/02/2015)
On bootloader, you can either :
1) boot it : fastboot -i 0x03F0 boot recovery.img (adapt to .img filename)
2) flash it : fastboot -i 0x03F0 flash recovery recovery.img (adapt to .img filename)
flashing it allows to have access to recovery directly, you need to keep pressing volume down when switching on the tab.
TWRP 2.8.1 Recovery (flashable)
HP's recovery
Rom available
MayaMod - cooked by juanig
Prerooted latest OTA Rom : 4.3-17r20-05-24 STOCK ROOTED : Thanks juanig (mirror by mrzood)
Misc
Partition infos
Data cable ref : 728141-001 SPS-Micro USB to USB - Mandatory to unlock bootloader and flash custom rom Picture
Rooting
With your bootloader unlocked (by cable), flash the supersu zip linked here
If you didn't update to 4.3, you can root with Towelroot v1 (thanks to mrzood for hosting)
once root, you can unlock your bootloader if not yet done.
Unlocking bootloader
With a cable : fastboot -i 0x03F0 oem unlock. WARNING: this will reset your tablet to factory default and loose all your data
By flashing a file, you need to be root : all info there (great work guys)
Sources
HP has released 4.2.2 source code, mirrored here
HP has now released 4.3 source code here mirrored here (thanks Scratz)
My device tree
Archives :
TWRP 2.8 Recovery (flashable)
TWRP 2.7.0 Recovery (flashable) (thanks to Juanig for testing)
CWN recovery - booting but partially working
TWRP - booting but partially working
IMPORTANT : if you've just bought the device, and it is still under 4.2, DO NOT UPDATE with OTA. You would not be able to root the device (unless you buy an expensive cable)
STATUS
TWRP is fully working - selinux is available
On 4.2.2, Root is available via two methods : with cable improved here (great work guys) or without by using Towelroot
On 4.3, root is only achievable with the cable method : unlocking bootloader, booting recovery and flashing the supersu.zip
Recovery, root and unlock
Recovery (updated on 27/02/2015)
On bootloader, you can either :
1) boot it : fastboot -i 0x03F0 boot recovery.img (adapt to .img filename)
2) flash it : fastboot -i 0x03F0 flash recovery recovery.img (adapt to .img filename)
flashing it allows to have access to recovery directly, you need to keep pressing volume down when switching on the tab.
TWRP 2.8.1 Recovery (flashable)
HP's recovery
Rom available
MayaMod - cooked by juanig
Prerooted latest OTA Rom : 4.3-17r20-05-24 STOCK ROOTED : Thanks juanig (mirror by mrzood)
Misc
Partition infos
Data cable ref : 728141-001 SPS-Micro USB to USB - Mandatory to unlock bootloader and flash custom rom Picture
Rooting
With your bootloader unlocked (by cable), flash the supersu zip linked here
If you didn't update to 4.3, you can root with Towelroot v1 (thanks to mrzood for hosting)
once root, you can unlock your bootloader if not yet done.
Unlocking bootloader
With a cable : fastboot -i 0x03F0 oem unlock. WARNING: this will reset your tablet to factory default and loose all your data
By flashing a file, you need to be root : all info there (great work guys)
Sources
HP has released 4.2.2 source code, mirrored here
HP has now released 4.3 source code here mirrored here (thanks Scratz)
My device tree
Archives :
TWRP 2.8 Recovery (flashable)
TWRP 2.7.0 Recovery (flashable) (thanks to Juanig for testing)
CWN recovery - booting but partially working
TWRP - booting but partially working
Last edited: