Galaxy Mini 2 - Install firmware by odin

o2w5n778 · Feb 15, 2013

Hi,
I have a problem with firmware installation by Odin3v1.87. This is a new phone (GT-S6500).
Odin returned:

Code:

<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6500DXXLK2_S6500DXXLK2_S6500DOXXLK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> system.img.ext4
<ID:0/007> NAND Write Start!! 
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> fat.bin
<ID:0/007> 
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!

In odin i cleared all except Auto Reboot and F. Reset Time.
In PDA i selected firmware (S6500DXXLK2_S6500DXXLK2_S6500DOXXLK2_HOME.tar.md5).
I don't know what is wrong.
Kies is turned off, antivirus too.
Help me, please!

dheeraj (dhlalit11) · Feb 16, 2013

the operation got failed

try different firmware although the md5 was ok which means firmware is not corrupted

Galaxy_Rohit · Feb 16, 2013

You should have placed that file under One Package field instead of PDA.(AT YOUR OWN RISK).

Sent Via XDA™ Premium

o2w5n778 · Feb 16, 2013

Galaxy_Rohit said:
You should have placed that file under One Package field instead of PDA.(AT YOUR OWN RISK).

Sent Via XDA™ Premium

I have not "one package" field in my Odin3v1.87.
From what I know, Odin for Galaxy Mini 2 (GT-S6500) have not One Package option.

Galaxy_Rohit · Feb 16, 2013

Tick one package option on the same Odin screen (below com port mapping) & then you'll see its field active.

Sent Via XDA™ Premium

o2w5n778 · Feb 16, 2013

Galaxy_Rohit said:
Tick one package option on the same Odin screen (below com port mapping) & then you'll see its field active.

Sent Via XDA™ Premium

There are only Re-Partition, Auto Reboot, F. Reset Time, Flash Lock, Phone EFS Clear, Bootloader Update, but there is nowhere One Package field.
I can't send a screenshot because I have less than 10 posts.

Galaxy_Rohit · Feb 16, 2013

I wonder...!!

coz the single firmware file of extension ".tar.md5" is flashed via one package. Maybe you should use higher versions of Odin.:sly:

& I think you are trying to flash gingerbread so it also has a SS.dll file along with it, right!!

Sent Via XDA™ Premium

---------- Post added at 10:37 PM ---------- Previous post was at 10:16 PM ----------

Yes I found it!! One package ticker is there(1st option) in higher Odin versions coz I saw it in Odin v4.38 (dunno if it's compatible with ur phone). Once you tick that, then One Package field becomes active. But **DO IT AT YOUR OWN RISK** Bro!!

Good luck!!:thumbup::thumbup:

Sent Via XDA™ Premium

o2w5n778 · Feb 16, 2013

Odin3 1.87 is latest for my phone. I try odlest too, but return error.
I flashing gingerbread (in pda) and what to do with dll?

Topics

Topics

Galaxy Mini 2 - Install firmware by odin

o2w5n778

New member

dheeraj (dhlalit11)

Senior Member

Galaxy_Rohit

Senior Member

o2w5n778

New member

Galaxy_Rohit

Senior Member

o2w5n778

New member

Galaxy_Rohit

Senior Member

o2w5n778

New member

Similar threads

New posts