[KERNEL] Siyah - JELLYBEAN - ICS [v4.3.3] "One kernel to rule them all!"
- Thread starter ktoonsez
- Start date
Phatboyj420
Senior Member
You could certainly try it, build.prop is supposed to be the secondary param setting mechanism. Just not sure if build.prop is allowed to set those kind of params. Give it a go and let me know.
Phatboyj420
Senior Member
you get kernel options after flashing siyah. so i'm guessing if you're having problems you'll just have to run kernel cleaner and follow steps again
This has been answered three times for you already??
just saying, i didnt know i had to be on siyah kernel to see the option. The instructions say all the wiping first the do the kernel options wipe, THEN install.
Phatboyj420
Senior Member
For all of you with wifi problems, are you running Task's AOKP?
Once I switched from ShoStockv2 to test AOKP, I also started having this issue. Connects then quickly disconnects.
I found that only some routers have this (specifically dual band routers). The router's did not have trouble connecting to on a different rom.
Just wanted to verify that you guys were on AOKP. I don't think it's the kernel's fault.
I'm running aokp and have an apple airport extreme and had to set it to 2.4ghz only and somehow it worked. I was having the same problem you have.
Sent from my SGH-I777 using Tapatalk 2
Is there any way to disable the prompt to boot the secondary ROM? I flipped through the settings really quickly and searched the thread but didn't see anything mentioned.
Phatboyj420
Senior Member
CWM recovery ?
Does CWM no longer backup Recovery.img or is it just called something different in the backups
ANY Body?
Does CWM no longer backup Recovery.img or is it just called something different in the backups
ANY Body?
Last edited:
Dual boot didn't work here is my process:
I backed up mY current rom and cloned it to secondary then a full data wipe followed.by kernel cleaner then I flashed aokp 4/11 used.kernel cleaner once more and flashed siyah kernel did reboot .let phone boot.up played with some settings. Then put phone into recovery and went to dual boot option>check status it told me shostock v1.3 was my secondary I then rebooted pressed home it didn't work I then kept rebooting and pressed multiple buttons (search,menu,back,volume + -,and power) and none seem to work any ideas?
Sent from my SGH-I777 running shostock2 v1.3 W/ Siyah v3.0.1b1 for the kernel
I backed up mY current rom and cloned it to secondary then a full data wipe followed.by kernel cleaner then I flashed aokp 4/11 used.kernel cleaner once more and flashed siyah kernel did reboot .let phone boot.up played with some settings. Then put phone into recovery and went to dual boot option>check status it told me shostock v1.3 was my secondary I then rebooted pressed home it didn't work I then kept rebooting and pressed multiple buttons (search,menu,back,volume + -,and power) and none seem to work any ideas?
Sent from my SGH-I777 running shostock2 v1.3 W/ Siyah v3.0.1b1 for the kernel
Last edited:
Looks like we may be skipping beta 2 and getting beta 3 since gk had another release to fix other issues. I'd post the link but we don't people flashing it and asking why buttons and calls don't work.
Hopefully gk has updated his source for b3.
Sent from my SGH-I777 using xda premium
Hopefully gk has updated his source for b3.
Sent from my SGH-I777 using xda premium
Yes I wanted to give task650's Rom a shot and yes I have a dual band router but I'm back on CM9 now with no problems.
One question, I remember on the old Siyah (for GB) when you go into a install screen or backup/restore screen, the folowing confirmation screen would only have the actual commmand and not the additional blank lines like it does now (as does the standard CWM Recovery).
For example, right now you have to through these steps to install or backup etc.:
Screen 1: - install zip from sdcard
Screen 2: - choose zip from sdcard
Screen 3: - Siyah -v3.0.1-I777.zip
Screen 4: - No
- No
- No
- No
- No
- No
- No
- Yes - Install Siyah-v3.0.1-I777.zip
- No
- No
- No
- +++++Go Back+++++
and the previous version of Siyah didnt have all the " - NO"'s. Screen 4 would simply have "- Yes - Install Siyah-v3.0.1-I777.zip
". Just something I noticed and was wondering if that would be brought back or not.
Edit:
2nd question, by default, which profile is set with this kernel battery, performance or default?
Last edited:
ktoonsez, just an FYI in case you wanted to put it in the OP ... Ultimatum requires mic swap (i tested both).
Last edited:
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
340The wait is over, Siyah v4 for the I777 is finally here!
Full credit of course goes to Gokhanmoral. Go thank him for creating this great fully customizable kernel RIGHT NOW!!!
This kernel is built from Gokhanmoral's Sources
with some tweeks to make everything run smoothly on our I777's
Click "Thanks" if you like what you see or donate with my link.
Install Instructions
1. Wipe cache
2. Wipe dalvik
3. If you are already on a previous version of Siyah, "Reset ExTweaks profiles" (its under "Kernel specific options")
4. Flash the kernel
5. Reboot and enjoy
It wont hurt your phone at all if you go with the wrong one and only takes a minute to flash the other.
Change Log and Dual-boot ROM instructions in Post #2. READ THE ENTIRE POST #2 BEFORE DOING ANYTHING WITH THE DUAL-BOOT!!!
KEY FEATURES
ROMS VERIFIED WORKING
Here is a link to my sources for those that couldn't find it :good:
https://github.com/ktoonsez/siyahkernel3
DON'T FLASH ANY FILES FROM THE LINK BELOW, JUST FOR CHANGELOG INFO AND CREDIT!!!584.1beta5 Change Log
■Fix permissions issue causing crashing on bott with certain Sammy ROM's
4.1beta4 Change Log
■Linux 3.0.40
■CWM-Based Touch Recovery v6.0.1.1
■fixed led timeout not being saved
■new GPU frequency steps: 54, 108, 133, 160, 266, 330, 400, 440, 520MHz (Removed in beta4)
■added one more GPU step, we now have 4 GPU steps with 108, 160, 266, 330MHz defaults. (Removed in beta4)
■added ntt docomo gps support again (ntt-docomo users can use their previous scripts to get gps working)
■fixed movfilter not being changed with kmemhelper (should fix touch sensitivity problems)
■removed 25MHz and 50MHz CPU steps
■fixed led activity on brightness change
■ExTweaks settings will be reset because of GPU changes. if you revert back to a previous version make sure you reset ExTweaks settings manually.
■update beta1 -> beta4: fixed gamma shift not working in ExTweaks. removed all gpu modifications to make sure we have no problems with other parts. some users (including me) experienced no problems with new gpu steps whereas some users had kernel panics when the screen is off. Consider v4.1beta4 as 4.0.2 with linux 3.0.40 and cwm-based recovery 6.0.1.1.
3.5 Change Log
■bluetooth: support for 4.0.4 stock ROMs
■Whole butt load of merges from Tungstwenty
3.4.4 Change Log
■pegasusq fixes and tweaks
■added cfs tweaks settings to ExTweaks (samsung default, linux kernel default and thunderbolt script defaults)
■added Tungstwenty’s implementation that let’s us see deleted wakelock details (optional in ExTweaks)
■cherry-picked some wifi changes/fixes from cm9 repo
■added mdnie negative effect toggle to ExTweaks (by Tungstwenty)
■and some other tiny changes…
■Linux 3.0.36
■removed some potentially unsafe changes which might be the reason of some users having problems with the latest release.
■added ntt device gps support back. removed exfat related mess. added Entropy512′s patch to prevent multicast packets for added headphone amplification setting to extweaks (named it soundgasm). fixed data statistics and some other changes in config and sources…
3.4.3 Change Log
■Linux 3.0.36
■Several USB fixes
■NFSv4 issues addressed
■Fix overlapping static i/o mappings
3.4.2 Change Log
■Linux 3.0.35
Dual-Boot instructions and Notes
If you want to have another ROM as secondary ROM, follow these steps:
1.Make a nandroid backup of your existing ROM
2.wipe everything and install the other ROM
3.Boot the ROM and make customizations. Don’t forget to reflash SiyahKernel if the ROM flashes another kernel.
4.Use CWM Touch Recovery to clone your rom as secondary rom.
5.Restore nandroid backup
6.To boot from the secondary ROM, either press the HOME key or the VOLUME DOWN key when prompted.
Some notes about dualbooting:
■If you do not make any cloning you won’t be prompted to boot the second ROM.
■you may need to reflash this kernel after a nandroid restore if your nandroid backup is created with another kernel.
■you won’t be able to use mass storage mode for /sdcard in second rom because we have our data and cache partitions on /sdcard. only external sdcard will be mounted if you are using mass_storage mode. mtp should work fine for sdcard.
■once again, you won’t be able to flash any CWM flashable zip to second ROM.
More good information on dual-boot
http://xdaforums.com/showpost.php?p=24724563&postcount=329628OP Updated:
Download v3.2.7.2 - CWM Flashable
IF YOU CAN'T DOWNLOAD THE FILES, USE "REQUEST DESKTOP SITE" OPTION IN YOUR BROWSER!
IF YOU DON'T KNOW HOW TO "REQUEST DESKTOP SITE" GO AWAY, U HAVE NO BUSINESS FLASHING ANYTHING, LET ALONE A KERNEL!
WITH mic swap (use this one if you are using a ROM directly from the I9100 forum, AOKP or CM9)
http://www.mediafire.com/?4ac2u03hg2gg26x
WITHOUT mic swap (use this one if you are using a ROM from OUR I777 forum like UCPLCx or anything based on these)
http://www.mediafire.com/?lx2x9adlgbja7ih25OP Updated
Change Log 4.3.1
1. Status 7 should be gone
2. wakelock: use single threaded workqueueus
3. Lots of "linux/audit" patches
4. Lots of block pathes/updates
5. A butt-load of PM / Sleep mods
6. wireless driver to 1.28.11.9 from Korean S3 BIG TNX to GM (For JB-MALI user)
7. Merged in Linux 3.0.45 and .46 stuff
8. And Im spent
New posts
-
[Firmware] QF001 (ROCO K706) Head Units with UIS 7862a/7862s (not FYT based)
- Latest: gusciorag@gmail.com
-
