HI there.I am having a problem after unlocking the bootloader and flashing nAa kernel.It freezes on the nAa kernel boot screen and nothing happens for 10-15 mins.Any ideas ?
[KERNEL] 2.6.29.6-nAa-14 [23/8/12] Custom Gingerbread kernel + CWM Recovery
- Thread starter nobodyAtall
- Start date
Have you already factory reset and clean dalvik-cache ? Try it and install the MiniCM7-2.2.0 after that..
Hopefully it helped..
Question
Am i using the latest version for the nAa kernel-its 2.6.29.6 nAa11@hydra#1
or has a new one been made since the adreno drivers were released?
and is there 1 titled u20i not just u20..thnx in advance
Am i using the latest version for the nAa kernel-its 2.6.29.6 nAa11@hydra#1
or has a new one been made since the adreno drivers were released?
and is there 1 titled u20i not just u20..thnx in advance
Last edited:
Am i using the latest version for the nAa kernel-its 2.6.29.6 nAa11@hydra#1
or has a new one been made since the adreno drivers were released?
and is there 1 titled u20i not just u20..thnx in advance
Seems like its the latest one.. nAa seemed to focus on developing ICS, and suspect its arrival in not-so-far future
Hm tried that and it still was freezing on kernel boot screen.So i decided i will try Sonystyle with original kernel.And maybe in near future i will change to CM
Hm tried that and it still was freezing on kernel boot screen.So i decided i will try Sonystyle with original kernel.And maybe in near future i will change to CM
It is a bit of a long shot but did you remove your sd card? The kernel will not start without an sd card.
Got a little issue here:
Have x10 mini pro, rooted and unlocked bootloaded, and everytime I try to flash the U20_nAa-11_2.6.29.6-nAa-11.ftf I get this error: ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
Any ideas?
Thanks!
Have x10 mini pro, rooted and unlocked bootloaded, and everytime I try to flash the U20_nAa-11_2.6.29.6-nAa-11.ftf I get this error: ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
Any ideas?
Thanks!
not so sure. did you follow the instruction?
by the way, make sure to use the x10 mini pro flasher.
Sorry if this is too obvious:
Make sure you really unlocked the bootloader (this thing about "R" and "r" ...).
Redownload the ftf file one more time and try to flash.
If you have some other ftf files in your firmwares folder, remove them.
Last edited:
Is this still in development? Can the new adreno drivers be included in just a common update or they have to be added to a totally new Kernel? Or maybe they must be applied on each ROM..? I don't know much about this
Oh, and by the way:
Where did you get that information? That would be great, though it would be even better if paul-xxx decided to share the work with his current CM9 and fix that one up instead of having more than one ROM for choosing!
Oh, and by the way:
Seems like its the latest one.. nAa seemed to focus on developing ICS, and suspect its arrival in not-so-far future
Where did you get that information? That would be great, though it would be even better if paul-xxx decided to share the work with his current CM9 and fix that one up instead of having more than one ROM for choosing!
rskyline
Senior Member
21/007/2012 17:07:43 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
What does that mean??
What does that mean??
Maybe wrong kernel file, or you didn't unlock your bootloader. Give us all txt from flashtool.
Sent from my U20i using XDA
Bootloader not rooted correctly:
http://xdaforums.com/showthread.php?t=1254225
http://xdaforums.com/showthread.php?t=1462278
follow these moves, you'll do fine
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
171Search no more. This is THE kernel for your gingerbread x10mini pro.
Before unlocking your bootloader, read this thread
If you brick your device, you are the sole responsible.
Features:
- Based on stock 2.6.29 SE sources
- Upgraded to Linux kernel version: 2.6.29.6
- Ported various components from 2.6.35 / 38
- Significantly fast booting time (~25 secs from power button to lockscreen)
- CWM recovery 5.0.2.7 in kernel
- Netfilter support / AP support / Usb tethering
- Swap support
- Tun/Tap
- Mddi fix
- Ext3/4 support
- Modules auto-copying at boot
- Dual touch options:
- Fake dual touch in kernel (thanks to andrej456) (default)
- Modular fake dual touch in kernel (thanks to doixanh)
- Modular no dual touch - Many CPU freq governors to chooce from: interactive, interactivex, minmax, smartass, smartass2, scary and savagedzen
- Modular Undervolt
- NOOP ioscheduler
- TINY RCU
- DM_CRYPT_GLOBAL_WORKQUEUES
- Ramzswap for compcache
- Offline charging embedded in the kernel
- Stable and fast oveclocked frequencies (not enabled by default)
- Frequency table: 19MHz - 864MHz
- Default CPU governor: interactive
- Two way call recording (might be against the law for some countries, you are responsible for using this feature)
- Interface Stat support for ICS
- Memory management and binder improvements from gb kernel
- Many, many feature and stability patches from various kernel sources
- ICS DRM support
IMPORTANT:
- For wifi to work, the ROM MUST have Wifi built from sources as in CM. If this is not the case, the Wifi WONT work, DON'T compain here about that.
- For vibration, the ROMs need to use the gb implementation.
FAQ:
If you have any issues, please read the FAQ thread first: http://xdaforums.com/showthread.php?t=1266911
Requirements:
- Unlocked bootloader --> http://xdaforums.com/showthread.php?t=1254225
- MiniCM7 or any recent gingerbread-based ROM
- Flashtool tested to be working with your phone, e.g. from here: http://www.multiupload.com/GYL7A7XQBT Original flashtool thread: http://xdaforums.com/showthread.php?t=920746
Install:
- Backup
- Unlock your bootloader as described here: http://xdaforums.com/showpost.php?p=17384177&postcount=3 or here: http://xdaforums.com/showthread.php?t=1254225
- Download the kernel ftf file from here and move it to Flashtool\firmwares so that Flashtool can pick it up
- Flash the kernel via Flashtool
- Reboot and check Settings -> About Phone:
Uninstall:
- Flash back to stock using Flashtool or SEUS.
Performance:
Sources:
The linux kernel is GPL'ed, everyone who does modifications should make them publicly available.
https://github.com/nobodyAtall/nAa-kernel
Credits: the_laser, FreeXperia and the rest of XDA devs who helped bypassing the bootloader!
DaRk_dOg for his awsome boot logo
Donate:
If you are enjoying my work please consider donating:
.
Donations are voluntary but allow me to spend more time on this project.
Disclaimer:
I can't be held responsible if this Kernel bricks your device or makes it explode in your hands! Use it at your own risk!
49nAa-14
- ICS DRM support
- CWM Recovery 5.0.2.8
- Fixed boot into recovery issues
- Latest gingerbread busybox and init
- Panic timeout set to 1sec for shakira
- Fixed touchscreen multitouch modules to load
- Kernel boot animation
- Memory improvements from ICS
- Proximity and Lightsensors report events as they should now
- Fix for robyn keypad
- CWM support for formatting sd-ext
- CWM for shakira is no longer ldpi
- msm/kgsl: Porting kgsl 1.1 from 2.6.35 gives a good performance boost for 2d/3d operations
- acpuclock: Improved overclocking from 2.6.35
- shakira: keyboard reset with HOME + POWER
- pmem: Porting pmem from 2.6.35
- Bugfixes and improvements: sha1, vfs_cache_pressure, net/ipv4, net sched, pid, mm/vmscan.c
- Module for disabling dual touch altogether
- Performance governor selected in recovery
- NOOP ioscheduler (faster for android)
- + 2MB More RAM (184MB in total)
- Cypress touchscreen fixes for notification bar pull up
- Updated CWM recovey to the latest version (5.0.2.7)
- Interactive governor selected in recovery
- Minor smartassv2 fixes
- Significantly faster booting time (~25 secs from power button to lockscreen)
- Less crasses regarding reboot
- Jhash improvements
- Two way call recording
- Modular dual touch based on dx's DT (replaces existing DT if insmoded)
- Offline charging
- Improved overclocking frequencies in kernel (no overclocking module needed for over 600MHz)
- Interface Stat support for ICS
- Sleep improvements for armv6
- Implemented WLOD on kernel panic
- Ported latest akm8973 sources to work for the mini
- Usb mounting via CWM
- DDMS screen capture
- Updated USB drivers to semc GB sources
- New gb vibrator implementation
- Cpu frequency fixes
- Switched to fake dual touch from andrej456 (seems to be the best choice for the mini)
- CIFS and utf8 support
- CWM 5.0.2.3
- Update to Linux kernel 2.6.29.6
- NPARTS event support for disk devices
- All around Improvements and bug fixes in:
BFQ, mutex adaptive spins, mm, irq, mmc, cpufreq, hrtimer, mtd, memcpy/memmove, yaffs - Removed FPS uncap since it caused issues with scrolling and with some apps
- Gingerbread init/init.rc
- Boot logo
- Fixed ddms screen capture
- BFQ ioscheduler
- TINY RCU
- DM_CRYPT_GLOBAL_WORKQUEUES
- Removed FPS Cap
- Display power-off optimizations
- Droidwall support
- Memory management and binder improvements from gb kernel
- scary and savagedzen CPU governors
- Export scaling_available_frequencies attr in /sys
- Ramzswap support for compcache
- Many bug fixes and optimizations from upstream regarding:
- mm, cifs, sctp, timed_gpio, net sockets, tcp, fs: pipe.c, yaffs, ext4, dm-crypt, arm, sctp
nAa-02
- Ext3/4 support
- Modules auto-copying at boot
- Fake dual touch in kernel (doixahn's 007)
- CPU freq governors: interactive, interactivex, minmax, smartass, smartass2
nAa-01
- Netfilter / AP support (WiFi tethering)
- Swap support
- Tun/Tap in kernel
- Mddi fix in kernel
- Modular Overclock / Undervolt
- CWM recovery v4.0.1.5 in kernel
34Hi folks!
nAa-10 is ready for use. Changelog for this build:
### nAa-10:
* msm/kgsl: Porting kgsl 1.1 from 2.6.35 gives a good performance boost for 2d/3d operations
* acpuclock: Improved overclocking from 2.6.35
* shakira: keyboard reset with HOME + POWER
* pmem: Porting pmem from 2.6.35
* Bugfixes and improvements: sha1, vfs_cache_pressure, net/ipv4, net sched, pid, mm/vmscan.c
* Module for disabling dual touch altogether
* Performance governor selected in recovery
* NOOP ioscheduler (faster for android)
* + 2MB More RAM (184MB in total)
* Fixed touchscreen pull up notification bar (vertical and horizontal)
NOTE: Kgsl 1.1 is compatible only with MiniCM7-2.1.8 for the time being.
Enjoy!23Hi all,
nAa-09 released!
Changelog for this kernel:
### nAa-09:
* Updated CWM recovey to the latest version (5.0.2.7)
* Interactive governor selected in recovery
* Minor smartassv2 fixes
Have fun22Hi folks!
nAa-12 is released with small performance and awesomeness based tweaks:
* Fixed touchscreen multitouch modules to load
* Kernel boot animation
* Memory improvements from ICS
Enjoy!
