[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages

Status
Not open for further replies.
Search This thread

mai77

Senior Member
Nov 16, 2011
1,429
580
latest european ROM of Jan. 2013

GT-S5360 Germany 2013 January Android 2.3.6 S5360XXLK3 S5360DBTLL1

http://www.sammobile.com/firmware/?page=8&view=10152


PDA: S5360XXLK3
CSC: S5360DBTLL1
MODEM_S5360_XXLK3

Version: 2.3.6
Date: 2013-01-02
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom


I hope this is not a rip-off : Kernel version is of Nov 28th , 2012 -- contradicting january build date as claimed by SAMMOBILE anyone in the know ?

ver. 2.6.35.7 kernel XXLK3


advantages: fewer bookmark bloatware (only 2 bookmarks)
starts in German language
 
Last edited:

MobiManiacs

Member
Sep 4, 2009
27
2
Need Stock ROM For Venezuela

Hello Doky. Thanks so much for you work and dedication to Galaxy Y development. I am looking for stock ROM for Venezuela Galaxy Y S5360L to flash with Odin. Detail are below. Would you please post this ROM for me? Thank you! :good: - MobiManiacs

HIDSWVER is: S5360LUKJ2/S5360LUUBKJ1/S5360LUHKJ2/S5360LUHKJ2

PDA: S5360LUHKJ2

Phone: S5360LUHKJ2

CSC: S5360LUUBKJ1

PCODE: GT5360MALVNO

Model: GT5360L

Build: Gingerbread.UHKJ2

Baseband Version: S5360LUHKJ2

Kernel: 2.6.35.7
seinfra@SEPT-77#1
 

Doky73

Senior Member
Apr 22, 2011
848
2,950
near to Budapest
sgy.noinfo.hu
GT-S5360 Germany 2013 January Android 2.3.6 S5360XXLK3 S5360DBTLL1

http://www.sammobile.com/firmware/?page=8&view=10152
Already posted on 10th january by me :)
Two new packages:
- for Germany:
S5360_XXLK3_DBTLL1_XXLK3
-for France (I think)
S5360_XXLK3_XEFLL1_XXLK3

Sorry for not maintaining the firs post up-to-date, because lack of free time...
Therefore I post the full S5360 download folder:
If anyone looking for a specific pack, please check it HERE
 

hammadjavaid

Senior Member
Nov 23, 2012
112
3
Please read the first post
And the second and third too!

Sent from my SGSII using Tapatalk 2 & Swype


This is my previous stock rom

PDA: JPLE1
PHONE: XXLE1
CSC: JPLD1

---------- Post added at 11:56 PM ---------- Previous post was at 11:53 PM ----------

Docky i have found Samsung orignal firmware but there is only 2 files "Md5" and the second one is "dll". How can i flash this ??
 
see SplitFUS thread and 1st post ot this thread

This is my previous stock rom

PDA: JPLE1
PHONE: XXLE1
CSC: JPLD1

---------- Post added at 11:56 PM ---------- Previous post was at 11:53 PM ----------

Docky i have found Samsung orignal firmware but there is only 2 files "Md5" and the second one is "dll". How can i flash this ??
u can split this file using SplitFus by sir doky (see at ather thread in development section) >>> and then u can flash the files result using odin

but if u want to get ur stockrom again with simple step...perhaps u can search, read and download a stockrom flashable odin files that suitable with ur region @ 1st post of this thread...

:highfive::highfive::highfive:
 

Doky73

Senior Member
Apr 22, 2011
848
2,950
near to Budapest
sgy.noinfo.hu
This is my previous stock rom

PDA: JPLE1
PHONE: XXLE1
CSC: JPLD1

---------- Post added at 11:56 PM ---------- Previous post was at 11:53 PM ----------

Docky i have found Samsung orignal firmware but there is only 2 files "Md5" and the second one is "dll". How can i flash this ??

Just recently posted the whole repository link when you take a look into it, you'll find your JPLE1 file
 

hammadjavaid

Senior Member
Nov 23, 2012
112
3
Thanx Sir u helped me a lot. Now Kies show this is the latest firmware :victory: yuppyy. Again thnx sir :)

---------- Post added at 04:02 PM ---------- Previous post was at 03:59 PM ----------

Docky Sir! Is this possible to reflash the Firmware using Kies ?
 
Last edited:

stokeyblokey

Member
Jan 6, 2013
35
11
Stoke
what is the latest Firmware in Philippines sir?:good::eek:

From his original post, I would say it is:
Indonesia, Malaysia, Philippines, Singapore, Vietnam
Wipe package
Based on: S5360DXLJ1_S5360OLBLG1_S5360DXLI1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Mon Oct 8 09:58:56 KST 2012
Included CSCs:
GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC, XTE
Included languages:
DX = en,id,ms,th,vi,zh(ta)
This build contains some provider specific bloatware, depending on your CSC selection.


---------- Post added at 04:46 PM ---------- Previous post was at 04:25 PM ----------

Just wanted to say a HUGE thank you to Doky73 for all his efforts in converting these firmware files to Odin-able packages, it has saved my ass and many more I am certain!

Long story short, I broke my Y with Link2SD and more enthusiasm than sense, and now am back on stock XXLA2 using the files and instructions posted here - all works as it should again :D

(For anyone who cannot get Odin to flash, perhaps you have messed up your kernel - try flashing Hyperion 7 through stock recovery first and then try flashing Odin again - worked for me!)

Cheers

Stokey
 
Last edited:

Doky73

Senior Member
Apr 22, 2011
848
2,950
near to Budapest
sgy.noinfo.hu

Doky73

Senior Member
Apr 22, 2011
848
2,950
near to Budapest
sgy.noinfo.hu
Thanx Sir u helped me a lot. Now Kies show this is the latest firmware :victory: yuppyy. Again thnx sir :)

---------- Post added at 04:02 PM ---------- Previous post was at 03:59 PM ----------

Docky Sir! Is this possible to reflash the Firmware using Kies ?

See my preceding post! DXLL1 for generic or DXMA1 for La Fleur models

AFAIK, KIES can't re-flash the same ROM. Use ODIN!
 

hammadjavaid

Senior Member
Nov 23, 2012
112
3
Docky Sir! Is this the latest firmware in Pakistan? S5360_JPMA1_OJPMA1_XXLL
& which is the best Stock Rom for gaming ??
 
Last edited:
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 649
    READ FAQ, Q&A and Know Issues before downloading and using this packs

    TESTED and WORKING ODIN FLASHABLE BUNDLES for Samsung Galaxy Y


    Preface:
    Since Galaxy Y has been released, there are several firmware files available from different sources, eg. sammobile and etc... But most of these firmware packages (which are original unmodified Kies files) are useless for us, because Odin is not able to flash these files.
    Therefore I started to analyze the Kies pack, and finally developed a method to convert the Kies files to Odin-able package.

    The full conversion process of one pack took me about 2-3 hours including download, analyze, rebuild, test, upload, and finally post. So please keep in mind, I'm not just a redistributor of the firmware files, I've real work in it. Your thanks (button) and donations are very welcome, if my work helps you anyway.
    In case Your work based in my rebuilt bundles, crediting me is expected. Stealing my work is unforgivable.



    Disclaimer: I'm not responsible for any damage done to your phone.
    Use the following materials at your own risk only!
    Read post #2 and #3 for more info!

    Not all packs are listed here, If you're looking for a specific pack, please check it HERE

    So here are the bundles:

    (format: PHONE / CSC / MODEM versions)

    EUROPE

    European multilanguage build.
    based on: S5360XXKK6_S5360OXXKK2_RST_S5360XXKK5_HOME.tar.md5
    ro.build.date=Wed Nov 23 21:52:07 KST 2011
    ro.build.version.release=2.3.6
    Supported languages:
    XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
    Included CSCs: (Default is XEU)
    ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
    This build does not contains any provider specific bloatware.



    Vodafone Hungary branded
    based on: S5360XXKK6_S5360VDHKK1_S5360XXKK5_HOME.tar.md5
    ro.build.date=Wed Nov 23 21:52:07 KST 2011
    Supported region: VDH only



    European multilanguage build.
    based on: S5360XXKL3_S5360OXXKL1_RST_S5360XXKL3_HOME.tar.md5
    ro.build.date=Wed Dec 14 17:16:14 KST 2011
    Supported languages:
    XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
    Included CSCs: (Default is XEU)
    ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
    After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
    This build does not contais any provider specific bloatware.



    This is an OXF CSC file only!!!
    included regions:
    CNX COA ERO GBL MOT MSR MTL PMN SIM TMT TOP TRA
    The pack includes region specific settings, and Swype keyboard for the following languages:
    EnglishUK, EnglishUS, Bulgarian, Croatian, Danish, Dutch, Finnish, French, German, Korean, Norwegian, Romanian, SerbianLA, Slovenian, Swedish
    You may use other parts of S5360_XXKL3_OXXKL1_XXKL3 from above!



    European multilanguage build.
    based on: S5360XXLA2_S5360OXXLA2_RST_S5360XXLA2_HOME.tar.md5
    ro.build.date=Wed Jan 11 13:58:09 KST 2012
    Supported languages:
    XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
    Included CSCs: (Default is XEU)
    ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
    After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
    This build does not contains any provider specific bloatware.



    European multilanguage build.
    based on: S5360XXLA4_S5360DBTKK1_S5360XXLA4_HOME.tar.md5
    ro.build.date=Wed Jan 25 14:24:48 CET 2012
    ro.build.version.release=2.3.6
    Supported languages:
    XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
    Included CSCs: DBT only (Supported networks: T-Mobile D, Vodafone.de, E-Plus, o2 - de)

    This build does not contains any provider specific bloatware.


    European multilanguage build.
    based on: S5360XXLC1_S5360ATOLB1_S5360XXLC1_HOME.tar.md5
    ro.build.date=Tue Mar 6 17:24:32 KST 2012
    ro.build.version.release=2.3.6
    ro.build.changelist=1012072
    Supported languages:
    XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
    Included CSCs: ATO only
    Supportd network setups:
    Austria: A1, bob, T-Mobile A, Orange AT, tele.ring, 3, yesss!, aon

    This build contains some provider specific bloatware.


    European multilanguage build.
    Wipe package
    based on: S5360XXLD5_S5360OXXLD5_RST_S5360XXLD5_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Wed Apr 25 16:30:22 KST 2012
    ro.build.changelist=1103396
    Supported languages:
    XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
    Included CSCs: (Default is AUT, XEU missing!)
    AUT CMF COS CYO CYV EUR FOP ITV PAN PHE SMO SUW TPH XEF XEH XEO XEZ XSK
    After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
    This build does not contains any provider specific bloatware.


    European multilanguage build.
    Wipe package
    Based on: S5360XXLE1_S5360OXXLE1_RST_S5360XXLE1_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Thu May 3 14:19:52 KST 2012
    ro.build.changelist=1111664

    Supported languages:
    XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
    Included CSCs: (Default is AUT, XEU missing!)
    AUT CMF COS CYO CYV EUR FOP ITV PAN PHE SMO SUW TPH XEF XEH XEO XEZ XSK
    After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
    This build does not contains any provider specific bloatware.



    Included carrier setup for countries: Bosnia, Bulgaria, Croatia, Montenegro, Romania, Serbia, Slovenia
    And Swype keyboard for : EnglishUK, EnglishUS, Bulgarian, Croatian, Danish, Dutch, Finnish, French, German, Korean, Norwegian, Romanian, SerbianLA, Slovenian, Swedish

    Use conjunction with XXLE1_OXX, but replace the CSC file!



    European multilanguage build.
    Wipe package

    Based on: S5360XXLF1_S5360OXXLF1_RST_S5360XXLF1_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Thu Jun 7 18:04:19 KST 2012
    ro.build.changelist=1142401

    Supported languages:
    XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
    Included CSCs: (Default is AUT, XEU missing!)
    AUT CMF COS CYO CYV EUR FOP ITV PAN PHE SMO SUW TPH XEF XEH XEO XEZ XSK
    After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
    This build does not contains any provider specific bloatware.


    European multilanguage build.
    Wipe package

    Based on: S5360XXLF3_S5360OXXLF3_RST_S5360XXLF3_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Wed Jun 27 10:45:25 KST 2012
    ro.build.changelist=1157453

    Supported languages:
    XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
    Included CSCs: (Default is AUT. XEU missing!)
    AUT CMF COS CYO CYV EUR FOP ITV PAN PHE SMO SUW TPH XEF XEH XEO XEZ XSK
    After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
    This build does not contains any provider specific bloatware.


    European multilanguage build.
    Wipe package

    Based on: S5360XXLH2_S5360OXXLH2_RST_S5360XXLH2_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Thu Aug 30 15:16:00 KST 2012
    ro.build.changelist=1190009

    Supported languages:
    XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)*
    Included CSCs: (Default is AUT)
    AUT CMF COS CYO CYV EUR ORS PAN SMO SUW TPH TSH XEH XEO XEZ XSK
    After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
    This build does not contains any provider specific bloatware.


    European multilanguage build.
    Wipe package

    Based on: S5360XXLK1_S5360OXFLK1_S5360XXLH2_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Wed Nov 14 20:05:50 KST 2012

    Supported languages:
    XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)*
    Included CSCs:
    ALB CNX COA ERO GBL MOT MSR PMN SIM TMT TOP TRA TWO
    After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
    This build does not contains any provider specific bloatware, but contains localized Swype keyboard



    ASIA / PACIFIC


    • corrected CSC if you have the zero release, download this one only
    Bangladesh, India, Nepal, Sri Lanka
    based on: S5360DDLA3_S5360ODDLA2_S5360DDLA2_HOME.tar.md5
    ro.build.date=Wed Jan 18 17:46:48 KST 2012

    Included CSCs:
    ETR INS INU NPL SLK TML
    Included languages:
    DD = en(hi)
    This build does not contain provider specific bloatware.
    (some SD card issues reported with this build -> I suggest to format your SD to FAT32)


    Bangladesh, India, Nepal, Sri Lanka
    based on: S5360DDLC2_S5360ODDLA2_S5360DDLC2_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Tue Mar 20 12:52:45 KST 2012

    Included CSCs:
    ETR INS INU NPL SLK TML
    Included languages:
    DD = en(hi)
    This build does not contain provider specific bloatware.


    Bangladesh, India, Nepal, Sri Lanka
    WIPE package
    Based on: S5360DDLE1_S5360ODDLD1_S5360DDLE1_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Fri May 4 19:14:23 KST 2012

    Included CSCs:
    ETR INS INU NPL SLK TML
    Included languages:
    DD = en(hi)
    This build does not contain provider specific bloatware.


    Bangladesh, India, Nepal, Sri Lanka
    WIPE package
    Based on: S5360DDLF2_S5360ODDLF1_S5360DDLF1_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Fri Jun 22 21:18:27 KST 2012

    Included CSCs:
    ETR INS INU NPL SLK TML
    Included languages:
    DD = en(hi)
    This build does not contain provider specific bloatware.


    Bangladesh, India, Nepal, Sri Lanka
    WIPE package
    Based on: S5360DDLK2_S5360ODDLK1_S5360DDLK1_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Fri Nov 9 13:26:36 KST 2012

    Included CSCs:
    ETR INS INU NPL SLK TML
    Included languages:
    DD = en(hi)
    This build does not contain provider specific bloatware.

    Indonesia, Malaysia, Philippines, Singapore, Vietnam
    based on: S5360DXKL2_S5360OLBKL2_S5360DXKL2_HOME.tar.md5
    ro.build.date=Thu Dec 15 19:22:01 KST 2011
    Included CSCs:
    GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC XTE
    Included languages:
    DX = en,id,ms,th,vi,zh(ta)
    This build contains some provider specific bloatware, depending on your CSC selection.


    Indonesia, Malaysia, Philippines, Singapore, Vietnam
    based on: S5360DXLA1_S5360OLBLA1_S5360DXLA1_HOME.tar.md5
    ro.build.date=Thu Jan 12 20:25:01 KST 2012
    Included CSCs:
    GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC XTE
    Included languages:
    DX = en,id,ms,th,vi,zh(ta)
    This build contains some provider specific bloatware, depending on your CSC selection.


    Indonesia, Malaysia, Philippines, Singapore, Vietnam
    based on: S5360DXLB1_S5360XSELB1_S5360DXLB1_HOME.tar.md5
    ro.build.date=Fri Feb 3 13:52:03 KST 2012
    ro.build.version.release=2.3.6
    Included CSCs:
    XSE only (Use DXLA1's CSC for rebranding)
    Included languages:
    DX = en,id,ms,th,vi,zh(ta)
    This build contains some provider specific bloatware, depending on your CSC selection.


    Indonesia, Malaysia, Philippines, Singapore, Vietnam
    based on: S5360DXLC1_S5360OLBLA1_S5360DXLC1_HOME.tar.md5
    ro.build.date=Wed Mar 7 09:53:45 KST 2012
    ro.build.version.release=2.3.6
    Included CSCs:
    GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC
    Included languages:
    DX = en,id,ms,th,vi,zh(ta)
    This build contains some provider specific bloatware, depending on your CSC selection.


    Indonesia, Malaysia, Philippines, Singapore, Vietnam
    Wipe package
    Based on: S5360DXLE1_S5360XSELB1_S5360DXLE1_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Fri May 4 19:35:02 KST 2012
    Included CSCs:
    GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC
    Included languages:
    DX = en,id,ms,th,vi,zh(ta)
    This build contains some provider specific bloatware, depending on your CSC selection.



    Indonesia, Malaysia, Philippines, Singapore, Vietnam
    Wipe package
    Based on: S5360DXLF2_S5360OLBLG1_S5360DXLF1_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Fri Jun 22 21:05:16 KST 2012
    Included CSCs:
    GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC, XTE
    Included languages:
    DX = en,id,ms,th,vi,zh(ta)
    This build contains some provider specific bloatware, depending on your CSC selection.



    Indonesia, Malaysia, Philippines, Singapore, Vietnam
    Wipe package
    Based on: S5360DXLJ1_S5360OLBLG1_S5360DXLI1_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Mon Oct 8 09:58:56 KST 2012
    Included CSCs:
    GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC, XTE
    Included languages:
    DX = en,id,ms,th,vi,zh(ta)
    This build contains some provider specific bloatware, depending on your CSC selection.

    (SOUTH) AMERICA

    Brazil
    based on: S5360BUTKI3_S5360ZTAKI3_S5360BUTKI3_HOME.tar.md5
    ro.build.date=Thu Sep 22 13:27:09 KST 2011
    ro.build.version.release=2.3.5

    Included CSCs:
    ZTA only (Claro)
    Included languages:
    UT = en,es,pt
    This build contains some provider specific bloatware.


    Brazil
    based on: S5360BUTKJ2_S5360ZTOKJ1_S5360BUTKJ1_HOME.tar.md5
    ro.build.date=Fri Oct 7 23:45:59 KST 2011
    ro.build.version.release=2.3.5

    Included CSCs:
    ZTO (Open Brasil)
    supported carriers: Oi, TIM, Claro, VIVO, Brasil Telecom, Amazônia Celular, Sercomtel, CTBC, AEIOU
    Included languages:
    UT = en,es,pt
    This build contains some provider specific bloatware.


    Brazil
    based on: S5360BUTKL2_S5360BZTOKL2_S5360BUTKL2_HOME.tar.md5
    ro.build.date=Wed Dec 21 20:13:51 KST 2011
    ro.build.version.release=2.3.6

    Included CSCs:
    ZTO (Open Brasil)
    supported carriers: Oi, TIM, Claro, VIVO, Brasil Telecom, Amazônia Celular, Sercomtel, CTBC, AEIOU
    Included languages:
    UT = en,es,pt
    This build contains some provider specific bloatware.


    Brazil
    based on:
    ro.build.version.release=2.3.6
    ro.build.date=Fri Mar 16 01:26:41 KST 2012

    Included CSCs:
    ZTO (Open Brasil)
    supported carriers: Oi, TIM, Claro, VIVO, Brasil Telecom, Amazônia Celular, Sercomtel, CTBC, AEIOU
    Included languages:
    UT = en,es,pt
    This build contains some provider specific bloatware.


    Brazil
    Based on: S5360BUTLI1_S5360BZTMLC1_S5360BUTLI1_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=2012. 09. 04. 20:26:11 KST
    ro.build.changelist=1191088
    WIPE package - will erase your user data!!!

    CSC: ZTM Only (TIM)
    Included languages:
    UT = en,es,pt
    This build contains some provider specific bloatware.


    Chile
    based on: S5360LUHKL1_S5360CHLKL1_S5360LUHKL1_HOME.tar.md5
    ro.build.date=Thu Dec 1 15:02:14 KST 2011
    ro.build.version.release=2.3.6

    Included CSCs:
    CLH
    Included languages:
    UH = en,es
    This build contains some provider specific bloatware.
    (please note, not tested yet. Pls report if it's OK or not!)



    Trinidad and Tobago
    based on: S5360LUHKI6_S5360UUBKI4_S5360LUHKI6_HOME.tar.md5
    ro.build.date=Wed Sep 21 18:13:38 KST 2011
    ro.build.version.release=2.3.5


    Included CSCs:
    TDR TTT VNO
    Included languages:
    UH = en,es
    This build contains some provider specific bloatware.
    (please note, not tested yet. Pls report if it's OK or not!)


    MIDDLE EAST and AFRICA

    Arabic release
    based on: S5360JPLA1_S5360OJPLA1_S5360XXLA2_HOME.tar.md5
    ro.build.date=Sat Jan 14 06:54:01 KST 2012
    ro.build.version.release=2.3.6

    Included CSCs:
    ABS AFG BTC EGY JED KSA MAT MED MID MMC MRT MWD OTU PAK THR TMC TUN WAN XSG XSS

    Included languages:
    JP = ar,en,fr(fa,ur)
    This build contains some provider specific bloatware.


    Arabic release
    based on: S5360JPLC1_S5360OJPLC1_S5360XXLC1_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Fri Mar 16 15:45:06 KST 2012

    Included CSCs:
    ABS AFG BTC EGY JED KSA MAT MED MID MMC MRT MWD OTU PAK THR TMC TUN WAN XSG XSS

    Included languages:
    JP = ar,en,fr(fa,ur)
    This build contains some provider specific bloatware.


    Arabic release
    based on: S5360JPLG1_S5360OJPLG1_S5360XXLF3_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Tue Jul 10 11:45:03 KST 2012

    Included CSCs:
    ABS AFG BTC EGY JED KSA MAT MED MID MMC MRT MWD OTU PAK THR TMC TUN WAN XSG XSS

    Included languages:
    JP = ar,en,fr(fa,ur)
    This build contains some provider specific bloatware.



    South Africa
    based on: S5360XXLC1_S5360ATOLB1_S5360XXLC1_HOME.tar.md5
    ro.build.version.release=2.3.6
    ro.build.date=Thu Dec 8 15:06:21 KST 2011

    Included CSCs:
    XFA XFC XFE XFM XFV

    Included languages:
    XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
    This build contains some provider specific bloatware.




    Depending on your interest (and my spare time), I'll build additional versions...

    In case You have a specific request, please post your full version info from dialer *#1234# (if you're on your original ROM) and PCODE from *2767*4387264636# !
    My recommendation to record above info when you're on your original ROM, before experimenting any other versions!

    Please read post #2 and #3 for flashing guide and FAQ!

    <<< Please use the thanks button if you find it useful! >>>
    265
    Odin flash guide...

    Before You proceed: take a notice, and record your original (in case you are on original stock fw) firmware levels by typing *#1234# and PCODE by *2767*4387264636#. This might be helpful if you want to go back to your original in-box firmware.

    Check WHITE-CZ's video tutorial on the boot mode selection, and Odin flash!

    - download the required firmware bundle (one of the repacked from the #1 post above)
    - install Kies, or Samsung driver pack
    - unzip the package, You'll get 3 *.tar (or tar.md5) files
    - download Odin3 1.84 or 1.85 (click here)
    - stop Kies
    - stop all active ADB sessions
    - start odin
    - do backup of your data and apps
    - charge your SGY at least 75%
    - remove SGY from USB or charger
    - start the device in Download mode
    - power off Your SGY
    - wait 30 sec
    - Press Vol Down, Home, and Power at the same time
    - When (about 5 sec) Warning screen appears, release Volume Down and Power, then (a bit later) Home
    - press Vol Up (You'll get Odin mode screen)
    - Browse the 3 tar files to odin PDA=PDA_xxxx.tar, PHONE=MODEM_ or PHONE_xxxxx.tar, CSC=CSC_xxxxx.tar
    - no PIT and/or BOOT files required - leave it empty!
    - leave all other fields and checkboxes default!
    - connect your phone, You must see yellow 0:[COMxx] in the first ID:COM and "Added" in the message box
    - Start flashing by the START button.
    - flashing will start immediately, see the progress in the message box, and progress bar on the phone
    - Wait 1-3 minutes, until green PASS! in the upper left
    - SGY will reboot, leave it as is for 2-5 minutes until startup finishes
    - if it stuck (eg boot anim loop) then:
    - Start the phone in Recovery mode
    - remove battery
    - resinsert battery, wait 30 sec
    - press Vol Up, Home, Power at the same time
    - when Galaxy Y logo appears, release the Power button
    - when Recovery menu appears, release the Home button first, then finally Vol Up
    - select wipe data/factory reset (Vol UP/Down + Home)
    - select reboot system now
    When Android boots up, it's highly recommended to set your CSC via the dialer *#272*_your_imei_# (to see IMEI type *#06# in dialer) -> (it will erase all your data on the phone, but not the SD card)



    Known Issues


    - DDLA3 :minor CSC file corruption. may cause boot loop after flashing via Odin -> CSC corrected -> full pack replaced
    - DXLA1 : 1 report (of 150+ download) on unrecoverable boot loop after flashing - reason unknown
    - as of 10th of April I made some changes in the firmware pack: files are md5 secured and update packs are wipe versions. It means you suffer "factory reset" by flashing new firmware, but this way there is minimal occurrence of boot loop after a flash.
    124
    FAQ

    F.A.Q.

    Q: I'm requesting x or y provider/country's ROM version to restore my phone's original state
    A: In case You have a specific request, please post your PCODE from *2767*4387264636# and full version info from dialer *#1234# of your original ROM version. If you don't have this (already left original ROM) , then ask someone who has the same device with same provider/country! Check availability on http://fus.nanzen.se If you're smart enough, you can download the FUS file, then convert it by SplitFUS2.
    If converting is difficult to you, then post it here or PM me.
    Withoout PCODE and full HIDSWVER I can't help you!
    plan B for finding original HIDSWVER
    If you have Kies installed, and connected your phone with the original firmware, you have good chance to find it in Windows registry:

    Start regedit.exe and check under the key HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB...
    there should be some numbered sub-keys, eg 1, 2, 3, etc...
    Under the numbered keys, look for "HIDSWVER" It has the following format:
    I9100XWKI4/I9100OXXKI2/I9100XXKI1/I9100XWKI4
    Notice the ProductCode key at the same page, it's useful to search for FUS packages at http://fus.nanzen.se

    Q: Flashing any firmware to my phone will erase the network lock?
    A: NO. The network (or SIM) lock still remain active. By flashing firmware you can't deactivate the lock. It's stored elsewhere.

    Q: Flashing an operator specific firmware will restrict my open phone to that operator's network?
    A: NO. Your phone still remain open for any SIM. Operator specific builds usually containing "only" bloatwares, wallpapers and/or browser settings, etc...

    Q: Is it possible to update the PDA or MODEM only
    A: Yes, You can update any one component independently if you have a good reason for, but remember: recommended to have consistent components

    Q: Where is the bootloader tar and pit file?
    A: those are not used for a Kies like update. You can find totoro*.pit and bootloader in other S5360 firmware bundles, and use if you really need it, but not necessarily needed for flashing

    Q: Do I need to tick repartition?
    A: NO! Leave all check-boxes as default!

    Q: Really??? Do not tick repartition?
    A: REALLY, I told You! Leave it unticked!!! ...And leave bootloader empty as well! COPY THAT?!?!?!

    Q: Will Odin increase my custom bin counter flashing these packs?
    A: No. Custom bin counter increased in case, when you flash non-stock firmware. Bundles provided here are all stock files.

    Q: Wipe vs Non wipe packs?
    A: Wipe pack has been build including an empty userdata partition, that way flashing a wipe pack will erase your user data.
    Usually wipe packs has less issues after flashing, that way as of 10th of April I've decided to post here wipe packs only.

    Q: I've got no issues in the past with non wipe packs. I want to flash new firmwares by having my data untouched. Can I modify wipe pack to non wipe pack?
    A: Yes: Rename PDA*.tar.md5 to *.tar, then remove the userdata.img file! Don't forget to backup, because non wipe packs sometimes leads you to boot loop, and the solution is wipe data/cache.

    Q: Which CSC to chose?
    A:

    OXX:
    ATO Austria
    AUT Switzerland
    COS Greece
    CPW UK & IRE
    CYO Greece
    EIR Ireland
    EUR Greece
    FOP SPAIN
    ITV ITALY
    MOO AUSTRIA
    PAN Hungary
    PHE SPAIN
    TPH portugal
    XEF France
    XEH Hungary
    XEO Poland
    XEU UK & IRE
    XEZ Czech Republic
    XSK Slovakia

    OXF:
    ALB Albania
    CNX Romania
    COA Romania
    ERO Bosnia
    GBL Bulgaria
    MOT Slovenia
    MSR Serbia
    PMN Montenegro
    SIM Slovenia
    TMT Montenegro
    TOP Serbia
    TRA Croatia
    TWO Croatia

    OXE:
    ALO Ukraine
    FTD Ukraine
    MBC Mongolia
    MSG Ukraine
    SEK Ukraine
    SER Russia
    SKZ Kazakhstan
    VHC Ukraine

    ODD:
    ETR Bangladesh
    INS India
    INU India
    NPL Nepal
    SLK Sri Lanka
    TML Bangladesh

    OLB:
    GLB PHILIPPINES
    MM1 SINGAPORE
    SIN SINGAPORE
    SMA PHILIPPINES
    STH SINGAPORE
    THL THAILAND
    XEV VIETNAM
    XME MALAYSIA
    XSE INDONESIA
    XSP SINGAPORE
    XTC PHILIPPINES
    XTE PHILIPPINES

    OJP:
    ABS TUNISIA
    AFG Afghanistan
    BTC Libya
    EGY Egypt
    JED KSA
    KSA KSA
    MAT MOROCCO
    MED MOROCCO
    MID IRAQ
    MMC Libya
    MRT Mauritania
    MWD MOROCCO
    PAK PAKISTAN
    THR IRAN
    TMC Algeria
    TUN TUNISIA
    WAN MOROCCO
    XSG UAE
    XSS UAE

    OJV:
    AFR Kenya
    ECT Nigeria
    FWD MOROCCO
    KEN Kenya
    TUR TURKEY

    In case not found your CSC, look here
    21
    It sucks big time that hotfile has been taken down! But..... I still had some firmware packages on my laptop. I uploaded them, for the one who needs it, to Mediafire.

    I hope I can make a few people happy with this :fingers-crossed:

    S5360_DDLE1_ODDLD1_DDLE1_wipe_by_SplitFUS2.zip - Bangladesh, India, Nepal, Sri Lanka - Download link
    S5360_DXLB1_XSELB1_DXLB1_by_Doky_rev1.zip - Indonesia, Malaysia, Philippines, Singapore, Vietnam - Download link
    S5360_DXMA1_QLBMA1_DXLL1_wipe_by_SplitFUS2.zip - La Fleur - Download link
    S5360_DXMJ1_OLBMJ1_DXMI1_wipe_by_SplitFUS2.zip - DXLF2 Kies Update - Download link
    S5360_XXMC2_OXXMC2_XXMC2_wipe_by_SplitFUS2.zip - European Multilanguage Build - Download link
    S5360_XXLK1_OXFLK1_XXLH2_wipe_by_SplitFUS2.zip - European Multilanguage Build - Download link
    S5360_DXLJ1_OLBLG1_DXLI1_wipe_by_SplitFUS2.zip - Indonesia, Malaysia, Philippines, Singapore, Vietnam - Download link
    S5360_DXLF2_OLBLG1_DXLF1_wipe_by_SplitFUS2.zip - Indonesia, Malaysia, Philippines, Singapore, Vietnam - Download link
    S5360_JPLC1_OJPLC1_XXLC1_by_Doky.zip - Arabic Release - Download link
    S5360_DXLC1_OLBLA1_DXLC1_by_Doky.zip - Indonesia, Malaysia, Philippines, Singapore, Vietnam - Download link
    S5360_DXLB1_XSELB1_DXLB1_by_Doky_rev1.zip - Indonesia, Malaysia, Philippines, Singapore, Vietnam - Download link
    S5360_XXLF1_OJVLF1_XXLF1_TUR.zip - Turkey - Download link

    4shared links:

    S5360_DXLL1_OLBLL1_DXLL1 - Indonesia, Malaysia, Philippines, Singapore, Vietnam - Download link
    S5360_DXLA1_OLBLA1_DXLA1_by_Doky.zip - Indonesia, Malaysia, Philippines, Singapore, Vietnam - Download link
    S5360B_UTKL2_ZTOKL2_UTKL2_by_Doky.zip - Brazil - Download link
    16
    *#272*[your IMEI]# will wipe all data and "rebrand" the phone to some specific vendor. it will install wallpaper with company logo, company APN and stuff like that.
    Yes, you're right, ... but...

    There are country specific CSC codes, and there are provider specific CSCs as well .
    For example, my country code is XEH, which CSC contains all the providers in the country. (I suppose) these country wide CSC's does not contains provider specific bloatwares, only basic parameters like voicemail number, APN, browser homepage etc... "Rebranding" requires provider specific CSC like PAN or VDH in my case.
    I wonder, whether
    EIR = Ireland
    AUT = Austria
    XSK = swedish
    XEF = french ? :confused:
    XEF is a french county specific CSC, contains the setup for the following carriers:
    • Orange F
    • F SFR
    • SFR RU
    • BOUYGTEL
    • NRJ (SFR)
    • Virgin
    • Tele2
    • Auchan
    • Carrefour
    • NRJ (ORANGE)
    • Orange (340 01)
    • Orange (647 00)
    • Simplicime
    • Leclerc
    • Digicel
    • CORIOLIS
    • CORIOLIS
    • Keyyo Mobile
    • La Poste Mobile
    • LTI telecom
    • Darty Mobile

    ---edit----
    furthermore

    EIR = Ireland: eMobile
    AUT = Switzerland: Sunrise, Swisscom, Orange CH
    XSK = Slovakia: Orange, T-Mobile SK, O2 - SK
    ---edit----

    There are several sources of lettercodes webwide, If you're confsed, search for it!