[KERNEL]Droid DNA Cubed Kernel v3.1.3[02.13.13]Up to 3.4.30 and a few minor fixes.
- Thread starter dsb9938
- Start date
-
- Tags
- development
not working... i dont know why... i tried to wipe dalvik and reinstall modules also... only my power button works to wake
Works here :beer:
Make sure you start on just before the back arrow and go all the way to home
reverse for off From my DROID DNA
I tried reinstalling everything the kernel is showing in my system info... Are the module files supposed to show a modify date of August or December?
Sent from my HTC6435LVW using Tapatalk 2
---------- Post added at 01:36 AM ---------- Previous post was at 01:12 AM ----------
Ok I got it to work but I had to install tuner kernel... It was default set on start with back end with back... I made it start with back end with menu... Requires a full sweep to lock/unlock works great now... Not sure why I was the only one with a problem
Sent from my HTC6435LVW using Tapatalk 2
Sent from my HTC6435LVW using Tapatalk 2
---------- Post added at 01:36 AM ---------- Previous post was at 01:12 AM ----------
Ok I got it to work but I had to install tuner kernel... It was default set on start with back end with back... I made it start with back end with menu... Requires a full sweep to lock/unlock works great now... Not sure why I was the only one with a problem
Sent from my HTC6435LVW using Tapatalk 2
Did you flash the modules file in recovery like the instructions say, or push them manually?
If you did it manually, you didn't get everything that was supposed to be installed and I cannot say what will and will not work right.
D
.
for some reason whenever I'm in a call and the screen turns off for more than a minute the touchscreen stops working
Like have to reboot stops working, or have to hit the pwr btn to get the screen back?
D
.
Like the screen turns on and power/volume buttons respond. But I have to reboot to actually press something on the touchscreen.
Woke up to a locked up phone. Amber led was solid, capacitive keys would light up but had to do a hard restart for the screen to light up. Did not have this problem with V1.
Just to clarify, this post was to help troubleshoot, not a complaint! Keep up the good work, and thanks again!
Just to clarify, this post was to help troubleshoot, not a complaint! Keep up the good work, and thanks again!
Last edited:
v2
First, Thanks for this.
On version 1.0.2, when the screen is off and i brush more than 2 fingers from the middle of the screen across the sensor at the top then it vibrates, then when i turn the screen on the the s2w the program "HTC Media LInk HD" is open.
Also the touch screen was unresponsive once and i couldn't unlock. i was going to reboot, but decided to try the "clean the lint off" wipe that i described above and then the touch screen was responsive again.
Hope this helps with any troubleshooting. Thanks again for this, i'm still going to use it all day.
First, Thanks for this.
On version 1.0.2, when the screen is off and i brush more than 2 fingers from the middle of the screen across the sensor at the top then it vibrates, then when i turn the screen on the the s2w the program "HTC Media LInk HD" is open.
Also the touch screen was unresponsive once and i couldn't unlock. i was going to reboot, but decided to try the "clean the lint off" wipe that i described above and then the touch screen was responsive again.
Hope this helps with any troubleshooting. Thanks again for this, i'm still going to use it all day.
So apparently V2 is having problems?
Sent from my Droid DNA. 1080p never looked so sweet.
I have awakened. Hopefully someday you do the same!
Sent from my Droid DNA. 1080p never looked so sweet.
I have awakened. Hopefully someday you do the same!
Media link is on all HTC phones and is controlled by a three finger gesture from the middle to the top of the screen
Sent from my HTC One S using xda app-developers app
Screen constantly becomes unresponsive for me as well. I get hard reboot for it to work, for a little bit anyway.
I just got a phone call. When the call ended, I ran into the same issue. Touchscreen was disabled. Rebooting fixed it.
Not sure if its the kernel my phone or setcpu but everytime I open set cpu it always shows max and min frequency at the highest clock then it'll revert back to normal within a couple seconds . Does this mean the clock is sticking to max all the time ?
Also sane thing with me with the lock screen I got off the phone and touches were unresponsive had to reboot
Also sane thing with me with the lock screen I got off the phone and touches were unresponsive had to reboot
Last edited:
I am having same problem of unresponsive touchscreen after a phone call.
Last edited:
Similar threads
- Locked
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
120Okay folks, no fancy graphics or information here. Searching this site will tell you any of the generic information you may be interested in. I am not going to clutter up things any more than I normally do. Which is already enough.
I need to make something very clear here. I'm sure it's just me, but I feel like I need to say it out loud, rather than just leaving it in my source. At least 90% of what I give you is other peoples original work, modified by me to run on whatever device I have. I don't do it to look smart, or be important, I do it 9 times out of 10 because there isn't something already out there. The vast majority of the options I give you are from amazing coders like show-p1948 and faux123. There are random snippets from others too. This time Zarboz contributed a lot in the beginning. I just wanted to make that clear. If you ever wanna know exactly who did something I put into a kernel, go look at the source. If I cannot get the original commit, with them as author, they are listed in the comment. If nobody is there but me, I actually did it.
So, here you go:
Droid DNA Cubed Kernel 3.1.3
Installation:
1. Unzip the file you downloaded.
2. Copy the Modules zip to the SDCard.
3. adb reboot bootloader
4. fastboot flash boot <file> (This will depend on where you unzipped to.)
5. Use menu on phone to go to recovery.
6. Flash Modules file in recovery.
7. Reboot
8. Profitt!
Please Note: This kernel removes some stock files you will need to use other kernels. Please flash this file before flashing anything else to return everything to stock.
Change Log:
Downloads:
Droid DNA Cubed Kernel 3.1.3
MD5: f4ffcf4d75bf50f2c8458b10e6f6d2a9
Droid DNA Cubed Kernel 3.1.1
MD5: b1cfca9364d652b32827abe348f7bcb3
Droid DNA Cubed Kernel 2.5.4
MD5: f5bedb1d659e7d968e5c44c562cc8425
Enjoy!
D
.
My Git
17Just wanted to let you all know I am still around.
Thanks sooooo much to all of you who helped me keep the lights on. I think I have made an arrangement that will keep that going.
I'm sorry to have let my soap opera of a life leak onto this thread, but I didn't want to just disappear if the power went off.
I continue to await new source from HTC so I can update this thing.
In the mean time I will be off looking for ways to feed myself, so don't think I have abandoned you. Things are still very tough here. But I am still around.
And thanks again for all the help! You guys literally kept my lights on at a time when I expected to be living in the cold and dark.
D
.16New card in. Let the games begin!
I will be posting test versions in the OP as I rebuild.
I will rely on your feedback for progressing.
I don't want to know about anything but reboots/lockups/SODs or things that don't work right.
Look for the first one late tonight or early tomorrow.
D
.14
You sir, are the reason I will be releasing nothing else. I hope you feel like a big man man now. Merry Christmas.
D
.
New posts
-
-
-
-
[UNOFFICIAL][ROM][14] LineageOS 21- Latest: Skyblueborb
