[TOOL] MotoTool AIO(GPE,NON-GPE)Root,Recovery,Record,Relock,Backup-Restore Apps[v3.1]

Search This thread

cygnus56

Senior Member
Apr 11, 2010
464
25
Oaxaca
I have a problem, I have done the procedure with two moto g 16gb smoothly, but right now I'm doing a version of 8GB (xt1032), I've done it three times and when it ends the procedure and starts the screen does not respond me.

after I use this method: http://xdaforums.com/moto-g/help/easy-unbrick-moto-g-restore-4-4-4-stock-t2850282

and now everything works normally, but when loading the version of GPE screen stops working.

any ideas?
 

Scottchy014

Senior Member
Sep 25, 2013
136
53
Charlotte
I hang at 'waiting for device' - Connection test is fine. What is the problem?

Make sure you've got "Install from unknown sources" checked in your security settings. Also double check to make sure debugging is checked under developer options. Sometimes I have to turn"debugging" on and off a few times until my phone recognizes that a computer is trying to connect with it. Once it connects properly, pretty much when all the drivers are installed, your phone should prompt you to accept computer access. After that, your device should connect just fine.
 

morepr

Senior Member
Dec 13, 2009
406
83
Cricket Moto G 4 G LTE xt1045

hello does this method will work on Cricket Moto G 4G LTE xt1045 4.4.4 Kitkat ???????? another question what means GPE and NON GPE ???





2nrhjcm.jpg

Code:
#include 
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.Please
* do some research if you have any concerns about features included in this TOOL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/


FEATURES
Code:
*Flash stock recovery (kitkat)
*Flash stock recovery (JellyBean)
*Flash any recovery located at Data\Recovery
*Flash stock recovery (GPE)
*Download the latest version of cwm and twrp from the app(compatible with kitkat an GPE)
*Fix Boot Logo(KitKat)
*Fix Boot Logo(JellyBean)
*Fix Boot Logo(GPE)
*Reboot options(Normal,Fastboot,Recovery)
*CONVERT moto g to moto g GPE
*Root
*Backup your non-system apps
*Restore your non-system apps
*Record screen(change bit-rate, duration, name , etc)
*Install any .apk located at Data\Apk
*Dump info from device


REQUIREMENTS
*Time
*Read all the tutorial
*Moto g
*Usb debugging enabled
*Unlocked Bootloader (intstructions: https://motorola-global-portal.cust.../bootloader/unlock-your-device-a/action/auth )

HOW TO USE IT
You can fin all the information in this PDF:
INSTRUCTIONS
9tectd.png

2j61cu9.png

2rnbu41.png

2uppgg3.png


BUT, HOW ROOT MY DEVICE?
*Put your phone in normal mode(like always)
*Remember have checked usb debugging
*Push supuerSu to sd
*Flash custom recovery
*Boot to recovery from fastboot(down scroll, up select)
*Choose zip from sdcard
*Choose supersu.zip
*Flash it
*Reboot
you are ready....

DOWNLOAD

MotoTool 3.0
Code:
[URL="https://drive.google.com/file/d/0B9MUCjEugQjgazhuMEg5Vmw3bjA/view?usp=sharing"]Direct Download Via GDrive[/URL]

[URL="http://nevermindalonso.wix.com/mototool-aio"]Visit my webpage for mirrors, support and updates! Stay tuned![/URL]



So thanks to:
@Phil3759 for the [CWM Advanced Edition] PhilZ Touch
@a1Pha and @dhacker29 for the recovery == http://xdaforums.com/showthread.php?t=2563599(CWM) , http://xdaforums.com/showthread.php?t=2563599)TWRP
@regaw_leinad for the .dll Android Lib
@ffosilva for GPE CWM CWM for GPE
@denzel09 for the official images for GPE device.
@SystemErrorOne for the new app logo and banner.
@Chainfire for SuperSu
@Boss442 Remove "Padlock" on GPE Model
And maybe...... ME :D

Special Thanks To This People(Friends) For Help Me With Some Bucks(this make me feel like in the beginning of this project,with all the attitude)... :THANKS:
* @Marty
*marwan alani
*Michael Reibert
*Ahmad Alhudban
*Attila Puskas
*FoneWatcher


---------- Post added at 12:35 PM ---------- Previous post was at 11:46 AM ----------

nevermind i see i cant unlock the dam bootloader yet for it grrrrrrr
 

sd_N

Senior Member
Oct 14, 2010
725
112
Hollister
Question

Will this work for the US Cellular version XT1042 to convert to GPE? and will I still get 4gLTE connectivity by flashing my modem if need be? Thanks
 
Last edited:

Goldenmeadow

Senior Member
Oct 13, 2011
362
47
Southwestern Ontario
Looks like great tool!

I need to flash stock recovery.

I installed Moto drivers, tool in C:, enabled Debugging, connected phone in Normal mode.

But when I hit FLASH I'm getting WAITING FOR DEVICE in separate DOS window...

What am I doing wrong?

Thanks!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 300
    2nrhjcm.jpg

    Code:
    #include 
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed.Please
    * do some research if you have any concerns about features included in this TOOL
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */


    FEATURES
    Code:
    *Flash stock recovery (kitkat)
    *Flash stock recovery (JellyBean)
    *Flash any recovery located at Data\Recovery
    *Flash stock recovery (GPE)
    *Download the latest version of cwm and twrp from the app(compatible with kitkat an GPE)
    *Fix Boot Logo(KitKat)
    *Fix Boot Logo(JellyBean)
    *Fix Boot Logo(GPE)
    *Reboot options(Normal,Fastboot,Recovery)
    *CONVERT moto g to moto g GPE
    *Root
    *Backup your non-system apps
    *Restore your non-system apps
    *Record screen(change bit-rate, duration, name , etc)
    *Install any .apk located at Data\Apk
    *Dump info from device


    REQUIREMENTS
    *Time
    *Read all the tutorial
    *Moto g
    *Usb debugging enabled
    *Unlocked Bootloader (intstructions: https://motorola-global-portal.cust.../bootloader/unlock-your-device-a/action/auth )

    HOW TO USE IT
    You can fin all the information in this PDF:
    INSTRUCTIONS
    9tectd.png

    2j61cu9.png

    2rnbu41.png

    2uppgg3.png


    BUT, HOW ROOT MY DEVICE?
    *Put your phone in normal mode(like always)
    *Remember have checked usb debugging
    *Push supuerSu to sd
    *Flash custom recovery
    *Boot to recovery from fastboot(down scroll, up select)
    *Choose zip from sdcard
    *Choose supersu.zip
    *Flash it
    *Reboot
    you are ready....

    DOWNLOAD

    MotoTool 3.0
    Code:
    [URL="https://drive.google.com/file/d/0B9MUCjEugQjgazhuMEg5Vmw3bjA/view?usp=sharing"]Direct Download Via GDrive[/URL]
    
    [URL="http://nevermindalonso.wix.com/mototool-aio"]Visit my webpage for mirrors, support and updates! Stay tuned![/URL]



    So thanks to:
    @Phil3759 for the [CWM Advanced Edition] PhilZ Touch
    @a1Pha and @dhacker29 for the recovery == http://xdaforums.com/showthread.php?t=2563599(CWM) , http://xdaforums.com/showthread.php?t=2563599)TWRP
    @regaw_leinad for the .dll Android Lib
    @ffosilva for GPE CWM CWM for GPE
    @denzel09 for the official images for GPE device.
    @SystemErrorOne for the new app logo and banner.
    @Chainfire for SuperSu
    @Boss442 Remove "Padlock" on GPE Model
    And maybe...... ME :D

    Special Thanks To This People(Friends) For Help Me With Some Bucks(this make me feel like in the beginning of this project,with all the attitude)... :THANKS:
    * @Marty
    *marwan alani
    *Michael Reibert
    *Ahmad Alhudban
    *Attila Puskas
    *FoneWatcher
    129
    ISSUES
    Code:
    *None, waiting for one..

    CHANGELOG
    Code:
    09/03/14
    *Size of the tool now is approx 55 mb
    *GUI updated
    *Added the function for download recovery
    *Added SysTab
    *New Code
    
    23/02/14
    *Added the function to relock the bootloader(status code:2)(only tested on native GPE)
    
    21/02/14
    *Updated TWRP for NON-GPE devices (2.6.3.2, touch is fixed thanks to @dhacker29)
    *Updated  CWM Advanced Edition for NON-GPE devices(6.13.9)
    *Updated  CWM Advanced Edition for GPE devices(6.13.9)
    *Added CWM Swipe(6.0.4.7, thanks to @dhacker29)
    
    16/02/14
    *Updated Ui for the panel drag and drop(install .apk)
    *REMOVED restore function for NON-GPE firmware, sorry for this guys.. :(
    
    15/02/14
    *Backup your non-system apps
    *Restore your non-system apps
    *Record screen(change bit-rate, duration, name , etc)
    *Install any .apk using drag and drop
    
    12/02/14
    *Fixed Restore Function on NON-GPE... all should work perfect..
    
    10/02/14
    *Added [CWM Advanced Edition] PhilZ Touch for KitKat
    *Added [CWM Advanced Edition] PhilZ Touch for GPE
    * Added CWM 6.0.4.6 for KitKat
    *Added TWRP 2.6.3.1
    *Added CWM and TWRP for JellyBean
    *Added CWM  6.0.4.6 for GPE
    *Added SuperSu 1.93

    GPE FIRMWARE
    Code:
    [COLOR="Red"]REMEMBER EXTRACT YOUR FIRMWARE AND COPY ALL THE FILES TO GpeImage/ [/COLOR]
    [URL]https://mega.co.nz/#!3dZB1YAR!Yd6J9Yg_rtSgSpAY8_ZyKJXtweiCzhkevlvKwnEfFN0[/URL]
    Any mirror is welcome :D

    HOW RESTORE MY DEVICE TO NON-GPE FIRMWARE
    Code:
    Well, i have removed this function for my tool because the new  firmwares don't include the .bat file, so if you want restore your device please go to this thread
    [URL="http://xdaforums.com/showthread.php?t=2542219"]Restore NON-GPE firmware[/URL]

    Q&A
    -Why i don't have signal when i convert to GPE?
    Well this is a know issue to fix it flash your stock fsg, don't know how? don't worry.. copy your stock fsg and put it in the tool folder, then press shift+right click and select open window promp here and paste the next code one by one:

    fastboot erase modemst1
    fastboot erase modemst2
    fastboot flash fsg fsg.mbn
    fastboot reboot

    -I have done the previous steep and continue without signal!!
    well, please go to this thread and flash your respective radio via recovery Flash radio using recovery

    -Why i can't boot to recovery?
    Remember in fastboot mode VolUp SELECT and VolDown SCROLL

    -Why i can't install an apk using your tool?
    Well, be sure that the apk name don't have spaces, and check if the path of your apk have spaces too... i suggest that: rename your apk (simpler name) EX. xxxxxx.apk (where xxxxx are the name) and move your apk to the desktop, then try again..

    -How can i say thank you?
    Just press the THANKS BUTTON :D
    14
    Hi to all!! :D

    i'm uploading a new version, i just add the function to flash the new boot logo "powered by android" so, stay tuned if this is important for you :D

    **edited**
    tomorrow i will update the op, but for now this is the link
    HIT ME!
    9
    SOME INFO

    Hi
    I will update the tool for suppot lollipop :D if some one have the factory images(official or unofficial please pm me)
    And btw i want show you my first themes for cm11

    BlueMerry
    GreenRadioactive
    Free version soon :D
    8
    Hi... I have bad news...
    Today I will sell my moto g and I will start to save money and buy a nexus 5 or something like that... Was great help to others,I really enjoy help with the Tool...
    So bye bye buddy's, I can't continue the developing for the moto g maybe if someone be my tester we can continue (maybe)... Thanks for all the feedback... See you soon.. And I hope you understand...

    And remember "working harder, make it better,do it faster" this is the key for everything...

    Enviado desde mi XT1032 mediante Tapatalk