i9192 hard bricked

Search This thread

jhetz09

Member
Apr 12, 2014
17
3
also this:
@dovakinn

does it have to do with the USB debugging thing? is your usb debugging ticked when you made the .img file? not sure just searched around about that.

UPDATE:

BOOT RECOVERY MODE
CHECK BOOT PARTITIONS
COPY FROM T-FLASH
BOOT RECOVERY
WRITE 139008 SECTORS
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9192
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 1
WRITE PROTECTION: Enabled
MMC: mmc_read fail(after trying to flash with or without pit)
SECURE CHECK FAIL: PIT

still fail. can't go to download mode. still getting pits error

this is what I do.
I put SDcard on bricked phone and flash it with the latest firmware on AP Box from the model of my phone which is KSA-I9192XXUAMH3 and it asks for pit file and whenever I put in the pit file I still get the same error. I dunno if the problem is the .pit file or what. do you guys have a .pit that I can also try?
 

Attachments

  • Capture.PNG
    Capture.PNG
    84.6 KB · Views: 1,887
Last edited:

dovakinn

Senior Member
Mar 13, 2014
69
15
also this:
@dovakinn

does it have to do with the USB debugging thing? is your usb debugging ticked when you made the .img file? not sure just searched around about that.

take out your battery for 5 to 10 mins atleast, then try to boot into d/l mode also UNCHECK repartition.

not sure about usb debugging but i keep it on mostly.
 

slpknt666

New member
Feb 26, 2013
2
0
well finally i was on stable connection , here is the my debrick image this also made from the guide http://xdaforums.com/showthread.php?t=2625628 suggest you use this to write to your SD http://xdaforums.com/showthread.php?t=2600869 and if your cell boots try go imd into download mode and flash your stock rom ,

this from firmware I9192DDU1BML1 , btw this img was created after i had deleted knox and other bloat ware from the rom , hope it helps.

https://www.dropbox.com/s/i6ul61hisnvrjog/debrick.img

Link Down.. u can re upload please!!!
 

Edinhox

Senior Member
Sep 27, 2009
59
4
I wonder if usb jig will work with the sd card methoD?

i have the same problem with my i9195, and i also own a jig the only difference between the phone starting with jig and without is that with jig it says factory mode instead of odin mode and they have the same purpose.

both modes get detected in odin and same problem occurs, that the pit is missing but i have tried 3 different types of pit. all which should come from a i919x phone.

<ID:0/013> Added!!
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Get PIT for mapping..
<ID:0/013>
<ID:0/013> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

And on the phone it shows either, PIT FAIL : TOTAL SECTORS (0) or SECURE CHECK FAIL: PIT followed by ODIN: flash read failure
 
Last edited:

titou_96

Member
Apr 25, 2015
7
0
well finally i was on stable connection , here is the my debrick image this also made from the guide http://xdaforums.com/showthread.php?t=2625628 suggest you use this to write to your SD http://xdaforums.com/showthread.php?t=2600869 and if your cell boots try go imd into download mode and flash your stock rom ,

this from firmware I9192DDU1BML1 , btw this img was created after i had deleted knox and other bloat ware from the rom , hope it helps.

https://www.dropbox.com/s/i6ul61hisnvrjog/debrick.img

Link dead please create other
 

tattoum

Account currently disabled
Mar 5, 2011
10
0
GB
please send working link for debrick.img of i9192 the last link is dead thx
i have one dead phone
 

marcosgdias

Member
Mar 31, 2016
29
2
Rio de Janeiro
Please, can anyone help me?

My S4 Mini Duos I9192 doesn't enter in Download Mode. I put the correct debrick.img in sdcard and turned. Follow the messages from S4 screen and Odin:

BOOT RECOVERY MODE
CHECK BOOT PARTITIONS
COPY FROM T-FLASH
BOOT RECOVERY
WRITE 139008 SECTORS
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9192
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X0
CSB-CONFIG-LSB: 0X30
BOOTLOADER AP SWREV: 2
WRITE PROTECTION: ENABLED

Exactly what says by odin:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9205ZHUCML4_I9205ZZHCML4_I9205ZHUCML4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
and on phone it writes this following previous tag :
Code:
MMC: mmc_read fail
ODIN : flash read failure
 

Attachments

  • 2016-05-25.jpg
    2016-05-25.jpg
    163.1 KB · Views: 572
Last edited:

andreluigo

Senior Member
Jun 1, 2013
180
22
Please, can anyone help me?

My S4 Mini Duos I9192 doesn't enter in Download Mode. I put the correct debrick.img in sdcard and turned. Follow the messages from S4 screen and Odin:

BOOT RECOVERY MODE
CHECK BOOT PARTITIONS
COPY FROM T-FLASH
BOOT RECOVERY
WRITE 139008 SECTORS
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9192
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X0
CSB-CONFIG-LSB: 0X30
BOOTLOADER AP SWREV: 2
WRITE PROTECTION: ENABLED

Exactly what says by odin:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9205ZHUCML4_I9205ZZHCML4_I9205ZHUCML4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
and on phone it writes this following previous tag :
Code:
MMC: mmc_read fail
ODIN : flash read failure

Did you or anybody get a solution?
 

fhmurakami

New member
Jul 3, 2016
2
1
Londrina
Please, can anyone help me?

My S4 Mini Duos I9192 doesn't enter in Download Mode. I put the correct debrick.img in sdcard and turned. Follow the messages from S4 screen and Odin:

BOOT RECOVERY MODE
CHECK BOOT PARTITIONS
COPY FROM T-FLASH
BOOT RECOVERY
WRITE 139008 SECTORS
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9192
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X0
CSB-CONFIG-LSB: 0X30
BOOTLOADER AP SWREV: 2
WRITE PROTECTION: ENABLED

Exactly what says by odin:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9205ZHUCML4_I9205ZZHCML4_I9205ZHUCML4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
and on phone it writes this following previous tag :
Code:
MMC: mmc_read fail
ODIN : flash read failure
@marcosgdias can you send a link for the debrick.img you used, please?
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    My i9192 s4 mini got hard bricked while charging I don't know how or why it happened..

    I found this somewhere in the forum.. can anyone make me a dump file for i9192 because I don't know anyone who has the same phone as me so I'm asking for help. I tried to bring it to a programmer but they said they have to j-tag it for 3days up to a week. but I don't want to leave my phone on other people's hand so I'd rather fix this myself.

    help would be really really appreciated. TIA

    initial situation:
    - we have a brick with killed bootloader after unsuccessful flashing, not turning on, no reaction on buttons, no any mode available (recovery, download).

    What is needed:
    - any Linux, like Ubuntu, but more convinient is PartedMagic of any version;
    - MicroSD card;
    - working phone of the same model or dump of its first 139008 blocks (about 70MB).

    How to make a dump:
    - on rooted device download from Google Play app "TerminalEmulator" and run it;
    - Enter su, appears "root@android:/ #", enter "dd if=dev/block/mmcblk0 of=sdcard/mmcblk0uptop7.img count=139008";
    - after completion copy file "mmcblk0uptop7.img" from the phone to PC, for example to drive C:/.

    How to revive the phone:
    - insert MicroSD into PC and launch "PartedMagic";
    - copy dump to MicroSD, for this open Terminal, we see "root@partedmagic:~#", enter "dd if=/media/WIN7/mmcblck0uptop7.img of=/dev/mmcblk0", where "/media/WIN7/" - it's your drive C:/, where stored a dump, and "/dev/mmcblk0mmcblk0" - your MicroSD in PartedMagic;
    - wait for completion, remove MicroSD;
    - put MicroSD to non-working phone, connect the phone to PC using USB;
    - if all steps are done correctly, phone will boot by pressing the keys, using bootloader from external MicroSD;
    - now it is possible to re-flash internal eMMC using Odin, to make a possibility to remove external card;
    - that's all, phone completely revived.

    Supported devices:
    - tested on i9190, will work on i9192/i9195, should work on smartphones of other brands with new Qualcomm chips.

    Technical details:
    - details are too big to write. If you are interested - read about MSM8930 boot architecture and etc.

    Some conclusions:
    - Qualcomm has made a good modern chip, with a lot of feasibility, but not placing many information to open sources;
    - Samsung - trying to complicate life of users by integrating of its own digital signature, what is leading to immediate bricking of devices when trying to modify bootloader. Be careful.

    Update:
    Please try to send me an unbrick.img file from a stock i9192 that came from Saudi.. but if not from Saudi at least a stock ones..

    If someone could send me a full or even half image file from a i9192 stock device

    thank you.
    2
    I'll upload mine when I get to the office

    Sent from my GT-I9192 using Tapatalk
    1
    now that you have a debrick image follow this guide , hope it helps.

    http://xdaforums.com/showthread.php?t=2600869

    btw you don't need to follow step 2.2 of that guide
    1
    well finally i was on stable connection , here is the my debrick image this also made from the guide http://xdaforums.com/showthread.php?t=2625628 suggest you use this to write to your SD http://xdaforums.com/showthread.php?t=2600869 and if your cell boots try go imd into download mode and flash your stock rom ,

    this from firmware I9192DDU1BML1 , btw this img was created after i had deleted knox and other bloat ware from the rom , hope it helps.

    https://www.dropbox.com/s/i6ul61hisnvrjog/debrick.img