Download the official a500 OTA ICS upgrade

Search This thread

OldGaf

Senior Member
Feb 6, 2008
337
89
Out of band width.... check here for download:
http://xdaforums.com/showpost.php?p=25590039&postcount=131

======================================================================

Here ya go... worked fine for me but no guarantees.... as usual, use at your own risk.

update.zip <- will work for a bit again (as of June 2 2012)

Lets see how long the bandwidth lasts!

Big thanks to t_r_j for sending me the file.

t_r_j:
Downloaded Acer_A500_7.014.02_041.205.01_COM_GEN2
.....
Image version after install
Acer_AV041_A500_RV05RC01_PA_CUS1
Build number
Acer_AV041_A500_1.033.00_PA_CUS1
 
Last edited:

lyme

Member
May 2, 2011
24
5
Victoria
So you just did:
1/ rename the file as : update.zip
2/ place the file on the micro sd card
3/ turn off the tablet
4/ press the down volume key and the power button at the same time untill the tablets turns on
5/ the iconia will start the upgrade process by itself.

To install this one? I wonder if it will work on a com_gen1..
 

OldGaf

Senior Member
Feb 6, 2008
337
89
So you just did:
1/ rename the file as : update.zip
2/ place the file on the micro sd card
3/ turn off the tablet
4/ press the down volume key and the power button at the same time untill the tablets turns on
5/ the iconia will start the upgrade process by itself.

To install this one? I wonder if it will work on a com_gen1..

Yes.... that's what to do.

Should work on gen1... mine was gen2 on 3.2
Then I used all the leaks that were gen1
Now I am cus1 :rolleyes:
 
  • Like
Reactions: Opt1mu5Pr1m3

MDPuckett84

New member
Jun 8, 2006
2
0
Thanks a ton! I had the WW_GEN1 leaked ICS from March and wasn't receiving the OTA. This installed perfectly using the method described
 

drung0418

Member
Apr 27, 2011
9
4
Thanks for t_r_j & OldGaf!
This image file really helps.

Compare to ICS COM_GEN1 image file, PA_CUS1 did not bind EC firmware update in it.
Maybe it will (or won't? :D) cause some problems and we will know it later. :)
 

drung0418

Member
Apr 27, 2011
9
4
Maybe I should use "include"...

For Acer_A500_1.031.00_WW_GEN1 image file, it also include "EC firmware" update binary in EC\ec.rom & EC\EC_flash and it will done in update progress.

But related binary did not include in PA_CUS1 image file.

I don't really know why they remove EC firmware update in PA_CUS1 image...
Maybe they already done this in 3.1 or 3.2 update for COM_GEN2 user before?

Anyway, I 'll use this image as well. :)

You really did a great jobs, thanks again!
 

t_r_j

Senior Member
Apr 12, 2012
72
12
What is the EC firmware update for?
I don't know what the EC firmware is.
Can you educate me?
 

riro56

Senior Member
Jul 20, 2010
275
36
update problem

Hi, I've downloaded the update.zip file, copy to sd card but do I must unzip the file in the SD car or keep the file in zip mode. When I push on Power and down volume key , the a500 start normaly, without a recovery screen or update

Please Help

Thank !:)
 
  • Like
Reactions: Mrss. Luo

OldGaf

Senior Member
Feb 6, 2008
337
89
Hi, I've downloaded the update.zip file, copy to sd card but do I must unzip the file in the SD car or keep the file in zip mode. When I push on Power and down volume key , the a500 start normaly, without a recovery screen or update

Please Help

Thank !:)

Leave as zip... must be in the root of SD... not in any folder.
Press and hold until u c small writing on screen.
Make sure is vol down.... not up.
Do while power is plugged in.
 
Last edited:

drung0418

Member
Apr 27, 2011
9
4
EC = Embedded Controller
It's a silicon chips used for low level power control in computer systems.

EC Firmware, the software who really control the EC working, it works independent to the operation system.

EC Firmware Update, update new EC firmware which include bugfix, bugfix, bugfix and bugfix...
Sometimes OS will require specific EC firmware version to implement some special method, but that is another case.

Because EC firmware update means there is bugfix or control method update in it.
That's why PA_CUS1 did not include these files really make me confused. :confused:
 

t_r_j

Senior Member
Apr 12, 2012
72
12
Leave it zipped.
You must press and hold the power button and the volume down button at the same time.
When you see the acer sign release just the power button.
Then you will see erasing cache now let go of the volume down button.
The volume down button is the button nearest to the power button.
Hope this helps.

---------- Post added at 07:40 PM ---------- Previous post was at 07:35 PM ----------

EC = Embedded Controller
It's a silicon chips used for low level power control in computer systems.

EC Firmware, the software who really control the EC working, it works independent to the operation system.

EC Firmware Update, update new EC firmware which include bugfix, bugfix, bugfix and bugfix...
Sometimes OS will require specific EC firmware version to implement some special method, but that is another case.

Because EC firmware update means there is bugfix or control method update in it.
That's why PA_CUS1 did not include these files really make me confused. :confused:
Thanks for the info!
That is strange that it is in one update and not the other.
Maybe one of the "power/guru developers" can explain why?
 
  • Like
Reactions: Opt1mu5Pr1m3

lyme

Member
May 2, 2011
24
5
Victoria
Yes.... that's what to do.

Should work on gen1... mine was gen2 on 3.2
Then I used all the leaks that were gen1
Now I am cus1 :rolleyes:

For better or worse I updated my A500 and while the update worked, I ran into the dreaded reboot loop. To fit is I had to do a factory reset on my tablet (maybe there is another way?). Now I'm copying everything back to my tablet (because I copied all the visible folders to my pc before starting).

I've likely lost my paradise island progress and swtor keygen save stuff.

Was: Acer_A500_7.014.14_com_gen1
Now: Acer_AV041_A500_RV05RC01_PA_CUS1

Regardless, everything else seems fine.
 

UniSonBBS

Member
Apr 17, 2012
12
0
Worked for me, upgrade me from Leaked ICS 0.09 or whatever it was. Im glad to see this work as I could not receive the OTA push.
 

spud357c

Member
Apr 16, 2011
22
1
Worked perfectly for me - only thing that isn't working so far is Tiger Woods 2012.
Have tried everything but am now guessing it isn't compatible with ICS.
Anyone else encounter this?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 22
    Out of band width.... check here for download:
    http://xdaforums.com/showpost.php?p=25590039&postcount=131

    ======================================================================

    Here ya go... worked fine for me but no guarantees.... as usual, use at your own risk.

    update.zip <- will work for a bit again (as of June 2 2012)

    Lets see how long the bandwidth lasts!

    Big thanks to t_r_j for sending me the file.

    t_r_j:
    Downloaded Acer_A500_7.014.02_041.205.01_COM_GEN2
    .....
    Image version after install
    Acer_AV041_A500_RV05RC01_PA_CUS1
    Build number
    Acer_AV041_A500_1.033.00_PA_CUS1
    4
    I am in the US eastcost. This is my info from the Tablet I captured the image from.

    Before: 3.2.1 Acer_A500_7.014.02_COM_GEN2
    After: 4.0.3 Acer_AV041_A500_1.033.00_PA_CUS1
    3
    EC = Embedded Controller
    It's a silicon chips used for low level power control in computer systems.

    EC Firmware, the software who really control the EC working, it works independent to the operation system.

    EC Firmware Update, update new EC firmware which include bugfix, bugfix, bugfix and bugfix...
    Sometimes OS will require specific EC firmware version to implement some special method, but that is another case.

    Because EC firmware update means there is bugfix or control method update in it.
    That's why PA_CUS1 did not include these files really make me confused. :confused:
    2
    So you just did:
    1/ rename the file as : update.zip
    2/ place the file on the micro sd card
    3/ turn off the tablet
    4/ press the down volume key and the power button at the same time untill the tablets turns on
    5/ the iconia will start the upgrade process by itself.

    To install this one? I wonder if it will work on a com_gen1..
    2
    Hi, I've downloaded the update.zip file, copy to sd card but do I must unzip the file in the SD car or keep the file in zip mode. When I push on Power and down volume key , the a500 start normaly, without a recovery screen or update

    Please Help

    Thank !:)

    Leave as zip... must be in the root of SD... not in any folder.
    Press and hold until u c small writing on screen.
    Make sure is vol down.... not up.
    Do while power is plugged in.